Can't connect my express to my time machine base station?

can't connect my express to my time machine base station I am in a loop and frustrated

Ok, you have an older 802.11g AX. The steps to configure it for streaming are the same for both models. Let's go over it quickly just in case something was missed.
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing TC's wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX
Please post back your results.

Similar Messages

  • Can you connect an ipad to a time machine

    can one connect wirelessly, a ipad2 to the time machine?

    Dug586-
    I do not know of an App that will back the iPad up to a Time Machine.  You have to sync the iPad to your computer, and let the computer backup to the Time Machine.  That might be a feature for a future iOS update.  Why don't you suggest it by providing feedback to Apple?  <iPad Feedback>
    The GoodReader App has the ability to connect to servers, including the hard drive in a Time Capsule.  I don't know what ability that provides, but it may only apply to documents the GoodReader App can handle.  However GoodReader has the ability to zip and un-zip files, as well as the "Open In" option.
    Fred

  • Mac Book pro can't connect to Internet through Apple airport extreme base station

    I had problems connecting to the internet in the past with my macbook pro.  One day it suddenly started working again but then I bought a second apple TV I lost connectivity.  I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet.  When I hooked up the new Apple TV that I bought it booted my computer from it's ip address.  The apple TV though wouldn't work and now nor would my computer.  I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not.  Even if I plug in the ethernet cable from the base station it doesn't work.  It show that it has a self assigned IP address.  After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet.  If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
    It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine).  When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router.  I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet.  Can you please help me trouble shoot this?
    I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
    I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

    It has something to do with the connection from the base station to my computer
    I don't think so..
    I just posted a reply which totally vanished.. strange strange website now.
    Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
    Please tell us what modem you use.. is it a router??
    If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
    You need to also give us the screenshot of the IP you are getting in a computer that works.
    EDIT
    Sorry this is half double post.. the previous page refused to display.. now it has returned..

  • Can't connect to a VPN through Airport Extreme Base Station

    I'm unable to connect through my Airport Extreme Base Station to my office via VPN. Is there something needed to be set up specially?
    I'm using a notebook with WindowXP which connects to internet just fine.

    Here is info:
    Airport Utility finds an Airport Extreme with 802.11n(fast ethernet)
    Base Station Name: Home
    IP Address: 10.0.1.1
    Airport ID: 00:19:E3:FA:A8:32
    This is not the IP address of the modem. Even though light is green on Base station the ATV doesn't make the wireless connection.

  • 2nd Airport Express wont show up in  Base Station Chooser, iTunes

    Hi, I have 2 Airport Express units on the same network. One is showing up, the other is not. Both were working perfectly. I recently upgraded my router to a Linksys BEFSR41. When I run the Base Station Chooser, one shows up the other does not. The same happens in iTunes. I can address the Airport Express by chooser Other from Base Station Chooser, then entering its IP address. I updated firmware in both units to 6.3. Both units are configured identically. If I access the hidden airport express from a wireless PC it shows up fine but the other one does not

    Thank you for your post, but I do not understand why you are giving me a link to the generic airport express site. The configuration I have was working fine before I upgraded my router.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it?

    My time machine backup external hard drive has failed.  I have a newer external drive already connected to my MAC but can't figure out how to get Time Machine to set up on it

    http://pondini.org/TM/21.html

  • I am not able to sign in. Apple TV can't connect to server at this time. Please try later. I am using same ID and password as I do with iTunes. Can someone help me?

    I am not able to sign in. I am getting a message saying Apple TV can't connect to server at this time. Please try again.
    I use the same Apple ID and password as I do with iTunes and have no problems accessing that.
    Can someone help me?

    Unpower it.  If it still  happens on a restart give it time - Apple's servers sometimes have glitches.

  • Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

    I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously.  My old AE allowed this but can't make the new one work that way. 

    In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
    WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
    What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
    I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
    For Macs:
    o MacStumbler
    o iStumbler, or
    For PCs:
    o NetStumbler

  • Screen says unable to sign in Apple TV can't connect to server at this time. Please try later. It has said this since last night

    Screen says unable to sign in. Apple TV can't connect to server at this time. Please try again.  It has said this since last night

    I was running into the same issue for the past few days and decided... Heck, just try the old fashioned way and unplug the thing.  Boom.  Fixed it.  Try unplugging it and doing the old reset and see how that goes.
    Good luck!

  • Can only connect 2 Macs at a time to Airport/TC

    Just what the title says, I can only connect 2 devices at a time. If I want to connect a third someone needs to get off their Mac.

    This happens usually because the TC is in the wrong mode..
    Go to the airport utility and check if the TC is in router mode, ie DHCP and NAT.. if not place it in that model and tell me what happens.
    You need to give loads more info.
    Type of broadband and actual modem / router supplied is a good start.

