Can't connect any devices to wifi through actiontec C200a modem

We have centurylink actiontec c2000a modem at work. this is the 4th modem in the last year and a half. Haven't been able to get the wifi to work on any of them. Any suggestions? Thanks

First, make absolutely, positively sure that the password you are using is current (not a correct but old password) and entered correctly. Note that case is significant in passwords (i.e., a is not the same as A), and look out for look-alike characters (O vs 0, 1 vs l, etc.).
If all seems OK try restarting your WiFi router by removing power to it for 30 seconds.

Similar Messages

  • After downloading the latest Itunes software, I can't connect any device to Itunes!

    After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!

    i am using windows 8 and still can't find my iphone on itunes

  • Bluetooth does not work, i can't connect any device

    bluetooth does not work, i can't connect any device

    What device?
    Iphone supports bluetooth for stereo headsets/speakers, handsfree telephone devices/headsets, some keyboards, some peer-to-peer apps from the app store, adn internet tethering where provided by the carrier.
    Other than this it will not connect to another phone, computer ,device

  • Guestnetwork is visible but I can not connect any device

    Hi there,
    I us an Airport Time Capsuale, Version 7.7.1.
    I created a Guestnet, all fine so far.
    Now I try to connect with my Iphone or Ipad to test it and I can not connect.
    I can see the Guestnet, I type in the password and the device is trying to connect. trying trying trying but not connecting.
    Going back to my private Network, all fine, direct connection.
    Any idea what is missing or happening to work proper?
    Thanks and best regards,
    Michael

    The first thing to check is the setting for Router Mode on the Time Capsule.
    Open AirPort Utility, click on the Time Capsule, click Edit, and click the Network tab at the top of the window.
    Check the setting for Router Mode.  If it is now set to "Off (Bridge Mode)" the Guest Network feature will not operate correctly in that setting.....unless....you have another Apple router on the network that is acting as the "main" router for the network.
    Can you provide the make and model number of your "modem"?
    It is possible that the Time Capsule needs to be in Bridge Mode to work correctly with your "modem".
    If this is the case, then unfortunately it will not be possible to enable the Guest Network feature using the modem that you have.

  • I can't connect my devices to wifi

    Hello. I've just set up an Airport Extreme and my iPhone and iPad don't get a connection to the wifi network just created. The name of the network is displayed, the password has been typed in but no connection is established.The router mode is off (bridge mode). I tried various reset, on the Airport, the router, the devices themselves, but uselessly.

    Read this:
    http://support.apple.com/kb/HT4628

  • I did allllll that is listed below, but when I get to sync iPad, it won't sync, what do I do? Preparation Before you connect any device to a new library go to the Devices tab

    THis is what I did, but when I get to sync, it won't sync.....what do I doLynnLynn
    Preparation
    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    If this device contains contacts or calendar items that are not already on the computer you are using, and that you wish to recover, then make sure you have at least one contact & one event in the applications that will sync with the device (e.g. Windows Address Book or Outlook under Windows, iCal & Address Book on a Mac).Dummy entries will do, but there must be at least one if the data is to be retrieved from the device in step 7 below.
    Transfer purchases
    You can transfer your iTunes Store purchases into a new library, after connecting the device, with the menu itemFile > Transfer Purchases from <Device>. You should be prompted to authorize the computer to your iTunes account if you have not already done so. If your device holds content from more than one account you will need to authorize each one.
    See also: HT1848 - iTunes Store: Transferring purchases from your iOS device or iPod to a computer.
    Back up (iOS only)
    If this is an iOS device you should now right-click on it (control-click on a Mac) in the left-hand column of the iTunes window and click Back Up to make a backup of the current settings and application data on the device.
    Recover other media
    iTunes only permits the transfer of iTunes Store purchases. If your device contains other media that you've ripped from CD or downloaded from other online stores you can either go back to the original sources or use third party software to extract your data from your device. There is a list of some of the software available below.
    Recover other purchases
    Your device may not have held all your iTunes Store purchases. You can recover qualifying purchases from your account by visiting the home page of the iTunes Store and clicking on the Purchased link in the Quick Linkssection in the right-hand column.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Restore (iOS only)
    Having backed up your device, and rescued all the media from it that you can, you should now restore the device from the backup that you took earlier to ensure that the device is properly associated with this new library. Right-click on it (control-click on a Mac) in the left-hand column of the iTunes window and click Restore from Backup...
    Sync
    Set up your preferences for syncing Music, TV Shows, Podcasts, Info etc. then click Sync. For a device that holds calendar or contact information you should be prompted to restore or merge. Click merge to copy this information into your computer. Your device is now properly associated with your new library and you shouldn't have lost any data.
    Backup your library
    For the future you should backup your library to a separate hard drive or network share as restoring a backup is much easier than the process above. The user tip Backup your iTunes for Windows library with SyncToy gives a suggested way of doing this effectively for Windows users. Mac owners can make use of Time Machine, or useCarbon Copy Cloner which does a similar job to SyncToy.

