Can't connect HP Touchpad to internet/network

I have many issues with my HP TouchPad. I will only mention the MAIN ISSUE, I CANNOT CONNECT TO THE INTERNET through my network!  I can connect to my network with my ipad2, my iphone4, my Sony VIO, my DELL Laptop, my HP wireless printer.  But I cannot connect with my HP TouchPad.  Correction, I can get to the network, but not the Internet.  I've talked to HP service 3 or 4 times.  They say it must be my router... It is not my router... I am a CIO so I took this so called tablet to my Network Engineers and all three of them cound not get it to work on 3 differnt networks... yes you got it all three networks work well with any other device... HP support says it must be all 3 routers!!! REALLY, REALLY,  interesting... I've mention MTU's and other things to them, like a new driver.  Not sure if they understand ENGLISH! Anyhow, if anyone would like to buy my HP TouchPad for $300 PLEASE let me know as it was not worth what I paid for it! I would still take a loss of $300, but than I can get back to my other devices that we are testing for our 150+ mobile users! Yes, my iPad2 works GREAT!!!
Add Tag...
Use commas between Tags

Have you tried the simplest of router troubleshooting?  Cycle power to the router?
The TouchPad I have works fine with every Wifi source I've pointed it to - home system, and many HotSpots.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

    I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously.  My old AE allowed this but can't make the new one work that way. 

    In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
    WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
    What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
    I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
    For Macs:
    o MacStumbler
    o iStumbler, or
    For PCs:
    o NetStumbler

  • HT1695 How can I connect my MacBook to Internet over cellular network

    How can I connect my MacBook to Internet over cellular network?

    Read here:
    http://support.apple.com/kb/ht4517

  • Can printer connect to more than one network?

    Hello.
    I just bought the wireless HP deskjet 3050 printer. I've connected it to the internet (network) and it's working perfectly. Is it possible to connect to more than one network? We have more than one internet line in the house so I was wondering if I can set it up for both lines. I understand that I can print with multiple computers on the same network (and I am able to do so), but how about on different networks?
    Thanks.

    No, it only has one network connection device so can only connect to one at time, sorry.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I can't update my ipod. When I check for updates it says "can't connect to server"(despite internet connection being fine). Also, when I try and update software it starts then stops after 2 seconds

    I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - For one user uninstalling/reinstalling iTunes resolved the problem
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Can't connect wirelessly to the Internet

    Hi all,
    hope someone can help me with this.
    I'm running OSX 10.3.9, have an ADSL Nation X-Modem and AirPort Express.
    My wireless network is up and running, I have strong signal and AirTunes can connect and play fine wirelessly.
    However, when I try to open Safari and connect to the Internet, it doesn't connect ("Can't find Server.")
    When I plug the X-Modem direct into the Mac with the Ethernet cable, I can connect to the internet fine, so the modem and cable don't seem to be the problem. I've tried running throgh the AirPort Express SetUp Assistant and restarted AirPort and rebooted everything many times. In Network Preferences, it says it's happily connected, has IP address etc, but I still can't connect wirelessly to the Internet?
    Any help greatly appreciated!
    thanks
    Nat

    OK, here it is again
    First you plug the Ethernet cable from your Internet modem into the AE. Then plug it in. The light will go amber. Run the Airport Setup Assistant. Create a new wireless network. Call it what you want. Enter the information about your modem, in the fields just like you do for your Ethernet connection on your PC or Mac. This means DHCP or static IP and subnet..... most if you use DHCP will be filled in for you. Now that you have saved the info and the AE has restarted, look for the network that you named in the available networks. If you have set it up to dish out IP addresses, it will give you one. If you have started out with WEP or WPA the connection process is much more difficult at first.
    I leave it wide open until I can connect to it and then I create MAC access lists. I'll leave all the security stuff to you after you get it working basically.
    Run Airport Admin Utility. It will scan the area for AEs and AEBSs and you can select yours from the list. Click on configure. Here is where you set all the details up on how you want it to work. Here you can configure the details, place your securities etc. Notice that you are accessing it wireless and then you can go through the various Tabs to configure how you want it to operate.
    There is an Internet tab. This will show you how it is configured. It should look the same as your NIC parameters did when you hooked straight to the modem. There are also many more tabs that allow you to configure each area, like do you want it to be the gateway of your network, dish out IP addresses etc. My advice is to let it do that if more than one machine will connect and you don't require defined addresses to get to say a server.
    The two important areas are the Internet and the LAN area. These tell it how to interact with your modem, and the machines trying to connect to it. If the AE doesn't see the modem or can't interact with it, one of the parameters is wrong. Same goes for the LAN side of things.
    Michael

