Can't connect MacBook to Mac Pro (wrong icon!)

Hi there,
i'm having some problem when trin to connect my MacBook 13" (Aluminium - Snow Leopard) to my Mac Pro (3,1 - Snow Leopard).
Mac Pro icon is shown in the finder left column but it shows the Windows PC icon instead of the right one (had this problem even before Snow Leopard).
When trin to connect to server from Finder this is the message:
"The server may not exist or it is not operational at
this time. Check the server name or IP address and
your network connection and try again."

To have your Mac adjust settings automatically, a display must answer with its name and capabilities when the Mac sends a query. The Mac sends such queries:
• at Startup,
• when you click the ( Detect Displays ) button [ try holding down Alt/Option key while viewing System Preferences > Displays] or
• when your Mac awakes from sleep.
So first set your display to the appropriate port. Next try a Restart, or Sleep and wake your Mac, or use the ( Detect Displays ) button.

Similar Messages

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

I'm having multiple crashes on my new 5s. I can't connect to my Mac Pro!! Power cord broken. How can I fix this without connecting to my MacBook? Very frustrating and disappointing. Please help!!!

Hi there Rlong50,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
-Griff W.

Can't connect my 2009 Mac Pro to HDMI with an AMD Radeon HD 7870

That's the basic jist. I recently purchased an early 2009 3.33 GHz Mac Pro running OS X 10.8.5. Installed was an AMD Radeo HD 7870 2048 MB graphics card, which has an hdmi port. I'm able to connect a display via the mini-DVI output, but when connecting through the HDMI input on either my moniter (22" ViewSonic VX2270SMH-LED) or my tv (a 32" LG LED TV) there's no signal. When I plug the hdmi from the computer into one of the tv's two hdmi ports, it recognizes a device and asks to switch over. When I do, it tells me there's no signal.
Again, my specs:
Mac Pro Early 2009
Mac OS X 10.8.5
3.33 GHz Quad-Core Intel Xeon
16 GB 1066 MHZ DDR3 ECC
2 TB SATA Disk
AMD Radeo HD 7870 2048 MB
Help!
Many thanks.

To have your Mac adjust settings automatically, a display must answer with its name and capabilities when the Mac sends a query. The Mac sends such queries:
• at Startup,
• when you click the ( Detect Displays ) button [ try holding down Alt/Option key while viewing System Preferences > Displays] or
• when your Mac awakes from sleep.
So first set your display to the appropriate port. Next try a Restart, or Sleep and wake your Mac, or use the ( Detect Displays ) button.

How can i connect my 2008 mac book pro to a tv?

how can i connect my 2008 mac book pro to a tv?

The Mini-DVI to DVI adapter is designed for the iMac (Intel Core Duo), MacBook, and 12-inch PowerBook G4 — allowing you to connect to an external DVI monitor. It can also be used in combination with the Apple DVI to ADC adapter to support older Apple flat panel Studio or Cinema Displays.

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

Can iMac 27 late 2009 enter TDM connected to a Mac Pro late 2013?

I'm trying to get an iMac 27 late 2009 to enter target display mode when connected to a Mac Pro late 2013.
I tried with Apple's Thunderbolt cable and pressing Command + F2 on the iMac did nothing.
So I bought a Mini DisplayPort cable, and now Command + F2 makes the iMac's screen turn black for a second and then back.
After rebooting, before logging in, if I press Command + F2 it actually works for about 2 seconds and then back to the iMac's screen. After this, if I keep trying it just flashes black.
So, my question is, has anyone managed to connect this two devices?
Should I buy another cable? Format the iMac? Any suggestions?
Thanks for the help.
OS X Mavericks 10.9.4 on both machines.

Thanks for your help.
I don't know what more I can add to the initial post.
The second Mini DisplayPort cable that I tried is Belkin, I don't think there are better cables for this, since Apple is not selling it anymore.
I did mentioned that if I restart the iMac, before logging in with any user, pressing command + F2 or simply connecting the cable will actually work, it shows up as a second display on the Mac Pro, I can move the mouse pointer on the iMac. But after about 2 seconds the iMac exits Target Display Mode, and after this pressing Command + F2 will only turn iMac's monitor black for about a second and not entering TDM anymore.
I even checked the firmware versions and both are up to date according to this.

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme..

Can this be done? Airport extreme connected wireless in extend mode to connect a wireless Mac Pro with an ethernet cable from the extended airport extreme.

This will work.....IF....you also have an Apple AirPort router configured to provide your wireless network.
In other words, you need to have two Apple AirPort routers to extend a wireless network.
When the AirPort Extreme is configured to "extend" the wireless of the "main" AirPort, it will provide more wireless coverage and the Ethernet ports are enabled, so you could connect your Mac Pro to any of the Ethernet ports and use that as a network and Internet connection.

