Can't connect - going crazy!

Hi, I have just spent several hours on this - I have the latest version of PC Suite, a 8800 handset and want to connect via bluetooth.
There are no connection options on the get connected screen and an error message of 'MMLIstEmpty' - I have uninstalled, reinstalled, used PC Suite Cleaner etc etc, without success. I am using XP SP2.
Please help as I have a new handset and want to be able to transfer the contacts etc from my old handset to the new one.
Thanks
Tim

/discussions/board/message?board.id=pcsuite&message.id=3781&query.id=28498#M3781
I assume you have read the above thread ?

Similar Messages

  • Inconsistent WiFi connectivity; going crazy!

    Help! I'm not a savvy technical person and Apple Support and the Genius Bar have not been able to help me, "unable to recreate the problem ". My mid-2011 MBA can connect at the Apple Store and Panera with a transmit rate of over 300. My connection at home and Starbucks is very poor, a transmit rate less than 15 on average. This is a new issue, happening for only the last few months and only my MBA has the issue. My iPhone, PC, iPad, Kindle have no problems. I'm going crazy and can't figure this out on my own. Please help.

    I finally figured out what was the problem. It was coming from my ADSL box which was somehow disturbing the RV with box to box communication.
    I isolated those in a vlan. Since then everything is working fine again.

  • Slow wifi connection - going crazy trying to figure it out. Sadface.

    Howdy,
    I read through the forum and tried to find a solution to this problem but everyone seems to be experiencing differences in what is wrong with their problem and I have yet to find a solution to mind.
    Problem:
    Recently I've noticed my wifi connection has been slow. Slow as in Firefox will sit at "Looking up..." or "Transferring data from..." and just sit there for a few minutes then idle out, stop loading the page or give me an error stating that the server is too busy, or cannot be found. A manual refresh will either restart the process or go immediately to the site. To describe the slowness in another way as if someone is downloading something on the network that causes it to lag. I verified that my computer is not the problem (all downloads offline).
    I've made no changes (except for one, stated below) to my network preferences, my router or anything. I haven't recently installed anything on here that would interfere with my network settings either.
    Failed solutions:
    - Resetting/Restarting my computer, the router and the cable modem.
    - Turning Airport on and off, even switching to a different wireless signal in the house (We have DSL and Cable, don't ask) and I get the same results from both connections.
    - OpenDNS. It solved one problem temporarily (one server seemed to be offline when in reality it was not, OpenDNS let me go there again but the speed issue remains.)
    - Software Update -- Everything is updated.
    Also note that my signal strength is full all the time. It will occasionally dip down but that's nothing as the router is in a room beside mine.
    My Linksys Wireless G with Speedboost router is secured with WPA and the Mac filtering enabled to only allow this laptop, my iPod Touch and my Nintendo DS access. Could this security be compromised and someone jacking my signal?
    I'm at wit's end here. I've usually been able to find my solutions for these problems on a wired Windows computer but this Wifi stuff on my Mac is driving me bonkers. To me everything seems to be green but I know somewhere there is a problem.
    If I did miss an important thread, please point me in the direction of it and I'll remove this topic.
    Here's hoping this thing will post without timing out.
    EDIT Further searching shows me this is a common problem. I guess that's a good thing.
    Message was edited by: psychoboyjack

    Your Mac stores previous DNS Lookups, Ned's suggestion just empties that cache.
    I'm wondering if this could be MTU (Maximum Transmission Unit) related (i.e. packet size) some ISP's can be quite picky about this ...
    Apple have an article on setting it for 10.2 (but not for 10.4) here:
    http://docs.info.apple.com/article.html?artnum=107474
    CockTail also allows you to set this.

  • Can't connect to wifi, goes to IP address page

    Suggestions appreciated,
    Am on vacation & can't connect to the condos wifi, instead, I end  at the 'ip address page' on my iPad2. I have reset network settings, no help. My sister is here too, also using iPad2, and hers connects automatically. We both have version 6.1. Any suggestions are appreciated. I called Apple, and they want $19. to assist me. Not happy:(

    I'm not talking about anything incoming, I'm talking about external.
    My home computer -> external network across the Internet
    I know how to use port mapping and DMX and all that, I know networking.
    I've been trying to debug this for about 3 weeks now and I can't find a single solution.
    It's only going OUT to that IP address that I can't connect, going through the airport extreme.
    outbound withOUT using the router, it works just fine.
    I appreciate any light you can shed on why my airport extreme is blocking my access to this single IP address, it's quite frustrating
    thank you

  • Can't connect to a single external IP address

    I'm having the same problem as this other person is having,
    http://discussions.apple.com/thread.jspa?messageID=7072594
    Basically, I've tried everything and I can't connect to this one IP Address: 206.212.255.34
    I take the router out of the equation and I can connect just fine, connecting directly through my cable modem.
    I know it's not a DNS issue as DNS is not even being used, it's a direct connection to the IP address.
    In the thread above, that person couldn't connect to twitter.com and it was blocked for no apparent reason.
    I can't connect to this IP address for no apparent reason.
    Things I've tried:
    resetting the router completely
    changing the dhcp -> manual and setting the IP and using 255.255.255.0 as a subnet mask
    changing the IPv6 to both alternate modes (it's presently set to link-only)
    setting a DMX for my ip address
    setting a static IP address for my computer
    and I've tried just about everything I can think of, those are just some specifics.
    anyone else having a similar or same issue?

