Can't connect JAI CV-M1 camera to PCI-1409. Error: 'Can't lock on video source'

I am connecting a JAI CV-M1 camera to a PCI 1409 card but I can't kill the error message 'can't lock on video source'. Does anybody has the right interface and camera files for me (*.iid and *.icd)? Thanks...

Hi, I had a customer that used that camera , the configuration files are available in NI site , but you need to connect NOT only the BNC but in addition you need to connect PCLOCK pin because Pixel Clock is not standard.

Similar Messages

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!

ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!

HI,
Your specs say OS X 10.6.8 which would be iChat 5.x.x in Snow Leopard.
This version by default tries to login in to the AIM server called login.oscar.aol.com on port 5190 using the TCP protocol.
An internet connection is made up of 65535 of these so called ports (more like TV stations)
Most routers have ports up to port 1024 which means some of the iChat Login Ports are above this.
Two ways to Solve this.
1) Change the Login port iChat uses
2) Change the way the router opens ports.
For 1) go to iChat Menu > Preferences > Accounts
Highlight/select the AIM account.
In the Info Tab deselect the "Enable this Account" to make sure you are Logged out.
In the Server Settings change the Port to 443
You can decide not to use SSL as well if you wish (the server name automatically loses the leading "s")
For 2) log in to the routers set up pages and make sure it is doing UPnP
This allows the computers to tell the router which ports to open. It also allows multiple devices to use the same ports.
For iChat this allows it to Screen Share as this happens on an unlisted random port.
Opps forgot a couple of things.
If you are using an APple ID registed at Apple ending in @mac.com @me.com or @iCloud.com then the passowrd at Apple has to be 16 characters or less to work with the AIM servers.
Additionally the iCloud issued @me.com and @iCloud.com one require you to use iChat 6 in Lion or Messages in Mountian Lion due to changes Apple made to the security of letting AIM "read" the passwords.
9:38 PM Sunday; June 9, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?

Can only connect to Linksys E4200 when very close but PCs can connect at 50 feet. What's the solution?

If you're technically comfortable in getting to your Linksys settings - try changing the network mode or channel in your router's settings.
I still use my old Linksys router and when it's set to the default channel, which is 7, my Macbook Pro and Macbook Air sometimes have issues - changed the channel to 9 and have had no issues since.
Maybe it might work for you.
In any event - screenshots below are for your E4200 and play with those settings and see if any of the changes you've made improves how your Macbook connects. Before you change any settings, just remember what the old settings are in case you need to go back to your old settings.
Good luck.

Hi,how can i connect a bird box camera to cq61?

Hi,
in trying to connect a bird box camera to my Presario CQ61.It is supplied with the bayonet red/white leads and a scart to tv.I cannot find an adaptor for these-Help!
Thank-You

Just guessing, but Windows wont see it unless you have a driver/interface that makes it appear to windows as a video device.

Can't Connect to one person any more even though we can connect to others

I'm hoping that someone has an idea of what i can do to remedy this situation.
I have been video ichating w/ my wife from work for many months. (she does work for my office from home, so it's ok) She has a MacBook Pro and I have a MacBook. Things worked great until about three or four weeks ago. Now we cannot connect w/ video OR audio at all. I can connect w/ anybody else on my list from work and she can connect w/ anybody else on her list from home. But when we try to connect w/ each other, we get the error -22 bandwidth problem.
How is it possible that it is only our direct connection that does not have enough bandwidth when we can use our same connections to video chat w/ others??
We are both current w/ updates on all of our software.
HELP!
MacBook 2GHz Intel Core Duo Mac OS X (10.4.8) 2 GB Ram