Wifi macbook and mac pro desktop

Hi, not sure if this is the right place to post this. I have a Macbook that can see my router and connect no problem. My Mac Pro desktop computer is far from the router and I want to connect wirelessly, but the Mac Pro can't see the router, even though it has an airport card and is right next to the Macbook. I'm not too wireless savvy — any help would be appreciated. Is it possible for the Macbook to share it's connection with the Mac Pro? I need a quick fix that doesn't involve running a network cable across the house...
Thanks!

OK, so now you know the wireless card is working, or appears to be working because you can see other networks.
The next task is find out if it will connect to your network, and to do this, you'll need to move the desktop maybe half the distance to the router and see if you can get a connection.
If you can, the area where you had the desktop will need a stronger wireless signal. You don't mention what type of router you are using, so using an AirPort Express to extend the wireless signal can't be recommended..yet..since it may not be compatible with your router.
If you don't want to move the desktop and have to have a connection in the next few hours, get a pair of ethernet powerline adapters. This will be almost as good as a straight ethernet cable and far better than wireless. The adapters (one at the router end and the other at the computer end) use the wiring within your house to transport an ethernet signal.
Best Buy will have a selection or look under "ethernet powerline adapters" in google.

How many Sapphire Sapphire RADEON R9 270X can i install in my mac pro 2009?

How many of the graphics cards can I install in my mac pro 2009? Sapphire Sapphire RADEON R9 270X
Thanks

Why? do you use FCP-X? that will benefit from two. Also gaming in Windows where you can use Crossfire
You have two 6-pin power feeds so you will need a small 450W PSU - those come with two 8-pin and two 6-pin.
Those can often fit in the optical drive bay and cost $25-75 range.
"500W" is NOT for the card! that is the minimum PC PSU only!
when buying look for card that uses only two 6-pin and not an 8-pin power.
75W for the PCIe slot, and 150W from two 6-pin cables, most GPUs fall into the 200-250W at maximum stress levels8-pin is basically two 6-pins and 150W feed
> we CrossFired a pair of Radeon R9 270s in our 2010 Mac Pro tower. Under Windows 7 64bit Ultimate, it registered 145 FPS in the Diablo test.
http://barefeats.com/tube06.html
Keep in mind that the Mac Pro tower can't feed enough power to the dual 980s, dual 290Xs, or dual 7950s.
We used an auxillary power supply to compensate.
For the hard core GPU rendering, there are external expansion boxes with their own power supplies.
In an earlier article, we featured the Cubix Xpander which facilitated the connection of 5 GPUs to the Mac Pro tower.
If you favor an AMD GPU like the Radeon R9 290X, MacVidCards can modify it to run at PCIe 2.0 bandwidth in your Mac Pro tower.
The Sapphire Radeon R9 7950 Mac Edition is available from OWC and TransIntl.
February 6th, 2015 -- Dual GeForce GTX 980s vs other Dual GPUs running multi-gpu 'aware' apps
February 6th, 2014 -- (UPDATE) GeForce GTX 980 GPU versus 8 other GPUs running Games and OpenGL Benchmarks
January 29th, 2015 -- GeForce GTX 980 vs 9 other GPUs running Resolve, LuxMark, and Octane Render
December 28th, 2013 -- Does Final Cut Pro X 10.1 render faster on Mac Pro towers with Dual AMD GPUs? What about Motion 5.1?
Things to keep in mind:
The Radeon R9 280X we used was 'un-flashed.' It booted OS X fine but there was no startup screen. Also, when we checked the speed of CPU-to-PCIe-to-CPU communication, it appeared to be running in PCIe 1.0 mode instead of PCIe 2.0. However, unless the GPU intensive app saturates the PCIe 1.0 bandwidth, it will not run any faster in PCIe 2.0 mode. http://barefeats.com/tube12.html
Which is one reason why you might want to buy pre-modified cards from http://www.macvidcards.com

Why can't I access my mac pro from other computers

I can't seem to access files from my Mac Pro from other computers on our network. It asks for a username and password, which it says is always incorrect. Any ideas on how to fix this? We have two main workstations that need to access a single Fire Wire 800 DRobo array that's connected to the Mac Pro tower.
Thanks!

File Sharing must be enabled on the Mac Pro. in System Preferences > Sharing
System Preferences > Accounts > Guest account must be present and must allow File Sharing, but need not allow guest login.
Although the login pane appears on the screen of the second computer, the login it is asking for is an account and password that is valid on the Mac Pro (the computer whose files you want to share). The number of bullets in the password field is fixed -- it has no idea how long the password is. Passwords are case sensitive.

Connect iphone to mac pro

My iphone 5 can not be connected with my Mac Pro with bluetooth.
Any idea what i can do to solve this issue?

