Can't connect Canon HV20 to 2012 IMac

I have a Canon HV20 that my 2012 Imac will not recongnize. I'm using a 4pin to 9pin cable and the thunderbolt adapter.  In system info under Firewire I get
FireWire Bus:
  Warning:    Unable to list FireWire devices.
  Maximum Speed:    Up to 800 Mb/sec
Any ideas?

Went to radio shack and got a new cable, works fine now. The first cable was a Rocketfish cable. I guess it's a known issue with HV20 and the thunderbolt adapter that these cables have problems.

Similar Messages

  • Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

    remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
    does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
    or what's the problem,
    Mahmoud Sabry IT System Engineer

    this issue maybe will be fix by latest version, we still waiting for it
    maybe your issue can be fix using this methods
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
    http://shawn.meunier.com/?p=1#comment-43

  • Can i connect intel NUC to my imac 21.5 with thunderbolt cable

    can i connect intel NUC to my imac 21.5 with thunderbolt cable

    I have an Intel NUC with Thunderbolt and an iMac Late 2013 27" and I can't get this to work.
    Has anybody got this working??

  • I can´t connect Facetime calls from my Imac or Macbook pro, i can only make it from my iphone 4. why is that? in my imac and macbook pro i have OS X 10.8.5

    I can´t connect Facetime calls from my Imac or Macbook pro, i can only make it from my iphone 4. why is that? in my imac and macbook pro i have OS X 10.8.5

    FaceTime for Mac: Troubleshooting FaceTime - Apple Support

  • Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    Can iMac act like a target display? Can we connect a PC/MAC to iMac and can it just work like a monitor.

    It depends.

  • Can i connect skybox to my 2012 27" iMac

    I have a late 2012 27" imac and was wondering can i connect my xbox one or sky box to my imac
    I have a a cable that connects to thunderbolt and has hdmi input at other end.
    but can i use this an an input rather than an output.
    any help would be grateful.

    Welcome to Apple Support Communities
    You may have been able to do it with a Late 2009 or Mid 2010 27-inch iMac, but not with a Thunderbolt iMac. You need a special adapter to connect a games console to your iMac, and that adapter is not compatible with Thunderbolt iMacs

  • FME freezes when connecting Canon HV20 via firewire

    Hoping someone can help me out. I'm using a Canon HV20 camera
    as a live video stream via FME and every time I try FME will freeze
    and my laptop will freeze and I have to restart. My camera settings
    are DV standard and it should work.
    The necessary drivers for the Canon HV20 are installed and
    I'm using a firewire card in my PC laptop that to connect the
    camera feed. Restarting several times still results in the same
    problems.
    Is there something I should modify/check on my system to
    ensure it's working correctly?

    Some more troubleshooting tips.
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • Can't connect to volume of shared iMac but used to be able to

    I'm really hoping someone can help me with this as I've been struggling with it since my upgrade from Tiger to Leopard. I run OS X 10.5.2 (all updated,etc.) on two machines - an Intel Macbook and iMac, with an airport extreme base station (updated) as the router. Both are using the same account names, but have different computer names (B's Macbook, B's iMac, etc.). So, attached to the iMac is an external hard drive connected via FW800, split into two volumes (Time Machine, Video Library). When I first tried to share these after the upgrade to 10.5.0 I had various permission errors with that "Unknown" user account. That seems to have been all cleared up, and in fact the two aforementioned volumes (Time Machine, Video Library) are now completely new and on a new FW drive. Problem is, I can't connect to the "Video Library" from the Macbook, even though sharing is allowed and I can connect to the the "Time Machine" volume fine. It shows up in the finder sidebar, under the Macbook, but when I try to connect I get this..
    the operation cannot be completed because the original item for "Video Library" cannot be found
    When I view the iMac via the Samba share listed in the finder (since Windows Sharing is turned on via the iMac - and I tried turning this off, doesn't change anything) I see 8 volumes labeled video library, video library-1, video library-2, etc. all the way through video library-7. Now, I click on these and get the same error. But I am 99% sure that Leopard is confused and can't find the correct link to the Video Library because all of these dead links are still floating around somewhere, but I don't know how to clear it out and reset. In fact, I used to have the same problem sharing the Time Machine volume, but during one replacement of the hard drive, I changed the volume name from "Time Machine Drive" to just "Time Machine" and it of course started working fine, I can access the drive without problems, etc.
    So, after all of that explaining, it really comes down to the fact that something seems to be stuck in Leopard thinking that the link to the "Video Library" volume is broken or invalid, Smaba sees it as 8 volumes (btw all other shared volumes have only one entry in the Samba view), and everything is confused. The working solution would be to rename the Video Library volume, and connect. Problem is I have over 1,000 movies/tv shows/etc. in iTunes on that drive and if I change the volume name all those links will get screwed up. Any other ideas? I've spotlight searched for video library-# to look for a preference file somewhere that is trying to remember the link, but to no effect. I am sure it has to do with the growing pains associated with the upgrade from Tiger to Leopard and the user IDs, etc. Repair permissions won't work since it's an external drive. Any thoughts?
    Thanks so much in advance.

    Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

  • Can't connect my iPad to my iMac after upgrade!

    I upgraded my iPad Air to the iOS 8.0.2 yesterday, and after I did, I can't connect it to my iMac. When i try, with USB cable, it just jumps between being connected and not being connected.
    I didn't have this problems before the upgrade on my iPad.... Can someone help me please?

    Do you have the latest computer iTunes 11.4?
    If you don't you can download it here below
                                Download iTunes Get the latest version of iTunes for Mac or Windows. Download now                         
    If still no joy,  try troubleshoot below
    iOS: Device not recognised in iTunes
    Mac: http://support.apple.com/kb/TS1591

  • Can't connect canon pixma mg3222

    I download the driver from canon website (I choose the right version-window 8.1 64bit)
    I connect my printer to my computer by USB cable(the USB cable is not broke)
    At first it says printer detected and then some minutes later it says can't found a printer or can't connect to the printer, I'm not quite sure. I just reinstall my OS and now I can't install the driver. It drives me crazy, I try three different computers and none is work
    Please help me, thanks very much.
    Solved!
    Go to Solution.

    Hi slimfit,
    Do you have another USB cable that you can use to connect the printer to your computer?  Also, if you disable any antivirus or firewall software that you have on your computer and then attempt to reinstall the printer, does it install successfully?
    If this is a time-sensitive matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can you connect a pc to an iMac (to move iTunes library)?

    Since nobody answered my detailed request (https://discussions.apple.com/thread/5225308?tstart=60) maybe someone will be able to answer the key question.
    Can you connect a laptop (with an external hard disc attached already) to an iMac, and iMac recognizing both as "hard discs" so that I can move my iTunes library from the external harddisc to the iMac?

    YesEtc wrote:
    ...I need find a way to have the mac see the drive while iTunes is opened with the "X" drive attached and recognized...
    Not on a Mac you don't. OS X doesn't use drive letters and doesn't require them.
    On the PC, go to the iTunes folder (I don't know where it is stored in Windows) and copy all the .itl and .itdb files to the iTunes folder on the external HDD. Connect the external to your Mac. Launch iTunes while holding down the Option key. In the dialog select "choose library" and navigate to the iTunes folder on the external. Select and click OK. This will set up iTunes on the new Mac just like it was on the PC. You'll need to have the external HDD connected and mounted before you launch iTunes so you can listen to the music.

  • How can I connect my MBA 11" 2012  to my Imac 21.5" mid 2010 as a display unit. Connected using a mini display port cable and this did not work. Any guidance welcome. Thanks. John

    I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.

    Welcome to Apple Support Communities
    Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
    You can still use your iMac as an external display, using an application like ScreenRecycler

  • How to Connect Canon ZR80 to my iMac

    Can someone tell me how I would go about connecting my Canon ZR80 digital video camera to my iMac? Is it possible? The digital video camera has a DV terminal. I would really appreciate any help on this as I have lots of video tape to review and hope I can download it to my iMac.
    Can it be connected to any of the ports on the iMac or am I going to have to take this to a camera store and pay them to download these videos onto DVD's?
    Thanks for your help!

    http://store.apple.com/us/product/TU942LL/A

  • Can't connect Canon MP560 wirelessly using Airport Extreme with MacBook Pro

    My Canon MP560 is failing to connect to the access point.  It recognizes the access point/network I would like to connect to but when I enter in my password it fails to connect and tells me to check access point settings.  I used this exact same printer but different router in my old house and everything worked well!  I'm thinking this is a Mac thing that I can't seem to figure out.  I have the lastest Canon driver updates for Mac and use 10.6.8 software on my Macbook Pro.
    This is how the printer instructs me on the panel.
    a. Select Wireless LAN setup
    b. Select Easy Settings
    c. Select Access Point
    d. Enter Password
    e. Fails to connect..........
    Please help.
    Brice.

    Hi Tesserax,
    i have the same issue as mountie30 with the MP560 but it's not working
    i have a airport express.
    i was following your instructions:
    ''To get to this feature within the AirPort Utility, go to the utility's menu bar and first choose Base Station, and then, Add Wireless Clients...''
    the problem is, base station is in light gray and i can't click on it.
    i re-plugged my printer into my imac so it detects it again. (it still says printer offline in settings)
    i have no clue what to do.
    please help
    thanks
    Nath

  • What years apple cinema display can I connect to the new 2012 mac mini?

    I have a 23" Apple Cinema Display that I purchased in 2007. I currently have it connected to m7 2009 Mac Mini. Can I use it with the new 2012 Mac Mini? I am running the latest OS on my 2009 Mac Mini.  I want to upgrade my Mac Mini for more storage a nd the faster processor.

    Yes.  You can connect it to the Mac Mini's HDMI port with the HDMI to DVI adapter that comes with the new Mac Mini, or you can connect it to the Thunderbolt port with a Mini DisplayPort to DVI adapter.
    <http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

Maybe you are looking for