I give up,
There are so many routers, osx, macs and settings that it is difficult to find a repeatable bug.
It just feels like that there are three factors that cause connection problems.
And then different combinations when you look backwards.
So what I have to say is that I cannot pin it down or remotely claim I have firm reason to believe what I say is right but I do see some "combinations of plausible suspects causing the same error message"
The first Macbook Pro was a hard one, refined, improved etc but a non connector.
And it was very hot, uncomfortable hot. I think the designers had been a little to enthusiastic speeding up the processor time.
Now the heat wouldn't be a real problem, the amount of calculations within a very short time might have caused the probook to
be the king of not connecting. There was a certain issue with a card that time so not impossible. Another variable caught the eye.
The graveyard of routers. Understandable, you hide your router and hope you never have to see it again. They do age though, fast.
Updates and firmware did bring some relieve but the Apple chips are something completely different then when tests showed all was good with your good old router. Yet my G4's did respond and my G5 did not. Something totally different caused the error but it gave the same error tekst. it was me who managed to give my computers the exact same identity. Well the error message was: "user does not respond" and I was convinced that it was some kind of bug causing the universal iChat "does not respond" mistery. The port-forwarding was the only fair chance for connecting, and with endless patience and effort Ralph and a lot of others almost personally fixed every possible router combination sold by Apple. The design and coding assignment however was complete the opposite, plug 'n play. Somehow our neighbor was iChatting just by pointing at his router and we did not respond.
In the beginning the specs looked good, it worked fantastic when you managed to avoid to get one or two "show stoppers" in your setup.
A lot of bandwidth, the right sort of router for your specific setup (os version, router software and maybe the right camera and much more)
It is a miracle that some of us got it right the first time. It ran flawlessly if you had the right combination of settings, hardware and software.
And oh boy, what a pain if you got them all wrong. I've been busy at night so to say.
But there is hope, I've seen Macs go online right out of the box (10.4.8) and it looks promising. They all went full motion video chat with no change to settings or any other effort then clicking on your language etc. Splendid. I dare to say that you need to put an effort in it to get it wrong.
The new 802.11n routers that are leaving the shops are fast and steady, 10.4.9 is ready, and in the distance there is a cat waiting that is awesome. I think I already know which airport/router/musicstore/videoshop I'm going to buy.
Just hope Apple doesn't forget to sync the time with MS, it could take a while to debug.
Regards,
JP
Some tips if you can't wait to chat:
1st, it makes no real difference who your ISP is in this case as your issue is not ISP related.
2nd, whether your computer is named or not in the file sharing prefpane should have no bearing on how well your computer hooks back up to the wireless network following sleep.
3rd, PPPoE is not a setting for your wireless network and shouldn't be a setting for any other computers on the wired network behind your router....the router is the only device that might need PPPoE parameters set in order to communicate with the DSL Modem --- and these days, not all DSL Modems are using PPPoE.
D-Link has been in the past very interesting in how they comply with the overall 802.11g/b standards.....some of their default settings can cause issues for the Macintosh WiFi cards because Apple has implemented the standards in a standard way while D-Link chose to implement them such that they caused the least interference for the way that Windows is implemented......which is not quite to standard.
On your router (using the html embedded control pages) you should be able to fine tune the wireless network performance parameters by hooking your computer to the wired LAN port(s) in the back of the router, turning off your Airport card and then checking the Network prefpane to ensure that your computer has an IP address assigned in the range of 192.168.0.xxx ----
Now open your browser and send it to http://192.168.0.1 then log into the control page with the default username - admin - and no password.
This should bring you to the built in control pages Home......check to see if your router has an Advanced tab and if so, select it, then select the Performance button ------ this should be where you can fine tune the wireless network parameters that D-Link has set to their choice for defaults.
The setting that I seem to recall causing the most issues for Macintosh wireless networking in the past was the length of the Preamble ---- I believe that the choice that should work best is the Short Preamble......
The other setting that would best be adjusted is the one that uses any proprietary accelleration techniques to "double" the speed. On a similar vintage DI-624 I had to disable the "Super G" mode in order to keep the wireless network robust for all clients.
I hope this rambling response helps get you back on track.
So in summary, I think your new MacBook CD2 wireless card should be just fine.......your big challenge is in fine tuning the performance parameters that D-Link chose for the DI-524 so that your router can work in a more standard mode and then your new laptop should hook up as advertized.
When you upgraded the firmware, did you make sure that you had the proper version for your revision model? The D-Link support site Firmware Update page lists several different revisions to that model.
mb2.33hrz Mac OS X (10.4.8) (38518353)|

