Can't connect HP PSC 2510 Photosmart Wirelessly

I've had my iMac for almost 2 years and have purchased 2 (soon to be 3) laptops for my family. I've never been able to get my wireless printer to work without hardwiring. How do I set this up? Is the printer too old?

if you hook the printer up to a wireless access point then it should work fine. I don't know how HP has the wireless sharing set up on the printer so that would be something to look at.
Also the printer should be seen in bonjour if it is wireless.
Message was edited by: a Mac user

Similar Messages

  • After upgrading to mavericks how can I connect my HP PSC 2510 photosmart all-in-one printer to my mac?

    After I upgraded my macbook air to mavericks, my HP PSC 2510 photosmart all-in-one printer doesn't connect to my macbook air.  When I try to launch the all-in-one installer from the HP CD that came with the printer, I get a message saying it cannot open because powerPC is not supported.  The HP site has not been helpful in resolving this issue.  My understanding is I first must connect the printer to the wireless system (I use airport extreme) before using airplay for printer software upgrade.

    Your suggestion is helpful, but after some digging on the HP site I found a detailed solution to my problem.  The link is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01749025&tmp_task=setupCate gory&cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r0001&lc=en&product=303770

  • How can I connect my iPad to my wireless Hp  Officejet Pro 8500 A909g ?

    How can I connect my iPad to my wireless Hp Officejet 8500 A909g ?

    Are you trying to connect the iPad directly to the HP or using your wifi network?
    HP published this page that may help:
    http://www8.hp.com/us/en/ads/mobility/overview.html?jumpid=va_r11400_eprint
    A909 does not show as an AirPrint capable printer:
    http://support.hp.com/us-en/document/c02623193
    About AirPrint - Apple Support
    You may wish to search the AppStore for an app that could help you.

  • HELP! Can't connect on 2 or more wireless connection

    I have WRT110 Linksys wireless router. I also have the latest firmware. fw 1.0.04. I have no problems connecting wired connections(2 PCs) and 1 wireless connection. However, when i tried connecting 2 or more wireless connections(3 laptops). All computers gets disconnected. I need to turn off the router again and my computers to get connected but only 2 PCs and 1 wireless laptop... Any help please! I already talked to tech support and no help! We tried to power cycle, reset for 30 secs, remove adapter, cables, etc. and didn't help! Same results! Can't connect on 2 or more wireless connections. We edited the basic wireless setting to WEP/WPA personal, band, channels, still no luck too! Im getting frustrated with this router. PLEASE HELP! I have Time Warner Road Runner cable internet. Thanks in advance!
    Message Edited by rhenzhen on 10-02-2008 05:18 AM

    Try these settings  on Advanced Wireless
    settings>>Change the Beacon Interval to 75 >>Change the Fragmentation
    Threshold to 2304 Change the RTS Threshold to 2304. and Upload the same firmware on the router once again. 

  • How can i connect iphone 5 with izon wireless camera?

    Hi
    How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
    What is wrong??????????

    I would check if they have some info here
    http://steminnovation.com/support
    and then I would test it with other phones or a computer to verify that it's not broken

  • Can't connect PB G4 to linksys wireless router when 64bit is established

    Hello-
    I have my PB G4 connected (wirelessly) to a linksys wireless router WRTP54G. If I don't have security set on the router, the PB connects. Once I add the security (64bit) and enter the password, the message "There was an error joining the AirPort network” comes up and I can’t connect. I've connected my other laptop to the network (a PC).
    Any ideas on how to fix this? Thank you in advance.

    Does your router support any other form of encryption? See if this KB article makes any sense to you.
    AirPort: Joining an encrypted wireless network
    Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
    Yang

  • Can I connect a Macbook to a wireless network for PCs?

    I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

    The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
    The solution is to plug directly to the router with an ethernet cable and it always works.
    The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
    So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

  • Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

    Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

    Hello gilldenc
    To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
    Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
    When a solution is found please mark the post that solves your issue.

  • Can't Connect to Linksys Admin over wireless connection

    I just purchased a LinkSys WRT54GX2. Setting up the wireless network with my DSL modem was a breeze. However, I have one problem. I am only able to connect to the router admin from the computer that is connected by cable. My laptop can access the admin if connected by cable. However, when I have it connected wirelessly, it can't connect. Is there a particular setting I have forgotten?

    They only recommend doing settings wired. Now, I have usually been able to do whatever I wanted wireless, but I consider that a bonus.

