Can't connect mobile devices to HWIC-AP-AG-B.
Hey everyone.
I just started a home CCNA lab and I've begun with an 1841. So I could toy around with wireless, I bought an access point WIC, the HWIC-AP-AG-B. I've configured one SSID, 1841_WLAN, with a WPA2-PSK security code "password" and both dot11radio interfaces, 0/1/0 and 0/1/1, have AES and TKIP ciphered encryption. As for IP addresses, I have a DHCP pool, also named 1841_WLAN, providing dynamic addresses with a default gateway address set as the IP of the dot11radio0/1/0 interface, 172.16.1.62/27.
When I connect my laptop to the SSID, it is given a dynamic IP address with no problems; the first one in the range as expected. However, when I try to connect my iPhone or iPad, it gives them link-local 169.254.x.x addresses.
I've done a lot of research and I can't find the solution to this. I did learn that Apple devices aren't friendly with WEP but I'm using WPA2 so that shouldn't affect me. If anyone knows a possible solution to this, please let me know. I can provide any snippets of my sh running config output upon request so let me know if it would help. I'm still a beginner...
Thanks for reading.
Hi,
Configure only AES as encryption & disable TKIP. That should work
WPA2 require AES & not TKIP, when you configure both AES & TKIP , some clients do not like it.
HTH
Rasika
**** Pls rate all useful responses ****
Similar Messages
-
Can I connect window device like modem, mobile in oracle forms,if possible then how?
Hi Tony,
So explain where you would see your notification?I just mention, Leave module, there are many other module. For example In Purchase Purchase Requigition , Production Module Production Complite , Delivery Module Delivery Ready.
For this it will better to show at respective Menu.
In the Window title?Another good Idea !
You could have a timer trigger that runs every 5 minutes and checks a notification table, if there is an unacknowledged notifcation, then you could change the Window title of the formas app to show a (1) at then end of it.Timer has a bad this.. For example, if i make a timer and run every 5 min. then if user works on a form, timer will hide the form and show the timer window.
Isn't it ?
Would that do, or do you need more?Yea.. More..It will be like facebook. If any notified work is done by any person, light will go off.
Thanks for your interest and suggestion...
Ask2Learn
Edited by: Asked to Learn on Jan 23, 2013 12:36 AM -
Can't start mobile device service error 1503
I'm using win7 ..
I recently tried to sync my iphone4 with the itunes
And a message poped up say " can't start mobile device" sth like that
Then I followed some solution on the apple webiste..
But when I try to restart the service..
It said " Error 1503 "the service did not respond to the start request in a timely manner" "
What can I do to slove that
Thanks !See Troubleshooting issues with iTunes for Windows updates.
tt2 -
After downloading the latest Itunes software, I can't connect any device to Itunes!
After downloading the latest Itunes software, I can't connect any device to Itunes. I am using windows 7!
i am using windows 8 and still can't find my iphone on itunes
-
How can i connect mobile internet (USB devices)??
Is there anyone who knows how can I can connect a mobile internet device connected through a USB port to my IPad-2?
The iPad only supports wifi and 3G, it can't connect via a USB connection - it can use an iPhone as a mobile hotspot (if your carrier supports it) or mifi devices.
-
Can anyone help me?
Hi!
You should be fine. How are you, exactly, trying to pair both devices?
If the pairing code (3 lines with 4 characters each) doesn't work for any reason (you should get the code from the computer and add it to your tablet) you can get the Recovery key from your tablet and use it to connect the computer to that account.
In order to get the Recovery Key, you need this add-on in your mobile device: https://addons.mozilla.org/en-US/mobile/addon/aboutsynckey/
Once you get the recovery key, follow the steps described here: https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync#w_connect-another-computer
I hope it helps. -
Connect mobile device to SP2013?
Hello Community
You can connect a mobile device to a SharePoint 2013 Server farm
like a Windows phone or IPAD but how and what is the difference between
a Windows phone and any other kind of smart phone?