  • Can not fine external hard drive for time machine sence lion was installed

    I can not fine external hard drive for time machine sence lion was installed, it don't reconise it at all.

    I have a Mac Mini (late 2009) and I have an iomega 1TB external hard drive connected to my mini via firewire and usb (usb allows me to use the usb ports on the external 1TB drive to daisy chain other devices).  Since I installed Lion, my Time Machine  and this 1TB drive (and its partitions) is finicky.  Sometimes it is mounted and sometimes it is not.   This issue has only surfaced post Snow Leopard and in the Lion era. I am not the first to say this but the whole reason I went Mac was b/c of Vista.  I am beginning to think that Lion is the new Vista.  Sorry for the latter, just venting... b/c this ain't the first issue with Lion.

  • How can I reconfigure an Airport Timecapsule and Airport Extreme Base Station to extend a new Time Capsule 3TB network.

    Previously they were configured to be part of a network attached to a cable modem.  Now I have a DSL modem.  I can get the 3TB Time Capsule tower to be recognized by my AirPort Utility but cannot get the older 2TB Time Capsule and Extreme Base Station to be recognised as wifi extensions of the 3TB Wi-Fi Base Station.     This latter base station is set up in Bridge mode and the wifi is switched off on the DSL Modem.     I am trying to recreate a home network (I have created a newly named one) and use the Apple products as the wifi routers, leaving the fibre optic-supplied DSL modem to interface with the internet.
    I would have thought that I should set-up the 3TB Time Capsule Base Station in DHCP network mode, but trying to do so gives me error messages and renders the network inoperative.   Does anyone have any suggestions as to how to get the AirPort utility to recognise the two other devices (Base Stations) as extensions of the main one?    I have tried with RJ45 cabel connections to no avail.

    First, it would be wise to update your computer to OS X Mavericks. It's just a free update, but it really helps your computer.
    Once you've done that, on to the fix.
    In Airport Utility, select the old router and click "edit". Click the Wireless tab. Select Off. Click Update, and wait. During the update, you should use your phone to read this, as you may have no wireless for a time.
    Once the update is done, click the new Time Capsule and click "edit". Select the wireless tab, and change the Network Mode to "Create a Wireless Network". Choose your name, security and password. Click Update. Once the new Time Capsule is plugged in and wired, you should be able to connect to your network from your laptop.
    Back on the old Time Capsule, go to the Wireless Tab and select, "Extend a Wireless Network". Select your network, and click update.
    On the Airport Extreme, do the same as the old Time Capsule.
    You should be done! Now, you can move your old Time Capsule somewhere else as use it as an extention of your network. And the same with the Airport Extreme. Enjoy your 5TB of network storage!

  • Trying to reconnect airport express to time machine but express not showing up in base station.  unfortunately clicked forgot in airport utility and express no longer shows up.  how to reconnect?

    trying to reconnect airport express to time machine but express not showing up in base station.  unfortunately clicked forgot in airport utility and express no longer shows up.  how to reconnect?

    I would recommend setting the wireless encryption on the AirPort Express BEFORE configuring it for the AirPort Extreme in this case. This issue also comes up often when configuring AirPorts into a WDS.
    If setting up security in my recommend order does not work, temporarily connect the Express by Ethernet to the Extreme; make the security changes, and then, move the Express back to the desired location.

  • I had to reformat my OSX 10.5.8 and i can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help

    I had to reformat my OSX 10.5.8 and I can't restore my emails from my time machine backup from an external hard drive - only the latest (post backup) time machine back ups are available to restore. Please can any help? I can find the mail folder in my libraries, but the Restore Button is grayed out

    OSX treats the reformatted drive as a different one; it's the same as replacing it, and the old one is no longer connected.
    See #E3 in  Time Machine - Troubleshooting to see and restore from the "old" drive.
    And, you may not want to restore via the Finder; see the blue box in #15 of  Time Machine - Frequently Asked Questions.

Maybe you are looking for

  • Documentation on SAP DMS

    Hello, Can anybody help me finding SAP or other documentation related with DMS (Document Management System)? Thanks, Regards, Ana

  • Message: "The product distribution not could file verified"

    when I try to buy Mountain Lion appears a message: "The product distribution not could file verified. It may be damaged or not was signed" I use Lion 7.4, MabBook 2010.

  • When is the new ipod touch coming out in united states

    when is the new ipod touch coming out in the united states

  • Result Analysis..... KAKK

    hi All, I am running the KAKK  and i getting wrong calculations... I have created the purcahse order with 2 line items in SD.... For the first line item is 1 stock and            Second line item also with 1 stock... I have also done the Delivery and

  • Question Concerning Upgrading Photoshop elements

    I just purchased an Epson Perfection V500 Photo Scanner. I came with Photoshop Elements 9. The install went fine and I have applied any outstanding updates (on my IMAC running LION). How do I get an upgrade to Photoshop Elements 10 (upgrade price) or