Can't connect my 3G iPhone to new wireless networ

We just had a new wireless router installed in our home by Time Warner. My wife and I were able to connect our laptops to the network, my iPad and my wife's 3GS phone connected no problem. However, when I try to connect my 3G iPhone, it sees the network but keeps jumping from seeing the network to saying not connected. Also, when I try to join the network, it will not prompt me to enter the password instead in goes to the more complex screen with forget this network, DCHP etc. Any ideas on how I can fix this problem?

Try something else that is very easy to do. Restart your iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Similar Messages

  • My account is saying it can't connect - I know I have new emails but they're not showing in my inbox

    My account is saying it can't connect - I know I have new emails but they're not showing in my inbox. Thank you

    http://support.apple.com/kb/HT2519

  • I can't connect wifi my IPhone 4S

    I can't connect wifi my IPhone 4S

    Hi imblessed0209,
    The articles linked below can help get your iPhone to appear in iTunes as well as help get it connected to your Wi-Fi network.
    If you don't see your connected device in iTunes for Mac
    https://support.apple.com/en-us/HT203979
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    https://support.apple.com/en-us/HT204095
    If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network
    https://support.apple.com/en-us/HT204051
    Regards,
    Allen

  • How many devices can I connect to my iPhone hot spot?

    how many devices can I connect to my iPhone hot spot?

    Thank you.  I guess I don't need an additional hot spot device.  Thanks.

  • Hp6700 Printer: can't connect to D-Link DI-514 Wireless Router when Broadcast SSID is set to NO.

    HP6700 Printer:  can't connect to D-Link DI-514 Wireless Router when Router Broadcast SSID is set to NO. My MAC LapTop and HP LapTop both work with the SSID set to NO. If I change the Wireless Router to Broadcast SSID is YES, then the HP6700 Printer can connect to the Wireless Router. I setup the Printer telling it what the SSID and Password were, the same as both of my LapTops, but it never connects, unless I change the Router to broadcast the SSID. Help!
    This question was solved.
    View Solution.

    Did you try updating the firmware on the DI-514?
    You can also try setting a static IP on the printer, then assign the printer to the static DHCP list in the router interface.
    To give your printer a static IP address:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you will have delete and re-add the printer on your Mac.
    Show support by clicking the blue Kudos star in the post that resolved your problem. Doing so will help other forum members find their solutions too.

  • Can't connect to the internet on a wireless system at school, but fine when I'm at home.

    Can't connect to the internet on a wireless system at school, but fine when I'm at home. All semester, there was no problem getting on the wireless system at school.  I had a problem, put in my school log-in and password and saved it in keychain.  Since, that time I have been unable to connect to the wireless system at school.  I delete this action out of "Keychain" and went to "Preferences" and deleted the "Keychain" action, but today at school I couldn't log in.  Any suggestions would be appreciated.  MacBook; OS 10.5.8

    I think your best bet is to go to technical support at your school (hopefully you have one) and they will help you out. The only reason I can come up with as to why you are not getting wireless access is that your settings are wrong (need to turn airport on) or your computer is not registered into the university.
    Good luck.

  • Can't connect to SQL Database using new login

    I can connect to Azure SQL Database using the admin ID created when I set up the Azure account.  Now I want to set up a different login that has only regular read/write privileges.  I have followed the instructions on several web posts, to create
    a login at the server level, then create a user at the database level from the login.  When I try to connect, though, the connection fails.  I get an error message, and a GUID that I am supposed to supply to MS tech support, except that all I have
    is a standard Azure subscription, which does not include tech support.
    Here is what I have done so far:
    Logging in to the server with the admin account with SQL Mgmt Studio, I go to the master database on my Azure server, and create the login:
    CREATE LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
    This appears to work (password supplied is a "strong" password), or at least it doesn't show any error response.
    Then, connecting to the production database in Azure, I set up a user and set permissions as follow:
    CREATE USER clouduser1 FROM LOGIN clouduser@gxw8x04nlb;
    EXEC sp_addrolemember 'db_datareader', 'clouduser1'
    EXEC sp_addrolemember 'db_datawriter', 'clouduser1'
    When I attempt to connect to Azure using the new login, however, I get an error message (from SQL Mgmt Studio as well as from MS Access).  I am using the SQL Server Native Client 10.0.
    The message is:
    Connection failed:
    SQLState '28000'
    SQL Server Error 18456
    [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'clouduser'.
    Connection failed:
    SQLState: '01000'
    SQL Server Error: 40608
    [Microsoft][SQL Server Native Client 10.0][SQL Server]This session has been assigned a tracing ID of
    '271851d5-8e94-497c-a332-d9d40682bb7a'.  Provide this tracing ID to customer support when you need assistance.
    Is there some missing step I need to do, to permit the login to see the database?  I have looked for such in the various discussions about connection problems, but have not been able to find such a thing.   Or extend more permissions to the new
    user? Or specify a default user ID for a given login ?  (as they do not have the same names, in the examples I have seen).  I tried making the user ID the same as the login (w/o the server name), but that didn't seem to help, either.
    I have done numerous web searches, and tried about every variation of login or user ID, password, etc. that I can think of, and all of them encounter the same error.  It's got to be something very simple - clearly Azure supports more than one login
    per database.  But's that's all I have at the moment.  That login connects just fine, but others won't, using the same PC, middleware, IP address, etc.
    Any help would be much appreciated -
    Thanks,
         Doug