    I'm not talking about anything incoming, I'm talking about external.
    My home computer -> external network across the Internet
    I know how to use port mapping and DMX and all that, I know networking.
    I've been trying to debug this for about 3 weeks now and I can't find a single solution.
    It's only going OUT to that IP address that I can't connect, going through the airport extreme.
    outbound withOUT using the router, it works just fine.
    I appreciate any light you can shed on why my airport extreme is blocking my access to this single IP address, it's quite frustrating
    thank you

  • I have OS version 4.2.1, but can't download paid-for apps because they require OS 4.3. Also, it said in iTunes that my device was already up to date... Am I going crazy, or is there going to be an update?   I don't know what generation of iPot touch I hav

    I have OS version 4.2.1, but can't download paid-for apps because they require OS 4.3. Also, it said in iTunes that my device was already up to date... Am I going crazy, or is there going to be an update?
    I don't know what generation of iPot touch I have. If I am unable to download my paid apps because my iPod is too old, I'm not going to be pleased.
    iPod touch, iOS 4.2

    Sorry, there is no upgrade for your model based on what you've posted. See below:
    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 7.0.x
    iPhone 4S                                    iOS 7.0.x
    iPhone 5                                      iOS 7.0.x
    iPhone 5c                                     iOS 7.0.x
    iPhone 5s                                     iOS 7.0.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 7.0.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 7.0.x
    iPad 3                                          iOS 7.0.x
    iPad 4                                          iOS 7.0.x
    iPad Mini                                      iOS 7.0.x
    iPad Air                                        iOS 7.0.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Fan going crazy every time we run anything  - system very slow. Connected?

    System has slowed down dramatically of late. Now fan is going crazy. Are they connected? Any way to speed things up ?

    You should be comparing it to the size of your hard drive. Look in About this Mac>more info>serial ATA which will give you the drive size. If it's the original, it probably is 160GB, so you have more than enough space.
    Have you emptied the caches and reset the SMU? And vacuumed the air vents?
    You have amazingly little memory. I would add at least 1GB, which you can find at [macsales.com] or [smalldog.com] or [newegg,com]. Make sure that whatever you buy has a lifetime guarantee. I suspect once you add more memory, your troubles will be over.

  • USB CAN 8473 goes crazy

    Hi, guys, my CAN USB8473 goes crazy.
    I use CVI  8.5  to communicate with USB 8473. The software done by using CVI works all right before, when i use another USB 8473.
    However, now, when i just try to initialise the CAN0, i find that the USB CAN is keeping sending CAN frames, then i open the NI-Spy, there is no action observed in spy,which means my soft doesnt give the order to send messages, but the CAN port just keep sending messages(i use a very good scope to get the active can activity). When i call the function to reset the CAN, it stop sending frames, but after i try to send just another frame, it starts  sending frames endless which always goes with ACK error.
    from what could i know if is my hardware problem? I dont want to believe the problem is my hardware, because it is a quite new USB 8473. 
    What is wrong?

    Hi,
    If you send a Frame and there is no receiver connected acknowledging the frame the can controller would transmit the frame over and over again until it becomes acknowledged or the driver closes the handle for the port. 
    The re-transmit ishandled by the can controller onboard automatically and it doesn't require api call, thus it doesn't show up in NI-SPY.
    But you should be able to stop this, by closing the handle.
    DirkW

  • My Finder is going crazy.  Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop.  buttons don't work.

    My Finder is going crazy.  Keep getting a message saying it quit unexpectedly and asking if I want to restore windows, but I can't get it to stop.  buttons don't work.

    Something else you can try.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.finder.plist. Move the .plist to your desktop.
    Restart and test. If it works okay, delete the plist from the desktop. 
    If the same, return the .plist to where you got it from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.

  • When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

    When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
    Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

  • How can i stop icloud from downloading all my photos onto my iphone 4s each time I sync. Then, how do I delete them from my phone, there are no delete options. I'm slowly going crazy.

    How can i stop icloud from downloading all my photos onto my iphone 4s each time I sync. Then, how do I delete them from my phone, there are no delete options. I'm slowly going crazy.

