Can't connect my iphone to access point

I have access point without internet connect. I can`t connected to this access point. used to be fine on version IOS 3.1

Ok, so in had to do this to my iPad because it crashed. if you are okat restoring your phone, you need to put it into dfu mode.
1 Hold both lock and home button until screen goes dark
2 once I'd does, not immidietly but a little bit after (don't wait to long because it will restart) let go of the power button (still holding the home button)
3 hold old that for about 10 secs. Your phone screen will be black
4 plug into iTunes.  iTunes will detect it and say "iphone in recovery mode" just press restore and if you have a backup, use that
When I first learned how to do this, it took me a few tries but it works really well and it is a nice thing to know how to do

Similar Messages

  • G4  (10.4.11) airport (9.52) wifi connectivity issue w WPA access point

    I am struggling to resolve a wi-fi connectivity issue between a G4 imac with airport card and a netgear wireless-n access point.
    The set up is as follows - the broadband comes into a Netgear router (DG834Gv5)which my Intel imac connects wirelessly to. Two daughter's den is away downstairs so I run an ethernet cable from the main netgear router to a netgear Pro-safe wireless access point (WNAP210) as an extender (we live on a houseboat so there are metal bulkheads and the like inbetween.
    In the den older daughters G5 wirelessly connects to the Netgear access point easily through a WPA-PSK connection.
    Younger daughters G4 running 10.4.11, with original airport card running firmware 9.52 (airport admin utility 4.2) refuses with the 'wrong password' error (it isn't - I have checked 50x) or sometimes just 'there was an error joining'.
    It can see the network strongly (the airport menubar icon goes full, then cuts, then flashes on, then drops) but refuses any traffic.
    This G4 can however connect, weakly, with my upstairs router which is also WPA-PSK protected (same password)!
    I have read all the forums on this and despite some non-expert posts muddling the issue I believe that this SHOULD be possible. Not WPA2 I know but basic WPA.
    In addition the options in the netgear extender are b&g (like upstairs which works), g or n. So I have selected b&g - no difference.
    Currently I have had to set a separate channel for her and leave it unsecured which isn't a long term option (I am just hoping that even the cleverest war-driver cant sneak in through the extender, back up to the traffic between my Intel and the main router !!?)
    Can anyone suggest what I might be missing in the conjuration (sic, ahem) configuration settings either on the G4 or the Netgear box ?
    Is it enough to turn the broadcasting of the open channel name off and so render it invisible ?
    Thanks in advance for any expert person's attention

    hi kathryn
    did it have to be the Telekom, by all means??
    anyway, first of all a link to a video where a german comedian writes a letter to steve jobs demanding he chose any carrier but the DTAG for the iPhone distribution in germany - really funny!
    http://bit.ly/4B4OdQ
    OK, I´m currently downloading the speedport manual from their website and will look through it, in order to see if there´s something in there..
    as a first guess I´d try looking at the wireless prefs of that speedport box. I guess it supports by default 802.11a/b/g, whereas the G4 only does 802.11b (the "normal" airport). Try selecting only the 802.11b portion from the speedport (that makes networking somewhat slower for airport express computers, but shoudn´t be a problem since it´s still at least as fast as basic DSL service (11MBit vs 2 or 6 MBit)
    cheers
    Matt
    (german in spain)

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • Access Connections 5.61 - Which Access Point am I on?

    I have 3 access points in my area (a mobility center), and it appears only one of them is working. When I go near that one I can get connected but when I logoff and walk near the other two, nothing. I see all 3 listed at 100%, but is there a way to specifically connect to one access point, as it appears to always choose the closest (whether it works or not). I am using Access Connections 5.61. I just noticed there is a field where I can put the preferred MAC address in, but that secion is greyed out. Can I at least determine which access point I am connected through when I do get connected? Thanks in advance.

    Hi,
    You can do it in the way, that you configure 3 different wifi connection for each AP and then you configre the on, that you want to use to be always the prefered using following method:
    in this situation please configure AC in following way:
    - open Ac->Tools->Location Switching-> in the screen make sure, that the location switching in enabled and the key point is, that you specify the correct Wifi AP in the "Preferred WLAN profile".
    Let me know, if you have reached to this situation and cold configure it in the correct way.
    Cheers

  • How can i connect my iphone to a new itunes library without losing my contacts and photos ?

    how can i connect my iphone to a new itunes library without losing my contacts and photos ?