  • Can't connect macbook pro to internet with airport extreme

    Can't connect macbook pro to internet with airport extreme

    If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
    Tell me how the Airport is setup.. what broadband modem and router you have.
    What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
    Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
    Upgrade to Yosemite??

  • HT4199 Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller

  • How can i connect the mac with internet key?

    how can i connect the mac with internet key?
    I try but it tolds me that I haven't the javaruntime...

    I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

  • Can't connect to my home WiFi network

    I'm using a linksys router and using WEP security. The iphone can see my network, but when I enter the password it tells me I can't connect. I can't seem to make the phone forget the network so that I can start over.
    Any help would be appreciated

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

    I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

    It may be your router is to old. Good read:
    http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html

  • Can't connect to FaceTime, check your network connection try again

    Can't connect to FaceTime, check your network connection an try again keeps coming up when logging in

    1. Make sure software is up to date
    2. Make sure FaceTime is enabled; Settings>FaceTime
    3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
    4. Make sure Push Notification is enabled
    5. Make sure phone number or email address is correct
    6. Hold the Sleep and Home button down (together) until you see the Apple Logo

  • Can't connect to any secure WiFi network. Help...!

    Hello,
    I am unable to connect to any secure wifi network. Using iPhone 5, Model : MD300B/A, Software : 6.1.4 (10B350). Whenever I try to connect to any secure wifi network, it says password incorrect. But it connects fine with unsecured networks. Double checked the same secure networks with my iPad and it works fine. Tried reseting the network settings and all settings. Updated to latest firmware (6.1.4). Still not working.
    Please help.
    Regards,
    Madhavan

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • Can't connect to router on different network ssh or http

    Hello,
    I set up my router with one interface on my trusted network. I set it up on this network temporarily just for seting it up using interface 0/0. I then configured the other IP on my to-be DMZ giving interface 0/1 a IP address. (I don't have my public IP address, but when I get it 0/0 will be the internet facing port). I plug in 0/1 into my DMZ and left 0/0 plugged into my trusted network. (I am using a Firebox between the DMZ and trusted network).
    I can ping both my 0/1 and 0/0 interfaces, I can conncet via http and ssh to my 0/0 IP, but I can not connect to my 0/1 IP with http (times out) or ssh (nothing on screen).
    Can any one help me out with connecting for management to my other interface on my to-be DMZ subnet?
    Thanks,
    Ken                  

    Impossible to say without seeing complete topology and configurations.

  • Ios7 can't connect to wifi ad-hoc network

    Hi,
    I have a problem connecting my iPhone 4S to the ad-hoc wifi connection my macbook creates when "sharing" the ethernet internet connection through wifi, with iOS6 it worked flawlessy. I have no problems connecting in wifi to my router though.
    Anyone experienced that? Could you try?
    Thank you

    For what it's worth, I contacted the support team at Avatron (the developer of Air Display) and asked whether they had any workarounds. Here's what they came up with:
    Thanks for contacting us at Avatron support about the issues that you've been seeing when connecting via an ad hoc network. I was unaware of this problem but after doing some testing this morning it seems to happen with one of our iOS 7 iPad 2s as well.
    While this definitely seems like something that Apple needs to address, I was able to get Air Display working over the ad-hoc network if I disabled internet sharing from the Mac System Preferences > Sharing pane. Obviously the drawback of this is that the iPad will no longer be connected to the internet when you are using Air Display in this manner.
    Please let me know if this is able to serve as a temporary workaround while Apple investigates the problem.
    Cheers,
    Aaron
    Technical Support
    Avatron Software, Inc.
    Clearly this is not a full fix as I can't access the internet when connected to my ad-hoc network, but at least I got Air Display running.
    Their reply also suggests that this isn't a blanket issue covering all devices running iOS7, as only "one of [their] iOS 7 iPad 2s" was having the same problem.

Maybe you are looking for