Can't connect internet wirelessly with OSX 10.5.6

My G4 connected internet wirelessly with OSX 10.3.9. After I loaded OSX 10.5.6 my computer does not recognize nor connect wirelessly with my home network. It connects fine with ethernet. Please help.

I found the trouble was my base modem. My DSL carrier had to upgrade the software on the modem. This solved the problem.

Similar Messages

  • Can no longer connect to internet wirelessly with Linksys WRT54G...

    Hi, all...
    I'm at my father-in-law's house. His home network setup is as follows:
    * Compaq desktop connected via Ethernet cable to
    * Linksys WRT54G, v3 (IP 192.168.2.1) connected via Ethernet cable to
    * Westell DSL modem provided by SouthEast Telephone (his ISP - IP 192.168.1.1)
    I set this equipment up for him about 18 months ago. His Compaq desktop connects perfectly to the internet, using the setup I described above, which I set up for him about 18 months ago. I *used* to be able to connect to the internet wirelessly (with both my IBM ThinkPad and my MacBook; my bro-in-law *used* to be able to connect to the internet wireless (with his Dell laptop).
    For reasons we don't yet understand, neither of us can connect wirelessly to the internet any longer. I have called Linksys, posted to their board, and read other threads here, so I am aware that MacBooks have some issues with Linksys routers. I'm getting ready to phone my father-in-law's ISP, to see if they can help.
    But... I don't understand why this used to work, but doesn't any longer. I would be very grateful for any help any of you great folks could provide, and I will gladly post here any detailed info on the setup that might be of help!
    Many thanks,
    Bill J.
    MacBook 2.0   Mac OS X (10.4.8)   iMac 17in Core 2 Duo 2.0, AirPort Extreme, AirPort Express, IBM NetVista M42

    Thanks for your reply.
    Actually the Linksys 2Wire modem works fine in OSX and when connecting via a Compaq PC I also have in the house. It is just on the MacBook running XP that it fails to "connect". XP see's the network but cannot connect.
    Also, I downloaded again bootcamp and created a fresh driver CD, reinstalled the driver and received the same error: 1706 No valid source could be found for product Macintoish Drivers foir Windows XP.msi.
    I looked at the directory on the CD and it appears that there are no driver files, only documentation.
    I called Apple, got no help, called Microsoft, spent 1.5 hours talking to them
    they were no help either.
    I sent a messge to the bootcamp beta mail address informing them that it seems the drivers are not being downloaded with bootcamp.
    Thx again.

  • Issue in connecting to the internet wireless with my Linksys

    OK. Here's the deal. I am entirely frustrated and also over my head trying to solve this on my own as I have no idea what I'm doing.
    I have a Mac Powerbook, OS X (3.9). I have always connected to the internet wirelessly through my Linksys router (Wireless B Access Point, Model Wap 11).
    I have recently moved and now use Comcast for my internet. When they installed my internet, I had not yet unpacked my wireless router, so I was set up to be connected via the actual cable plugged in. Now that the router is all set up, I cannot for the life of me get my wireless to work. Currently, I can use the internet wirelessly in other homes/school no problem. In those cases, I don't do anything, I just turn on my computer and it connects automatically. But for some reason in my apartment I cannot make it work.
    I *think* the problem lies somewhere in the IP address area? If I look at my Airport settings and go to the TCP/IP tab, there is no information contained on the screen. Meaning, in the area where it says IP Address, Subnet Mask and Router, there is NO data listed, just gray empty space. The same goes for the DNS Servers and Search Domains areas, but at least in that case there is a white box to input text.
    I can choose the "Configure IPv4 Using DHCP Manually" and that will let me input numbers, but I have no idea if I should even be playing around with this.
    Also, perplexing me even more, is the fact that I can choose my Linksys internet connection through the Airport screen, and when I have selected it, I show full bars. But I can't actually connect.
    Silly me, I attempted to call Comcast for help with the issue, but they say that as long as I can connect to the internet in any way (plugged in) then they do not care that I can't connect wirelessly.
    I miss checking my email in bed...someone please help!!!
    Thanks a million in advance for any and all help.
    -kt

    Are u talking about routers username , password? Well there is one routers username ,password (default is "admin") and the other is your cable ISP username , password (on the routers webpage). I am talking about the latter. If nothing works, try resetting your router ... You will have to configure it again (doesnt take much time if you know it).

  • How can i connect a Wireless Keyboard and a Trust mouse with a brand new Mac mini?

    How can i connect a Wireless Keyboard and a Trust mouse to a brand new Mac mini?

    Go to the Bluetooth icon on the menu bar and select "Set Up Bluetooth Device". Follow the wizard.
    Alternatively, if you haven't yet unboxed and setup the Mini, you can pair the keyboard to the Mini (and possibly the mouse). However, I would set up with a USB keyboard and mouse and pair the Bluetooth devices afterwards.

  • How can i connect the mac with internet key?

    how can i connect the mac with internet key?
    I try but it tolds me that I haven't the javaruntime...

    I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

  • I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station??

    I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station so that I can use my iPad?
    THanks for your help!

    for #1
    Frequently asked questions about Apple ID - Apple Support
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    for #2
    Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

  • How can i connect iphone 5 with izon wireless camera?