    Olaf -
    I noticed that, but all of the examples I have seen have Users named slightly differently from the Logins.  I did try logging in with the Login name instead.  No good.  I tried making the Login and the User name the same (clouduser).  Also
    no good - same symptoms.
    I think the problem is that the initial creation of the Login needs to be done WITHOUT the server name on the end.  
    Logged in to the master DB, I tried:  Create LOGIN clouduser@gxw8x04nlb with PASSWORD = 'xoxoxoxo';
    That didn't give me an error message, but I think it created a LOGIN of 'clouduser@gxw8x04nlb'.  When
    referenced from the outside world, I would need to specify 'clouduser@gxw8x04nlb@gxw8x04nlb'.
    I tried deleting the logins, and then creating the login 'clouduser' in the Master DB.  Then in
    the application DB, I created User clouduser from LOGIN clouduser, and then assigned a role.  That seems to work!
    In my connection string, File DSN, etc. I still need to supply the login as 'clouduser@gxw8x04nlb'.
     But when I am logged in to the server, and working in the Master DB or the application DB, I just refer to the Login as 'clouduser'.  
    Seems a little more complicated than it really should be, but at least I now have something that works.
    Doug
    Doug Hudson

  • How can I set up Wi-Fi connection between my iPhone 4 & my wireless Linksys WRT54G router?

    How can I set up Wi-Fi connection between this iPhone I bought and my wireless Linksys router (WRT54G) that I'm using for home netwrking for my PCs?
    Tried settings on iPhone, selceted Wi-Fi connection, then pressed my network name shown on this iPhone, but nothing happens after that.

    Do you not get the icon on the top bar of the iPhone?
    Once you press on the network, the iPhone should connect to it. If the Network has a wep or WPA key it should be requested at that time.
    Once the above has been completed, then the iPhone is connected. And you can use the wifi conneftion to browse the internet. It should also show a checkmark next to the network signifying it connected.
    If its having trouble connecting or taking some time you should see the   next to the network spinning around.

  • Can't connect to internet after updating new Firmware wrt54g Help please!

    So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

    I am having the exact same problem..  I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help..  It says if you can't access the web based page then to use the TFTP  utility to re-flash the router’s firmware but it seems it cannot make a connection to the router..  I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router..  I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well..  So what gives?  I followed the directions  but the only thing I seemed to accomplish was to brick my router..   Does anyone have a clue on how to go about fixing this problem?   Any help is appreciated.. 

  • HT4759 I can't connect my phone to my new Apple TV and have no airplay

    I got a new Apple TV and I can't connect to it

    Welcome to the Apple Community Wurzel.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Restart your mobile device.

  • Can we connect printer to iphone programatically?

    Hai,
    Can you please tell ,is it possible to connect printer in iPhone programatically?
    if it is connect,how can we develop?
    it is very urgent...Please Help me...
    Thank you

    You can connect it only using iPad camera connection Kit and it will work only for pictures. You may check this discussion for more info: can I use a usb drive with my iPad2?

  • Can i still use older iPhone if newer iphone is being repaired

    can i still use older iPhone 4S if newer iPhone 6 is being repaired

    Yes; if you transferred your service to the iPhone 6, you may need to contact your carrier.
    (124806)

  • My macbook can't connect with my iphone, my macbook can't connect with my iphone

    can't connect my laptop mac book with my iphone 4, keep on telling me to unlock my iphone password, both iphone and laptop already logged in with my apple account!!

    You can't do it because that is not, and has never been a feature of the iPhone. Bluetooth file sharing and bluetooth sync are not supported. The only thing for which you can use a bluetooth connection with a computer is tethering.

  • Can't connect wifi in iPhone

    Can't connect wifi in iPhone

    tap Settings > General > Reset > Reset Network Settings
    then try to connect

  • ITunes can't connect to my iPhone 5?

    Whenever I connect my iPhone 5 to iTunes 10.7, my iPhone doesn't show up on the left column and I get an error message saying "iTunes could not connect to this iPhone. The service did not start properly on the device." I tried restarting my MacBook and reopening iTunes but it doesn't seem to help. Any ideas?

    Restarting the phone did the trick for me.

Maybe you are looking for

  • Validations during PO Creation/Change

    Hi I want to do three validations during PO Creation/Change 1) After entering each item Quantity,a custom validation should be done 2) When Save Button is pressed in PO, custom values should get updated in custom table. 3) During save a validation is

  • Statements in calculation fields

    Can you use sql statements in calculated fields, for instance can you use a statement like IF(GL_SEGMENT-04='401000'TO'409999'THEN SUM(GL_BALANCE_PERIOD_BAL_DB-GL_BALANCE_PERIOD_BAL_CR) I would think that you could use statements within calculated fi

  • Problem in SXI_CACHE ReturnCode 99

    Hi Everyone, We're encountering a problem in our Test box. The return code for one of our integration processes is still 99 even after activating it in SXI_CACHE. In our acceptance box and Dev box, the return code is 0. Everything is working fine for

  • Folio Builder can't detect iPad CS5

    I've got my iPad (2) connected to my computer and the computer is picking it up, but InDesign doesn't see my iPad. I've got the Content Viewer open on the iPad and I've restarted InDesign and unplugged/plugged back in the iPad to attempt making a con

  • HT4009 Having Trouble with in-app purchases for Deepworld

    For some reason, my computer won't let me do an In-App Purchase in the game Deepworld. I have no idea what I'm doing wrong. Can anyone help me fix this?