    This is the ipod touch forum.
    Try posting in the ipod nano forum.

  • I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list.

    I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?

    Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.

  • Can't connect to local MySQL server through socket '/var/mysql/mysql.sock'

    I'm using the pre-installed versions of php and mysql under Mac OS X Server 10.4.4 running on a G4 and am unable to get anything involving mysql to work.
    I ssh to the server and enter various commands in Terminal:
    on typing "mysql" I get
    ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2)
    and on typing "mysqladmin version" I get
    mysqladmin: connect to server at 'localhost' failed
    error: 'Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2)'
    Check that mysqld is running and that the socket: '/var/mysql/mysql.sock' exists!
    On typing "sudo mysqld_safe" I get
    Starting mysqld daemon with databases from /var/mysql
    STOPPING server from pid file /var/mysql/MyServer.local.pid
    070722 16:06:05 mysqld ended
    /var/mysql/MyServer.local.err contains
    070722 16:06:04 mysqld started
    070722 16:06:04 [Warning] Setting lowercase_tablenames=2 because file system for /var/mysql/ is case insensitive
    070722 16:06:04 InnoDB: Database was not shut down normally!
    InnoDB: Starting crash recovery.
    InnoDB: Reading tablespace information from the .ibd files...
    InnoDB: Restoring possible half-written data pages from the doublewrite
    InnoDB: buffer...
    070722 16:06:05 InnoDB: Starting log scan based on checkpoint at
    InnoDB: log sequence number 0 43634.
    /var/mysql has permissions 775.
    The line
    mysql.default_socket = /var/mysql/mysql.sock
    is in /etc/php.ini
    whereis mysqladmin ->
    /usr/bin/mysqladmin
    whereis mysql ->
    /usr/bin/mysql
    ls /var/mysql ->
    MyServer.local.err
    ib_logfile1
    mysql
    ib_logfile0
    ibdata1
    test
    Can't find my.cnf or my.ini anywhere
    Can't find mysql.sock anywhere
    I'm trying to get a bug database running (mantis) under Mac OS X Server 10.4.4 that I can access from local clients.
    I'm trying to follow directions at http://www.mantisbugtracker.com/manual/manual.installation.php
    without knowing anything about mysql or php and I'm stuck on step 3:
    "Next we will create the necessary database tables and a basic configuration
    file."
    I get a message saying
    "Does administrative user have access to the database? ( Lost connection to MySQL server during query )"
    I don't even know if following the mantis directions has resulted in the creation of a database or not. Where would it be?
    Thanks for any help.
    Intel iMac   Mac OS X (10.4.10)  

    I've just done a clean install of OSX Server and added the latest MYSQL packaged installer. Afterwards I found the lock file in /private/tmp/mysql.lock
    The easiest way to solve this problem is to create a symbolic link so that the lock file appears to be in right place.
    e.g.
    cd /var
    sudo mkdir mysql <== this assumes the directory is missing
    cd mysql
    sudo ln -s /private/tmp/mysql.sock mysql.sock
    After this msql commands should work fine, and you've not fiddled with the security settings on users/groups.
    HTH
    Christian

  • I got a new iPhone 5s and I am unable to connect to my home wifi (through Comcast/Xfinity).  I was able to with my 4s but not with my new 5s.