Other than for purposes of tethering, there is no way to connect the iPhone to the Mac.
http://support.apple.com/kb/HT3647

Problems printing to printers connected to a MAC pro from a Windows Laptop

Folks,
I got a MAC PRO a couple of weeks ago and I have two USB printers (an EPSON CX 4200 and a CANON S900 connected to it).
I tried both Ifelix's procedures to add the printers connected to the MAC and I had problems with both procedures.
If I try the http://mac-ip:631/printers/printer-name I am successful in adding the printer to the Laptop running windows XP however when I try to send something to that printer the job goes straight to the "completed" queue on the MAC and nothing prints at all. I used the respective windows drivers for each printer on the XP Laptop.
I spent two hours with Apple support on the phone and they could not figure out what was going on and suggested that I post my issue to this forum to see if anybody has any ideas.
I also tried to configure the printers using Bonjour (as per Ifelix's documented method) but at some point during the printer setup I get an error message indicating that I do not have "sufficient access" to install the printer driver even though I am logged in as admin on the windows XP computer.
Has abybody experienced similar pain? Is anybody here being able to print to printers connected to a MAC PRO from a Windows XP laptop?
I should also say that my computers are in a network and both are connected to a Linksys Wireless Access point/router.
The Laptop is a wireless laptop and the mac pro is conneced to the linksys router via a regular network cable.
Also, I have no issues printing straight from the mac to both printers.
Would appreciate any suggestions/comments.
Thanks in advance for your time.
regards,
marcelo

What risks does that imply?
Well, it implies that the battery is not user serviceable, which it is not. However, your warranty has already been effectively voided by the spill. So, you don't have that much to lose. As I already said though, there are risks inherent in cleaning any electronic equipment with any sort of liquid. The safer route is definitely to take the machine in for repair, as eww says.
And for the Q-tips, when I opened the machine, it seemed really complicated to unmount or access parts with Q-tips.
Unfortunately, it is complicated. It's not something to undertake unless you are comfortable with it. And it can never be guaranteed that it will actually be clean because there are many spaces that you'll never be able to clean. I should perhaps emphasize that I would only clean the machine myself if there was no chance of being able to pay for repairs. It is sort of a last-ditch option to attempt to avoid the cost of repairs. Nothing is guaranteed though and you may have to pay for repairs anyway.
Wouldn't it be better to just let it bath in the distilled water, wait a few minutes and then let it dry?
Definitely not. If you do that you can forget about the machine ever working again, at all.
do you think there is hope that once cleaned, everything would work again ?
It is doubtful. Like I said, if paying for repairs are not an option, then you should consider at least attempting to clean it. Otherwise, you should have the top case replaced (new keyboard and trackpad).
--Travis

Problem connecting to new Mac Pro with USB

I have a new late 2013 Mac Pro 6 core with 64GB RAM and a 1 TB SSD. I use a Thunderbay IV Thunderbolt drive bay and a Newertech Voyager for external storage and backup. The Thunderbay works perfectly. When I place a 4TB drive with a couple of TB of data (photos) into the Voyager, it appears as an empty 1.8TB drive. If I take the exact same drive and place it into the Thunderbay via Thunderbolt, it sees it as 4TB, sees the data, and seems to have no problem. If I ask disk utility to verify the disk in the Voyager, I get this message "Error: Partition map check failed because no slices were found." This happens regardless of which of the 4 USB ports I connect it to. Basically the drive will boot just fine in the Thunderbay, (Thunderbolt) but not in the Voyager (USB). I initially thought the Voyager was at fault, but this has happened with both a brand new S3 USB3 unit as well as my older Voyager Q USB 2 unit. I can connect a USB 3 card reader with no apparent problems as well as my iPhone, iPad, and two Epson printers. I am thinking that there is some problem with the USB connections in the Mac Pro but would appreciate any thoughts.

You got me curious so I dug further. We weren't alone in that problem. See this Apple discussion. And this review mentioned the 2TB limit as did this one. We both were the victims of progress. I remember when a 40MB HD upgrade was a big and expensive deal for an SE-30.

How can I configure my new Mac Pro to output the timeline via HDMI

How can I configure my new Mac Pro to output the timeline in FCP 7 (yes, I have X, but I'm using 7 right now). I have two monitors running from TB2, but want to have the third for a client monitor.
If I use all three via TB2, it's literally three monitors, and I want to edit on my CineDisplay. I only want the client to see the timeline video on the third monitor. When I hook up HDMI I get no signal, in fact, I can't have the HDMI cable hooked up for TB2 to work with the third.
Thanks,
GEvans
DarthPro
3.7 QCIntelXeonE5
12 GB
AMD FirePro dual D300 2048MB
OSX 10.9.2

If you use all ThunderBolt displays, or stick with DisplayPort and Mini DisplayPort (free conversion between the two with only a cheap cable) you can have up to six displays.
If you attach "legacy" displays with "any-old adapter", you can have up to two, and the built-in HDMI counts as one if you use it.
Any more requires ACTIVE Adapters.
The US$100 Apple ACTIVE Mini DisplayPort to Dual-Link DVI adapter works in every case, even displays over 1920 wide.
StarTech and Accell make US$35 ACTIVE adpters that work for displays up to 1920 wide.

How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

Composite is analogue with one connector. That is why it is called composite
Component is analogue with three connections. I think one for each color
Here is the one for component. I misread composite for component
http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

Can't connect MacBook to Mac Pro (wrong icon!)

Similar Messages

Maybe you are looking for