    Hi iprover,
      Let me first say that I am NO EXPERT with anything Apple and really have only started looking into this iCloud stuff a few hours ago because I'm trying to help my mom free up some space on her iCloud. But anyway, here's what I'm learning and what I THINK might be happening to you.
    Also, if any Apple support people (do they browse the forums to dish out helpful hints?) or people who probably know infinitely more than me about this stuff, please do chime in and confirm / correct my statements!
    This is what I gather.
    iCloud for Windows is set up with a local folder (let's call it "C:\Users\Administrator\Pictures\iCloud Photos\My Photo Stream") where iCloud will store photos uploaded to the Photo Stream. This will allow you to view your Photo Stream photos on your PC.
    This does not mean that this is a PC backup of your Photo Stream photos, but just a way to view your Photo Stream from your PC. That being said, the general Photo Stream rules apply: 1. No videos are on the photo-stream, and 2. Photos on the Photo Stream will be removed after ~30 days and/or after hitting the Photo Stream limit of 1000 photos.
    My guess is that the iCloud Windows App will delete photos from the local folder that are older than ~30 days and/or delete all but the most recent 1000 items if the 1000-item limit is reached.
    That is a scary thought! I really hope you did not lose all your pictures, but my guess is that the iCloud local folder is NOT meant for backup but instead is the iCloud Windows App's sandbox for updating and managing Photo Stream photos.
    All that being said, I'd say it's important to back up your photos in a separate folder not related to the iCloud local folder.

  • Why is my wi-fi signal is going strong, but I can't connect to the internet?

    Before I begin, here's my set-up:
    My wi-fi signal (on the top right side of my MacBook) is going strong (with all the bars). And a green light is lit up on my Airport Extreme. For some reason, I still can't connect to the internet/use Apple Mail/use iChat. I don't think that there's anything wrong with my MacBook, as my wife isn't able to connect to the internet with her iPad or with her laptop either.
    I'm thinking that I have the strong wi-fi signal showing up on my computer because it actually is connecting to the Airport Extreme, yet the airport extreme somehow isn't connected to or isn't able to connect to the router. Would this be correct? Any ideas of how I might fix this? I tried unplugging and replugging everything for a few seconds. However, whenever I use a hardwire ethernet connection to my MacBook, my internet and everything works.
    ALSO, of note, I just purchased an Apple Time Capsule. I just realized that it functions as a wi-fi base. Any chance that my computer, my wife's iPad and laptop are just connecting to the Time Capsule instead of the Airport Extreme?
    Any answers would be more than appreciated. Thanks!

    Deselect Proxies if selected.
    Safari > Preferences > Advanced > Proxies:
    Click "Change  Settings" button
    The network preferences window for Proxies will will show up with "Proxies"
    tab selected.
    Under "Select Protocol", uncheck any box if selected.
    Click "OK", then  "Apply"

  • I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on?

    I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on? Thanks for the help.

    Does your Cloud subscription properly show on your account page?
    If you have more than one email, are you sure you are using the correct Adobe ID?
    https://www.adobe.com/account.html for subscriptions on your Adobe page
    If yes
    Some general information for a Cloud subscription
    Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
    Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
    -Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
    -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
    -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
    -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
    If no
    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • TS3297 can't connect to itunes store. getting code "11222". done all the trouble shooting i can think of. been on fone w/ "helpline", but no success. anyone got an idea what is going on here ?

    Can't connect to Itunes store. Keep getting message code"11222". Done all the troubleshooting I can think of . Have researched my network settings and firewall settings. Have followed all the diagnostic routines.  Been on the fone w/ HELP , no success. This code appears to apply to windows . but I can't get past this code. Anyone out there got a clue as to what is going on here ?  thanks
    sambodine

    4 months and 80 views later, not a single response...
    nice to know this support forum works....
    Thanks (for nothing) apple....
    and BTW, please continue ignoring this topic, cause i really dont give a **** about "genius" any more...

  • I have trying for days to download Firefox 4.1. It goes through all the motions, but when it gets to the final step, it can't connect with the download server. What should I do? It keeps telling me this download is strongly recommended.

    It downloads everything, but when I re-start, it can not connect to the download server.
    I've left it open and it never connects.

    Your UserAgent indicates that you used Firefox 3.6.17 to post here. <br />
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-GB; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17
    What does it say about the version of Firefox you have in '''Help > About Firefox'''?
    If it says Firefox 4.0 or 4.0.1, see if this helps you: <br />
    https://support.mozilla.com/en-US/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser

Maybe you are looking for

  • What to do with a broken Bluetooth keyboard?

    I have an Apple Bluetooth keyboard with non-working keys: Tab, Caps Lock, left Shift, Q, W, E, R, and T. All the others work fine, and I can successfully pair it with my PowerBook. I took it apart to investigate and confirmed what I had suspected: So

  • Explain about transparent mode, single mode, multiple context mode

    You can explain about the differents of transparent mode, single mode, multiple context mode in ASA 5500? Thank you very much.

  • Bytes paged out Logical standby (urgent!!!!!)

    Hi, We are having  a 3 node  LOGICAL STANDBY RAC ,it is continuoulsly  paging out bytes to disk. SQl > select from v$logstdby_stats;* NAME     VALUE number of preparers     2 number of appliers     27 maximum SGA for LCR cache     3072 parallel serve

  • The most bizarre ipod ever

    ok - i have had my ipod since june of 2004. it is a thrid generation. the battery is fine and still is, so this is not a battery issue. here are the symptoms: - the ipod does not read when plugged in through a firewire, though it does when a usb conn

  • Spatial Data and XML metadata

    My project involves storing various types of spatial data in Oracle 8i. There is also going to be metadata collected for each project. The purpose of the metadata will be for discovery and retrieval of the spatial data. I would like to store the meta