    I got a new iPhone 5s and I am unable to connect to my home wifi (through Comcast/Xfinity) network.  I was able to with my 4s with no problems but with my new 5s, I just get that a message that says "Unable to connect to network [network name]"  Thoughts on how to connect to the wifi network?  My laptop is connected and using the wifi just fine.

    I see the following instruction:
    Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    However when I get there I am offered a screen which states "Enter Passcode", and have no clue as to what this should be given I never had to set this in the first place.
    It expects 4 digit code, so any ideas?

  • "Can't connect to local MySQL server through socket '/tmp/mysql.sock'"

    Data Services=3.1
    Repository=12.2.2.0000
    Red Hat Enterprise 5
    Designer,Job Server,Job Engine=12.2.2.3
    After an unscheduled server reboot with DS up and running when trying to start a job in either Data Services Management Console or DS Designer getting the following:
    "Can't connect to local MySQL server through socket '/tmp/mysql.sock'"
    The mysql.sock have never been in /tmp and on the production server it does not exist there and the production server is up and running correctly. If a link is created to mysql.sock(/home/user/boedge31/bobje/mysql) the job will start but return this message: 
    "Cannot retrieve <Version> from the repository. Additional database information: <SQL submitted to ODBC data source <localrepo> resulted in error <MySQL ODBC 3.51 Driver mysqld-5.0.46-enterprise No database selected>. The SQL submitted is <select VERSION, SECURITYKEY, GUID from AL_VERSION where NAME = 'Repository Version'"
    I checked and AL_VERSION and the Version field exist. 
    Before the shut down DS was working correctly and had no issues.  My best guess is a part of the repository was corrupted during the unscheduled shut down.  It seems like DS has "forgotten" some of the settings.  
    Any suggestions on a possible solution?

    The issue has been solved. 
    There was a bad path in $LD_LIBRARY_PATH.
    Removed the path and DS started working again.

  • TS1373 how can i connect my iphone to computer through usb using windows 8?

    how can i connect my iphone to computer through usb using windows 8?

    If iTunes is installed, you just connect the iPhone to USB.
    http://support.apple.com/kb/HT1386
    You can also sync to iTunes using WiFi.

  • Can I connect window device like modem, mobile in oracle forms,if possible then how?

    Can I connect window device like modem, mobile in oracle forms,if possible then how?

    Hi Tony,
    So explain where you would see your notification?I just mention, Leave module, there are many other module. For example In Purchase Purchase Requigition , Production Module Production Complite , Delivery Module Delivery Ready.
    For this it will better to show at respective Menu.
    In the Window title?Another good Idea !
    You could have a timer trigger that runs every 5 minutes and checks a notification table, if there is an unacknowledged notifcation, then you could change the Window title of the formas app to show a (1) at then end of it.Timer has a bad this.. For example, if i make a timer and run every 5 min. then if user works on a form, timer will hide the form and show the timer window.
    Isn't it ?
    Would that do, or do you need more?Yea.. More..It will be like facebook. If any notified work is done by any person, light will go off.
    Thanks for your interest and suggestion...
    Ask2Learn
    Edited by: Asked to Learn on Jan 23, 2013 12:36 AM

  • I can't connect to AppStore using wifi (iPhone - iOS6)...HELP!

    That's incredible... from one week I can't connect to AppStore using WIFI anymore... just using 3G.
    So I don't download apps anymore!
    How can be that possible?? Anyother had the same problem??
    I've already reset conncetivity setting... and it doesn't still work!
    Please HELP!
    thanks a lot

    In the course of your troubleshooting to date, have you worked through the following document?
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC

  • Can not connect to my home wifi suddenly

    Suddenly I can not connect to my home wifi connection.  I have verified the password and I know that is correct.  Any suggestions?

    Also, I can connect just fine from my iPad just not my iPhone4s.

  • Can't connect any CVS server

    I can't connect any CVS server. every server i tried to download from , for example, when I compile from aur or abs I get "Connection timed out.
    even in arch CVS:
    $ sudo abs
    Password:
    Cannot connect to cvs.archlinux.org: Connection timed out
    Cannot connect to cvs.archlinux.org: Connection timed out

    I'm sure that I'm connected to the web.
    How can I check the CVS port? I don't use firewall.

Maybe you are looking for