Can't connect error message -3212
can't connect to itunes store, tried to run diagnosis and itunes freezes, went through all the help options, disabled firewall etc. etc. still can't connect since 3/20th. Any ideas would be greatly appreciated!
Welcome to AD!
That error 3212 usually has the same resolution as error 3221:
http://support.apple.com/kb/TS1485
Similar Messages
-
I have tried everything, but for some reason when I open Firefox, I can't access any websites. I can access everything through IE.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Can you start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key?
*https://support.mozilla.org/kb/Safe+Mode -
VPN client can't connect Error message in log is
I_Cookie=E8639EE347B0332A R_Cookie=2E769D3CBD38C09F) reason = DEL_REASON_WE_FAILED_AUTH
What does this mean? How do you fix it?Thomas
I would interpret this to mean that you failed authentication when you attempted to connect. When you attempt to connect do you get a prompt? If not (and I suspect this is the case) it would indicate a problem in setting up the group authentication in the client. If you do get a prompt then it would indicate a problem with the setup of your ID or password in the server or that you have incorrectly entered ID or password.
Be careful that group name is entered correctly (including upper case or lower case matching).
Be careful that passwords are correctly enterred (including upper case or lower case matching and no trailing blanks).
HTH
Rick -
I keep trying to upgrade my iPad using iTunes..The error message "cannot attach to iTunes store...error message (-3212). Suggestions?
I get that problem once in a while and I will not be able to connect to the Internet with any of the 5 or 6 (or 7 or 8 ) web browsers that I use on my iPad. The one thing that I do that has never failed to work for me is to close all apps on my iPad and reset the device. I can't guarantee that it will work for you, but this works for me every time I get the server failed to load/can't connect to the Internet message.... Or whatever the exact message is.
If you have a ton of apps in the multitasking display, it can take a while to close them all, so you could just trey resetting the iPad first and that might be all that you need to do.
Closing apps in iOS 7 works like this. Drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.
Hi!
I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
It allows you to download it offline, which is what I used.
Hope I was help!
-Haroon -
I can log into my iCloud account on my iphone but when I try to log in on my pc I keep getting a connection error message. Any ideas?
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
TS3297 I get an error message "-3212" everytime I try to access iTunes
Why do I get an error message "-3212" everytime I try to access iTunes
Try here > Fix for App Store and Passbook "Can't Connect to iTunes Store" Error - Mac Rumors
Same workaround helped here > https://discussions.apple.com/thread/4309531 -
Receiving error message -3212 cannot access ITunes store
Just reinstalled ITunes after having to reformat my hard drive. Now, I receive the error message -3212 when trying to access the ITunes Store. It says that I don't have an Internet connection. I do, however.
Hi RebeccaBlack,
Thanks for using Apple Support Communities. If you're unable to connect to the iTunes Store even though the internet connection is fine, this article may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari -
Error message 3212 - cannot operate itunes
After months of trouble free use, I downloaded ver 9 itunes. Now I get error message 3212 saying there is a problem with connectivity - remove firewall, or security is blocking connection. I removed all firewalls and disabled all security. On advice from Apple I uninstalled itunes. Reinstalled itunes. No change, I still cannot connect. Took my ipod to work. Downloaded ver 9 itunes there with no problem. Opened itunes ok, downloaded my podcasts (streaming radio) and updated my nano ipod. What gives? Only difference is at work we're using IE ver 7. At home, I had just downloaded IE ver 8. Does anyone have any ideas, because Apple cannot seem to help. Is there a prob with IE8 and itunes? Please help.
Hi RebeccaBlack,
Thanks for using Apple Support Communities. If you're unable to connect to the iTunes Store even though the internet connection is fine, this article may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Cheers,
- Ari -
getting error message (-3212) when trying to connect to i tunes store
Just in case, let's try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
HT204053 I am unable to login to iCloud on my PC laptop. I receive a connection error message.