Can i connect ipad 3 to aprojector throught vga adapter and can i then mirror keynote presentations

can i connect my ipad 3 to aprojector throught vga adapter to mirror keynote presentations

I don't know if there is a Dock-To-VGA Adapter in the Store, but there is a Dock-To-HDMI-Adapter.
Newer projectors have an HDMI-Input-Slot. (30$ Adapter +10$ HDMI-Cable (if it doesn't exists)
You also could buy on top a HDMI-To-VGA-Adapter (30$ Adapter1 + 30$ Adapter2 + 10$ VGA-Cable (if it doesn't exists))
An deluxe solution would be an Apple-TV
+ HDMI-Cable
or + HDMI-To-VGA-Adapter + VGA-Cable
now you can use AirPlay by setting up an adhoc WLAN from your iPad which the Apple TV can use.
Cause I have an Apple TV, I take that with me with the adhoc WLAN setup of my iPhone.
All settings are done, so it's only a plug in at the room where to hold that presentation. Wirelessly from my iPhone Keynote-App via AirPlay to AppleTV (Mirrow or as second screen, with seeing notes and controls on my iPhone) and from Apple TV to the projector.

I can't connect my iphone to my ipad 4 hotspot .. can any one help me ?

before some days i bought ipad 4 wifi+LTE and till now i can't connect my iphone with ipad hotspot when i enter the passward my iphone can't connect so there is any way to make the connection ?

Troubleshooting Personal Hotspot
http://support.apple.com/kb/TS2756

Can't connect to pinterest on Mac - 404 and 403 errors

Hello all and thanks in advance for any help!
Our iMac can't connect suddenly to pinterest.com only. It connects to all other sites just fine and up until about 5 days ago, connected to pinterest fine too. None of the browsers connect to it, and all our other devices in the house connect to it fine.
Browsers that don't connect:
Chrome
Firefox
Safari
What we've tried that didn't work:
clearing cookies, cache, we history etc. on the browsers
restarting the iMac
Thanks again for help with this weird problem.

So, we're still having this issue and we even called our ISP. They had me run a traceroute and determined that it is timing out at ip 216.182.224.207 which is an amazon server: hxxp://216.182.224.207.ipaddress.com/
My ISP said that once it gets past all the "tbone" servers then it was out of Time Warner's realm. I called Amazon and they told me to call my ISP. I'm at a loss here - ideas?

TS1424 I can' t connect to iTunes using my iPhone and yet I can using my iPad

I am unable to connect to iTunes with my iPhone and yet I can with my ipad

Hello Kristie,
Thank you for posting in the Apple Support Communities. It sounds like you are able to connect to the iTunes store on your iPad but not on your iPhone. I found an article with steps for being unable to connect to the iTunes Store. Be sure to look under the section titled, "Troubleshooting on an iPhone, iPad, or iPod touch":
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
I hope this helps!
Best,
Sheila M.

I can't connect to my Windows machine from my G4 Others Can

Hi,
I'm new here, I'm sure this has come up before, but I couldn't find a solution in the forum.
I'm trying to connect a G4 running 10.3.8 to a Windows 7 PC unsuccessfully. However I can connect to it and share with both an Intell based PowerMac and a newer Power PC G5.
The G4 sees the other computer on the network, but when I enter its username and password I get the message,
"The alias named xxxxxxxxxxx could not be opened because the original item can not be found."
Also, the error message on the console reads,
"mount smbfs: unable to list resources: syserr=function not implimented
I can however successfully ping it through the terminal.
I've pretty much run out of ideas, so if anyone would be able to help I'd really appriciate it.
Thank you,
Eric