  • Satellite C655D-S5533 can't connect to internet through ethernet (wireless connection ok)

    I can't get an ethernet connection thru my ISP's (Comcast) internet cable box.  I clicked the LAN icon on control panel but still can't connect.

    First, reboot the Comcast box and then reboot the computer.  If it still doesn't work, look in Device Manager under Network Adapters. If the LAN adapter shown there is Atheros, reinstall using THIS driver.  If it says something else, post back.  I'm assuming you are still using Windows 7 64 bit that came with the machine.
    C.B.
    Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

  • Psc 2510 photosmart

    I just hooked up the psc 2510 printer to a Mac X (version 10.9.4) and although the Mac  indicates the document is being downloaded to the printer, the download indicator shows the process as ongoing and it doesn't appear to complete the download process. The printer is totally unresponsive.

    Hello oiwin and welcome to the HP forums!
    I'm sorry to hear you've been having issues getting your PSC 2510 to print with your 10.9 Mac, but I will certainly do my best to lend a helping hand and hopefully get things working for you
    I will suggest that you start with (don't re-add the printer just yet) and then perform a verify/repair of disk permissions. When that completes, please restart your Mac and make sure to download and install this HP Printer Drivers v.2.16.1 for OS X from Apple's website. Once that is done, please proceed to re-add the printer and try printing again.
    Hope that does the trick, let me know
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How can i connect Ipad2 to a LCD wirelessly?

    Hey! I want to connect an Ipad2 to an LCD.....i know i have to use the AV Apple cable to send it via HDMI....my question is...can i use wireless HDMI to mirror it on the LCD?

    How about telling us what camera and what iMac you have?

  • Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

    Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
    Been to my parents with the i pad and this will connect to their wireless router.
    Can not think of anything else to try

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
     Cheers, Tom

  • Can't connect to wired host from wireless hosts.

    I have a Linux server connected via Gig-E to my new Airport Extreme. My iMac that is connected via Gig-E can connect to the Linux server just fine, however, my iMac on wireless and my PC on wireless can't. The wireless clients cannot even ping the Linux server. (They can ping the wired iMac just fine).
    I suspect this is a Linux problem, but if anyone knows of a fix here, I'd appreciate it.
    Thanks
    Steve

    It looks like there is a problem between the built-in Gig-E Linux driver (forcedeth.c v.60) for the AMD nForce motherboard that I am using and the Airport Express. Installing an Intel 1000/Pro series PCI-E card into my Linux server solved the problem. Another workaround was connecting the nForce ethernet to a slower speed switch and connecting the switch to the Airport.
    I'm inclined to believe that this a problem with Linux.

  • Can't connect Airport Express to existing wireless network!

    I just got my new A Express. i try to wirelessly join an my existing network but when it restarts it doesn't see the device. It's i'm trying to set it up so that I can use it as a wireless printer connection for my two macbooks, but all i end up with is the flashing amber light. I've tried a hard reset and that's clearly not solving the problem.
    i'd welcome some help as well.

    for some reason i had a problem with my airport in my laptop and it couldnt find networks that are hidden.. so that might be the problem the encryption.

Maybe you are looking for

  • How do I transfer Lightroom 4 license from one computer to another?

    Hi Adobe Community, Recently I have purchased a new Windows laptop to replace an older one; in my attempt to transition all files and programs to the new one I found some difficulty in the transferring of lightroom 4. I know that in order to transfer

  • Upgrade to 10.6.6 ruins DVD drive - THANK YOU, APPLE!!!!!

    Funny, since the upgrade from 10.6.5. to 10.6.6. I too have problems with a formerly more or less perfect system. I cannot read or write CD-RWs anymore and I've just discovered a data DVD which the MacMini will not read. This was NOT the case before

  • What/Where is the 32-bit version of Windows System Image Manager?

    I'm running into the problem described as follows in the WAIK documentation:  "Windows SIM fails to create a catalog for a 32-bit Windows image from a 64-bit version of Windows SIM. To workaround this issue, use the 32-bit version of Windows SIM to c

  • I'm having trouble importing photos to my Ipad2

    I followed all the instructions, attached the iPad, selected the device and hit "photos," then selected a folder (73 photos) from my PC.  Now my iTunes says it's syncing to the Ipad but it also says (unendingly) "Accessing iTunes Store."  Is this wha

  • 3D axis not visible in CS5 extended - why?

    Just recently upgraded from cs4 to cs5 extended. Have read all the advice re View>show3d guide and turning on open GL but still no sign of the 3d axis, can you help me please?