    Hi
    How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
    What is wrong??????????

    I would check if they have some info here
    http://steminnovation.com/support
    and then I would test it with other phones or a computer to verify that it's not broken

  • Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Can one also print wirelessly with an old HP C6280 printer?

    Can I set up multiple usb hard drives- one for time machine and a second for media?
    Yes.
    Can one also print wirelessly with an old HP C6280 printer?
    Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

  • Can't connect to wifi with my iPad

    can't connect to wifi with my iPad

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • HT4972 can't connect to network with linksys e2500

    Can't connect to network with linksys E2500. Can anyone help me?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • TS1398 Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

    Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

    When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
    Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
    o Connection Type: Infrastructure
    o Wireless Security Type:
    AirPort Setting = PC Setting
    o WEP = WEP
    o WPA Personal = WPA-PSK w/TKIP
    o WPA2 Personal = WPA-PSK w/AES

  • Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

    Can you not sync wirelessly with a desktop PC on a wired network, while your iPhone is on the network wirelessly??

    I also thought that this was the case, but that is incorrect.  Please see my previous post below:
    I was having the same problem with an iPhone 4 and Windows XP.  I finally fixed the issue! I read several posts over the past month telling me to make sure that both the PC and iPhone were on the same network.  I thought that both were on the same network; however, I was using my "Guest network" to connect my iPhone to my Airport Base Station.  In order for both devices to be on the same network, the first 3 numbers of both IP addresses must match.  For example, if the PC's IP address is 199.167.1.X, the iPhone's IP address must be 199.167.1.Y.   I signed onto my password-protected network from the phone just to see what IP address it would use.  As soon as I logged on, my iPhone started to sync wirelessly.  I don't know if this will work for anyone else, but I would suggest comparing the IP addresses of your PC and iPhone before doing anything else.  For those posting that the PC and iPhone must be on the same Wireless network, my PC is hard-wired to the Airport Extreme and it still works!
    My Setup:
    iPhone 4 (running IOS 5.0.1)
    Dell PC (running Windows XP SP3) (no wireless network card)
    Airport Exteme Base Station (5th Generation & updated firmware)

  • I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?

    I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
    Thank you.

    The Holy Mecha of Wifi
    Turn router off then on Try turning your wireless router off then back on.
    Change or turn off wireless security You may want to try toggling the settings on your wireless router, switching from WPA to WEP or vice versa, or, as a last resort, turning wireless security off altogether. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
    Reset network settings on iPad. On your iPad, open Settings, then navigate to “General” in the left-hand pane. Scroll down and tap Reset, then select “Reset Network Settings.” This will delete any stored WiFi passwords and other information, but may result in a more stable connection.
    Adjust brightness upward. Oddly, a number of users have found that they can resolve this issue by simply adjusting the iPad’s brightness level upward and off the lowest setting. To do this, tap Settings, then select “Brightness & Wallpaper” from the left-hand pane. Slide the brightness bar upward, then wait 1-2 minutes and check for an improvement in signal strength. Speculation holds that a power delivery issue associated with the screen brightness affects Wi-Fi.
    Change thresholds in router settings. Access your routers configuration screen (for most routers, open a browser and enter the address 192.168.1.1), then change the fragmentation threshold and the CTS/RTS threshold as described here. Some users have found success with the settings Fragmentation= 2048, RTS = 512.
    Change 802.11 spec on router. Try changing your router’s wireless spec mode from B, G and N to G only or vice versa. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
    Switch routers. Although a far-from-ideal solution, some users have found success with switching to a different wireless router.
    Turn off “Ask to Join Networks.” To do so, tap Settings on your iPad, then select “Wi-Fi” from the left-hand pane. Slide “Ask to Join Networks” to off. Speculation holds that leaving this option on causes the iPad to constantly seek networks, resulting in some type of interference with the network to which it is connected.
    Forget network then rejoin. Tap Settings on your iPad, then select Wi-Fi from the left-hand pane. Choose the network with which you are experiencing difficulty, then select “Forget this network.” Go back to the previous screen and rejoin the network.
    Turn off Bluetooth. Some users report that, perhaps due to interference issues, turning off Bluetooth can boost Wi-Fi signal strength. To do so, tap Settings then tap General in the left-hand pane. Tap Bluetooth in the right-hand pane, then slide to off.

  • Can not connect my wireless printer to the new router.

    Can not connect my wireless printer to the new router.

    Can you please provide details:
    1.  The make and model of printer
    2.  Make and Model of Wireless Router
    3.  Is your printer connection wireless to router or a cable to PC
    4.  What have you done or attempted to do to establish a connection?
    5.  Any further info to assist

  • Can I connect two macs with thunder bolt ?

    can i connect two macs with thunderbolt like I do with firewire and IP? I don't want to transfer files by using the control "T" at startup . I want use VNC to control one mac from the other and use thunderbolt vs ethernet.
    thanks for any help

    You can connect the two.  Whether you can use VNC, I have no idea.
    http://store.apple.com/us/product/MC913ZM/A
    Ciao.

Maybe you are looking for