Hmmm, link works here...
Archived - Mac OS X 10.4: Error -36 alert displays when connecting to a Windows server
This article has been archived and is no longer updated by Apple.
Symptoms
Mac OS X 10.4: Error -36 alert displays when connecting to a Samba or Windows server
After upgrading from Mac OS X 10.3.x to Mac OS X 10.4, you may get an error message when you try to connect to a Samba or Windows (SMB/CIFS) server. A Samba or Windows (SMB/CIFS) server includes servers operating on Microsoft Windows and other operating systems that use Samba for SMB/CIFS services.
If the connection is unsuccessful, the following error message may appear:
The Finder cannot complete the operation because some of the data in smb://........ could not be read or written. (Error code -36).
If you check the Console (/Applications/Utilities/), you will also see this error message:
mount_smbfs: session setup phase failed
Resolution
This error can occur if your Mac OS X 10.4 client is trying to connect to a Samba or Windows (SMB/CIFS) server that only supports plain text passwords. If you do not see the above message in the Console, you are not experiencing this issue and should try normal troubleshooting
Unlike Mac OS X 10.3, the Mac OS X 10.4 SMB/CIFS client by default only supports encrypted passwords. Most modern Samba or Windows (SMB/CIFS) servers use encrypted passwords by default, while some Samba servers might have to be reconfigured.
You should consider contacting the owner or system administrator of the Samba or Windows (SMB/CIFS) server to which you are trying to connect and encourage them to disable plain text passwords and start using encrypted ones. If the server cannot be reconfigured to support encrypted passwords, you can configure Mac OS X 10.4 SMB/CIFS client to send plain text passwords.
Warning: If you configure your computer to allow connections to Samba or Windows (SMB/CIFS) servers using plain text passwords, when you attempt to make any connection to such a Samba or Windows (SMB/CIFS) server, your password will be sent "in the clear". This means that it is possible for someone who is monitoring your connection to see your password. This could lead to someone compromising the Samba or Windows (SMB/CIFS) server. We strongly recommend that you configure your Samba or Windows (SMB/CIFS) servers to exclusively use encrypted passwords.
Follow the steps below to configure your computer to use plain text passwords to make SMB/CIFS connections when the specified Samba or Windows (SMB/CIFS) server does not support encrypted passwords. (You must be an administrator to do these steps.)
Make sure that you are not currently connected to any Samba or Windows (SMB/CIFS) servers and that you do not have any Samba or Windows-related error messages open.
Open the Terminal (/Applications/Utilities/).
At the prompt, type: sudo pico /etc/nsmb.conf
Press Return.
Enter your password when prompted, then press Return again.
You should see an empty file and a "New File" notice at the bottom of the pico window. If you do not see the "New File" notice, this file already exists.
Enter the following into the file so that it appears as follows:
[default]
minauth=none
Save the file (press Control-O), press Return, then exit pico (Control-X).
Type: sudo chmod a+r /etc/nsmb.conf
Press Return.
Restart your computer.
Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple’s recommendation or endorsement. Please contact the vendor for additional information.
Also, does the PC connect to that Mac if you enable Windoes Sharing on the Mac?

I can`t connect to echolink from Ipad2 to Ipad2,however I can connect to a pc

I can`t connect from Ipad2 to I pad2 using echolink,however I can connect to anoher PC.

Lots of viewers but no replies.Guess no one knows the answer.

I can not connect to a web site at office, but home can

I can not connect to a cfml web site at office, but home can...well I copied ste file from home to office but didn't work, well?

If it's in an office that you are having trouble connecting I would highly recommend consulting with your IT department in the office to ensure that they are not blocking the connection with the corporate firewall.

I can't connect to App Store after iOS 7 upgrade, I can't connect to App Store after iOS 7 upgrade

I can't connect to the App Store after iOS 7 upgrade

I could always connect, but I couldn't search for anything.
Just tried the steps in this thread:
Log out (Settings > iTunes & App Store) then did a hard reset (Home and Power button) then signed back in.
That worked for me.

Can't connect JAI CV-M1 camera to PCI-1409. Error: 'Can't lock on video source'

Similar Messages

Maybe you are looking for