Thank you
ShabeautNo. It means that most smart phones have browsers that are capable of accessing a SharePoint based web site just like any other web site. There may be some differences between say IE on a Windows phone and Safari on an iPhone. But SharePoint
is a web based product. You can access a SharePoint site using just a web browser if the SharePoint server is available on a network that the smart phone can reach. But that has nothing to do with a specific smart phone, a USB connection, or Windows
8.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Can't connect wireless device to airport extreme
I bought airport extreme router second hand and am connecting it to HP desktop windows 8. All software is installed properly and router is connected. I have a solid green light, and internet access on desktop, but cannot connect wireless devices to network (kindle, cell phone, etc.) All wireless devices show excellent network signal strength, allow me to put the password in, but all show connected and have not internet access.
This appears to be a simple modem, so assuming that you reset the modem completely before you connected it to the AirPort Extreme, the next step would be to check to insure that the AirPort is in router mode and not bridge mode.
Open up AirPort Utility, click on the AirPort Extreme, and then click Manual Setup
Click the Internet icon at the top of the window
Click the Internet Connection tab just below that
Make sure that the setting for Connection Sharing is set to Share a public IP address
Click Update to save any changes, and give the AirPort a full minute to restart
Check the network again to see if devices can connect now. -
Can't get mobile device to auto configure the active sync server
Hello
I am trying to get my costumer mobile devices to auto configure the active sync server name so they don't have to type it in. I believe I have everything in place Certificates are fine. I populated the external url on the active sync
object in Exchange.
DNS is set up correct. I ran the Exchange Connectivity Analyzer and it runs perfectly. The only test step if fails on is the first attempt to contact the autodiscover service using just the domain name and that is because we have a
record in DNS so our domain name points to our public web server but all the other tests run fine. At the end, it even displays the xml file contents and shows me the external url of the active sync object.
I get a successful run but it first shows SSL certifiate of our public Web site and then hangs on the server config and then prompts me to enter in the server name and domain. My external url in Exchange looks like this:
https://remote.domain.com/Microsoft-Server-ActiveSync
Any Help??
EddieThank you for replaying but there is already internal A record that points to Exchange server. Firewall, DNS external and internal are setup like this:
Firewall:
Port 443 and 25 points to Internal IP of our Exchange 2013 (only mail server in company).
Port 80 not open.
External DNS records:
autodiscover.mydomain.com à points to our WAN IP
remote.mydomain.com à points to our WAN IP
mydomain.com à points to external online webhosting
Internal DNS records:
autodiscover.mydomain.com à points to ours Exchange 2013 internal IP
Remote.mydomain.com à points to ours Exchange 2013 internal IP
mydomain.com à points to external online webhosting
Test form "ExchangeConnectivityTest.com" is Successful but with warnings.
Warnings are about https://mydomain.com/AutoDiscover/AutoDiscover.XML
because
https://mydomain.com is
pointing to website, which is hosted externally.
Eddie -
Tried to update device software, now can't connect to device via USB
I tried to update my 8100 to the 4.5 software. I first updated the desktop software to 4.7, then tried to update the device, but the process failed.
Now, when I open desktop manager it shows as not connected to the device. I can go into the device mamager properties and select the balckberry, but when I return to the destop amanger it says no device.
It appears that whatever I do it does not recognise the usb device.
The display on the 8100 is only text, no graphics or phone company info, and it is basically inoperable.
There are options on the display for some applications, but if I choose them, it says app not found.
Is there a way to force an update to it? Or have I poohed this phone?
Thanks in advance
edit:
I have pulled the battery on the unit to reboot it, and have tried going back to an older revision of desktop manager
Message Edited by gw22 on 12-05-2008 04:22 PM
Solved!
Go to Solution.1. Unplug the BB from the USB and PC. Reboot the PC completely from off.
2. For the BB, you might not have loaded back the Theme that was in use on the device when you upgraded, which will normally give you a black/white screen. You need to follow the instructions below.
You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I using WRT54G v2.2 Fimware 4.21.1 but connect all mobile device link PPC or IPhone . Also i not have any firewall config and i am sure the golekey is correct.
If we take the error message at face value, you've got a damaged Apple Mobile Device Support program file there, carmelle.