    Is the new iTunes library on a different computer, or the same computer?
    Are you concerned about photos that you have taken with the iPhone in the Camera Roll, or photos you have synced to the iPhone from your computer?
    Contacts should be configured to sync with an app on your computer. You set this up in iTunes on the Info tab with the iPhone connected. You will not lose any contacts if the app on your computer has at least one contact.

  • I have an old g5 mac and can't connect my iPhone 4 or my ipad3 to iTunes to be able to update its telling me I need a better version of iTunes but when I download the version my mac can't take the upload what can I do it's my first mac and need help.

    I have been given a mac g5 old one and I can't connect my iPhone 4 and ipad3 to iTunes to be able to downLoad updates I have downloaded the version of iTunes but my mac won't allow it what can I do need help.

    You need to purchase and install a Mac OS X 10.5 DVD; these are available from sites such as Amazon or eBay.
    (69706)

  • Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5

    Since the new iTunes update 11.3, right after that I couldn't connect my iPod nano 7th G to iTunes. It kept showing me that it couldn't find my ipod, that I had to reinstall iTunes. I did that and still. And now I can't connect my iPhone 5 to iTunes to sync my music. Can anyone please help me ?

    Hey zoelevi_13,
    Here is an article that will help you troubleshoot this issue with your devices not being recognized by your computer:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • I purchased a new router and now can't connect my Iphone 4S to it.  All my other devices work fine.  How do I get the phone to connect.  It finds the router but wants IP address: CHCP/BootP/STATIC.  I am confused!!

    I purchased a new router and can not connect my IPHONE 4S to it.  All my other devices connect fine including my IPAD.  HELP!  I am not a techie!! I am a newbie

    My guess is that when you see the router on your phone, you press the blue arrow on the right - thats why you see all the IP stuff.   Don't press the blue arrow.  Press further to the left. You should be prompted for a password then.

  • TS1538 I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

    I have tried everything but I can't connect my iphone to my laptop. It says that apple mobile device failed to be installed. I have read everything on the internet and did everything but still am facing the same problem. Can you please help me.

    Again without stating the trouble shooting steps you have taken, its hard to direct you with any information.
    Try a different port on the computer.
    Does the iphone beep when u plug it up. ?
    Plug iphone into computer and give it 3 to 4 minutes to see if it connects and is running slow.,
    Delete the apple mobile device from your computer.
    Upgrade itunes to newest version.
    Is you USB cord defective ?
    Any USB 3.0 on your system ? .
    Delete or Disable  any antivirus program on your computer ?
    I will tell u the problem is your computer not the phone.
    We could do this for hours.

  • I can't connect my iphone to my ipad 4 hotspot .. can any one help me ?

    before some days i bought ipad 4 wifi+LTE and till now i can't connect my iphone with ipad hotspot when i enter the passward my iphone can't connect so there is any way to make the connection ?

    Troubleshooting Personal Hotspot
    http://support.apple.com/kb/TS2756

  • HT204023 can I connect my iPhone 3G hotspot to my iPad2 using an iPhone to iPad cable?

    can I connect my iPhone 3G hotspot to my iPad2 using an iPhone to iPad cable?

    An iPhone to iPad cable does not exist. However, you can use your iPhone 3G as a hotspot providing data to your iPad 2. See the following link for more information http://support.apple.com/kb/HT3574

  • HT4061 can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

    can I connect my iphone to my dad's imac and download my pictures to his machine without any issues?

    AnaMusic wrote:
    By Design you can only Sync the phone to One iTunes Library at a time...
    Syncing & importing pics/videos in the camera roll are two entirely different things & have nothing to do with each other.
    You can import iPhone camera roll photos/videos using any computer you want...this has nothing to do with iTunes or syncing.

  • Can I connect my IPhone 4s and my IPad Mini

    Can I connect my IPhone 4s and IPad Mini with a cord

    Also look at Personal Hotspot
    http://support.apple.com/kb/ht4517
    System Requirement
    http://support.apple.com/kb/HT3574
    Trouble-shooting Personal Hotspot
    http://support.apple.com/kb/TS2756

  • TS1373 how can i connect my iphone to computer through usb using windows 8?

    how can i connect my iphone to computer through usb using windows 8?

    If iTunes is installed, you just connect the iPhone to USB.
    http://support.apple.com/kb/HT1386
    You can also sync to iTunes using WiFi.

  • Can I connect my iPhone to my Mac and use the Mac keyboard to write texts

    Can I connect my iPhone to my Mac and use the Mac keyboard to write texts?

    No.
    You can connect a bluetooth keyboard to your iPhone to write texts.

Maybe you are looking for