I m unable to login to iCoud from my PC laptop. I receive a connection error message>
The inability to log into iCloud.com (sporadic problem), use Contacts, Calendar, Notes, etc. (consistent problem), send error reports (consistent problem) from a PC seems to be a common problem; perhaps going back to November/December of last year.
I can only respond based on my findings with Windows 7 (Home Premium and Pro) running on three Dell PCs (2 Desktops and 1 Laptop). It appears that the problem results from an add-on to the 32-bit version of IE9 (Windows default browser). The 64-bit version of IE9, since Windows 7 does not allow it to be the default browser, doesn’t seem to be affected by the problematic add-on and seems to work flawlessly when accessing iCloud.com. It appears that most add-on’s aren’t designed to integrate with the 64-bit version of IE9, only the commonly used 32-bit version.
In my case Norton Internet Security (Browser Protection) was the add-on preventing the 32-bit version of IE9 from working with iCloud.com. Temporarily disabling NIS’s Browser Protection allowed the 32-bit version of IE9 to work fine. Perhaps the browser protection add-on in other security software packages causes the same type problem.
The workaround that I would recommend is downloading and using Apple’s Safari version 5.1.7. to access iCloud.com. It consistently works!!!! To make things easier with Safari, I made iCloud.com its Homepage. I’m using it to access iCloud.com from all of my PCs.
Until Apple, Microsoft, or Norton (in my case) figure out where the problem is, you'll need a workaround to consistently access and use iCloud.com and I think Safari is the best answer. -
How can we trigger error message in BADI PARTNER_UPDATE
Hi All,
I have implemented a BADI PARTNER_UPDATE. In this I have validation ( Error Message ) on saving buisness partner.
It is giving the error message but it freeze all the fields. On pressing enter it goes for short dump.
In short dump it gives error The COMMIT WORK processing must not be interrupted.
Kindly suggest me that how can we pass error message and it also does not freeze the fields.
Regards,
Narendra GoyalHi Narendra,
How are you trying to display message.
Is it using message service class instance of message statement (which should not be used, as that is for GUI messages) or using collect FM or by adding to genil message class container.
Please try different approaches and see what works for you.
Thanks,
Rohit -
How I can fix this error message in the Windows Server - kCGErrorFailure: No workspace dictionary?
How I can fix this error message in the Windows Server - "kCGErrorFailure: No workspace dictionary"? This occurs after every startup or restart.
You probably don't need the hard drive and optical drive specs, but here they are?
======================
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 1.5 Gigabit
Description: AHCI Version 1.20 Supported
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
HL-DT-ST DVD-RW GH41N:
Model: HL-DT-ST DVD-RW GH41N
Revision: PQ06
Serial Number: K3D9BH92251
Native Command Queuing: No
Detachable Drive: No
Power Off: No
Async Notification: Yes
Bay Name: Upper
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Hitachi HDP725050GLA360:
Capacity: 500.11 GB (500,107,862,016 bytes)
Model: Hitachi HDP725050GLA360
Revision: GM4OA5CA
Serial Number: GEA534RJ06E63A
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 1
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk1s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk1s1
Content: EFI
OSXLION:
Capacity: 499.25 GB (499,248,103,424 bytes)
Available: 192.76 GB (192,758,513,664 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /
Content: Apple_HFS
Recovery HD:
Capacity: 650 MB (650,002,432 bytes)
BSD Name: disk1s3
Content: Apple_Boot
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
WDC WD2002FYPS-02W3B0:
Capacity: 2 TB (2,000,398,934,016 bytes)
Model: WDC WD2002FYPS-02W3B0
Revision: 04.01G01
Serial Number: WD-WCAVY7048785
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk3
Rotational Rate: 5400
Medium Type: Rotational
Bay Name: Bay 2
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk3s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk3s1
Content: EFI
BU2TB-Time:
Capacity: 2 TB (2,000,054,960,128 bytes)
Available: 1.1 TB (1,096,926,654,464 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s2
Mount Point: /Volumes/BU2TB-Time