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select Apple Mobile Device Support, and click "Repair".
Does that fix up the error message for you? -
Guestnetwork is visible but I can not connect any device
Hi there,
I us an Airport Time Capsuale, Version 7.7.1.
I created a Guestnet, all fine so far.
Now I try to connect with my Iphone or Ipad to test it and I can not connect.
I can see the Guestnet, I type in the password and the device is trying to connect. trying trying trying but not connecting.
Going back to my private Network, all fine, direct connection.
Any idea what is missing or happening to work proper?
Thanks and best regards,
MichaelThe first thing to check is the setting for Router Mode on the Time Capsule.
Open AirPort Utility, click on the Time Capsule, click Edit, and click the Network tab at the top of the window.
Check the setting for Router Mode. If it is now set to "Off (Bridge Mode)" the Guest Network feature will not operate correctly in that setting.....unless....you have another Apple router on the network that is acting as the "main" router for the network.
Can you provide the make and model number of your "modem"?
It is possible that the Time Capsule needs to be in Bridge Mode to work correctly with your "modem".
If this is the case, then unfortunately it will not be possible to enable the Guest Network feature using the modem that you have. -
Can I connect a device to get added LAN ports for my Airport Extreme?
Can I connect an added device to my styetem to get added LAN ports for my Airport Extreme Router system?
Mark EdwardsConnect a Gigabit Ethernet switch to any of the 3 Ethenret ports on the AirPort Extreme to add as many ports as you need.
Switches come in 5-port, 8-port, 16-port, etc versions.
Your local computer/electronics superstore will have what you need. -
Bluetooth does not work, i can't connect any device
bluetooth does not work, i can't connect any device
What device?
Iphone supports bluetooth for stereo headsets/speakers, handsfree telephone devices/headsets, some keyboards, some peer-to-peer apps from the app store, adn internet tethering where provided by the carrier.
Other than this it will not connect to another phone, computer ,device -
Hi guys, I upgraded mi Flame to FirefoxOS 2.0 following the guideslines on https://developer.mozilla.org/en-US/Firefox_OS/Developer_phone_guide/Flame.
I updated to 'latest v2.0' of production builds. It rebooted normally and I checked out version improvements, but I now I can't access the device via adb or fastboot or throught Web IDE.
I selected ADB and developer tool for USB debugging and nothing. Only ADB and nothing.
I even tried factory reset but It kept v2.0 and no adb connection :(
Any suggestion?
Thank in advance
Héctor FernandoHi hectorfhurtado,
I encountered the same issue today when attempting to file and log some bugs for Firefox OS. I asked on the IRC channel #b2g and got the following response from Fabrice:
"''known bug, should be fixed in tomorrow's update.''"
I hope this information is helpful. Please let us know if you have any other questions.
Thanks!!
- Ralph
Maybe you are looking for
-
I just have a procedure in which i do have a dynamic query.It has certain parameter on the basis of which different set of columns will be returned in the result set. Now I want a SSRS report which can automatically pick up the columns from the Proce
-
Transaction type 180 not possible (no affiliated company specified)
Hi, I am trying to do the down payment Request in F-47 with Purchase order and asset. When I am trying to do this by giving the Asset number and Purchase order with Item 10. I am getting this error Transaction type 180 not possible (no affiliated com
-
How to use DVB on ArchLinux (with an em28xx chip)?
Hi there, I'm trying to figure out how to use my Terratec Cinergy Hybrid T USB XS on ArchLinux. It should use the em2880 chip. I think that the correct kernel modules are already bundled with the latest kernel version: bash-3.2# lsmod | grep 'em28' e
-
Get Attachment Name and from address of mail in bpel process
Hi All, I am using UMS Adapter to poll email server and getting the attachment and saving it to local disk. In Payload from UMS adapter i am getting href of the attachment but I am not able to figure out as to how to get Attachment Name and From A
-
Thats what my friend in Australia said to me (I am in New Zealand so 4 hours on a plane away! so cant go look) Itunes was copying a cd and was about to burn it evidently and asked her to insert a blank disk so she stuck it gently in the slot and it s