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
WDC WD10EAVS-00D7B1:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10EAVS-00D7B1
Revision: 01.01A01
Serial Number: WD-WCAU43604330
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Rotational
Bay Name: Bay 3
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk0s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk0s1
Content: EFI
Data:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 715.55 GB (715,549,786,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /Volumes/Data
Content: Apple_HFS
Intel ICH10 AHCI:
Vendor: Intel
Product: ICH10 AHCI
Link Speed: 3 Gigabit
Negotiated Link Speed: 3 Gigabit
Description: AHCI Version 1.20 Supported
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS
WDC WD1003FBYX-01Y7B0:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD1003FBYX-01Y7B0
Revision: 01.01V01
Serial Number: WD-WCAW31850957
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk2
Rotational Rate: 7200
Medium Type: Rotational
Bay Name: Bay 4
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
disk2s1:
Capacity: 209.7 MB (209,715,200 bytes)
BSD Name: disk2s1
Content: EFI
BUOSXLION:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 697.88 GB (697,881,690,112 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s2
Mount Point: /Volumes/BUOSXLION
Content: Apple_HFS -
How i can display default error message in alert window
how i can display default error message in alert window
i.e.,
i have a text field with datatype Alpha
if i am giving numbers.etc then it is displaying
FRM-50001: Acceptable characters are a-z,A-z and space
I want to display this message in alert window
please tell how to do thisIn the on-error trigger :
Capture error_code and error_text in a variable.
Set the alert title to something meaningful.
Set the alert message equal to the captured error information.
Display the alert.
declare
v_alert varchar2(100) := 'ERROR' ; -- name of alert to use
v_title varchar2(100) := 'Error !' ; -- text to display as title
v_msg varchar2(200) := error_code || ':' || error_text; -- message to display
v_btn number ; -- button pressed
begin
set_alert_property( v_alert, TITLE, v_title );
set_alert_property( v_alert, ALERT_MESSAGE_TEXT, v_msg );
v_btn := show_alert( v_alert );
end;
---------- -
When I attempt to export/import via FTP for OOTP 11 I get a connectivity error message
I participate in OOTP ver 11 fantasy baseball leagues which uses FTP to export and import league databases. For some reason, I have been unable to import/export using FTP. Each time I attempt to export/import I get a connectivity error message stating "am unable to connect". I have not had this problem with the previous versions of OOTP Fantasy Baseball. Plus, when I first upgraded to OOTP 11, I did not have this problem.
== This happened ==
Every time Firefox opened
== I think it started after a firefox update ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; MS-RTC LM 8; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
Maybe you are looking for
-
My mac does not find my position in maps
Hi. I reasently discovered that my macbook pro and my ipad 2 are unable to find my current location in maps. I have turned on the feature in settings. It works on my iphone. Anyone who can give me some advise?
-
Error while creating Db DataSource - Attempt to operate 'activate' on null
Hi All, I am trying to create a new Datasource for Db Adapter in weblogic - SOA 11g, when i clicked on finish its getting created, but its not getting activated. Below is the error thrown. An error occurred during activation of changes, please see th
-
I am calling a oracle stored function which returns REF CURSOR.. I am using XDP to convert the result set into XML.. But the result coming from my java program is like below.. I don't want to have those bind variables (:B1, :B2 etc) in there, how can
-
Hi All, I am using a VO object. And I want to execute a query something like below to get all the rows. select * from table_users where user_type = '%' Reason: I know select * from table_users will suffice. But, before I execute this query the VO alr
-
Installing Oracle database on SUSE 10 SP 2
hi Previously, I installed oracle database on Ubuntu and OEL 5, now I tried to install it on SUSE 10 SP2. I found that the path recommended for the installation is /opt/oracle while in others (Ubuntu and OEL 5) the was /u01/app/oracle My question is