Can't connect my MacBook Pro (2011) and the TrackPad.
Hi,
The TrackPad isn't recognized. Ran the firmware update - with no success. The TrackPad works fine with my iMac - same distance. Any suggestions?
I'm guessing your Trackpad is paired to your iMac, so it will not be picked up by your MacBook Pro until you dis-assocaited the Trackpad and iMac.
To do this, fire up your iMac with the Trackpad nearby.
open System preferences and select Bluetooth preference pane
Your trackpad should be listed in the bluetooth preferences.
Click the minus button or use the Disconnect item from the bluetooth menu.
Shutdown the iMac.
Try pairing with your MacBook Pro.
Tom
About: Macs http://macs.about.com
Similar Messages
-
I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!
Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen. -
Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor
Can't have sound on my TV when I connect it on my MacBook Pro 2011, with the HDMI adaptor.
On SOUND preferences, I don't have the option for chosing HDMI on the OUTPUT sound.Do you have another HDMI port that you can switch to on the TV? Is the tv source on the matching HDMI port with the volume up? After checking those try the following:
PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
SMC Reset: http://support.apple.com/kb/HT3964 -
HT3500 how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?
how can i connect my macbook pro wirelessly to an hp printer with a asus rt 66acr router?
Firstly, the HP printer must be connected to the ASUS' network. Then, simply connect your MBP to the network and your printer should be addable in Print & Fax in System Preferences.
-
Hi, I have had my MacBook Pro stolen and the police have mentioned about using iCloud to see if I can track it's whereabouts - however I have no idea if I had iCloud on my MacBook or how to track it if I did - can anyone help me please? Thanks
Welcome to the Apple Support Communities
To see if you have iCloud, open http://www.icloud.com and log in with your Apple ID. If you can access to iCloud, you have iCloud. If you get an error message or you can't access, you don't have iCloud. This only works if you only have the Mac (not an iPhone, iPod touch or iPad with iCloud).
Apart from that, "Find my Mac" must be turned on in the Mac in order to track it, so if it wasn't turned on, you won't be able to track it. If it was turned on, the computer must be connected to the Internet to be tracked.
If you can access to iCloud through http://www.icloud.com, choose "Find my iPhone" and look at the Devices list. If your MacBook Pro shows up, "Find my Mac" is turned on, so see if you can track it and tell to the police that it's possible to track your MacBook Pro -
Windows laptops can't connect to Macbook Pro shared internet when WEP security is on
As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.
I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP -
Do I need to buy extra cable for my macbook pro 2011 and cintiq 12WX?
Hi every one,
I want to buy a cintiq 12wx for my macbook pro 2011 and just wondering if i need to buy extra cable to connect them together. Thank you very much for your responses.For output from your MBP, you will need to tap either the DVI, mini display port or Thunderbolt port, depending on its age/model. This will connect to the cintiq 12wx via whatever input configuration that they have. I do not know if they supply and cables or not. If it is a VGA input, there are a multitude of adapters available. OWC or Newegg would be good sources to get the proper cables or adapters.
Ciao. -
As the topic says,
What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
Help me out please.Yes ... minidisplay
But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit. You may ot may not be able to get the cable to *fully seat* with the adapter.
Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections. -
My husband has a macbook pro (2011) and I have an iMac (intel core 2 duo) and an iPhone 4 and iPad 2 but we share one apple id and are unable to use facetime with each other....help
You will have to make a second Apple ID.
-
Hello, I have a Macbook Pro 2011, and put an SSD on it. Yesterday i upgrade to Yosemite and sadly mi trim is not supported .... I really need (and demand) a solution to this, because like i see in the manual of the mac, Iam allowed to install a disk.
Try a Safe Boot to clear the dyld_shared_cache (dynamic loader cache)
SafeBoot http://support.apple.com/kb/HT1564
Safe Boot, which automatically rebuilds this cache (among other things). -
Im based in qatar. can i buy a macbook pro online and have it shipped to a relative in california?
im based in qatar. can i buy a macbook pro online and have it shipped to a relative in california?
I apologize if this is "sticking my nose in where it does not belong", but ...
At least one other poster received a "gift" of an 11 in Macbook Air from a grandmother, but really wanted a 13 in Pro. The question was if the computer could be swapped for the better unit.
I assume the recipient will not be so inapproptiate as to say "wrong computer -- I want a better one!!!", but the recipient may have certain items on their "Wish List". -
HT3053 where can i buy a macbook pro 2011 battery
where can i buy a macbook pro 2011 battery
Apple would be a good place to start...
http://www.apple.com/v20110414080359/support/macbookpro/service/battery/ -
I have a macbook pro mc700, And the scrolling lags or doesn't respond at times. What can I do to fix it?
There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details. -
What is the difference between MacBook pro 2011 and 2012
What is the difference between MacBook pro 2011 and 2012
understanding that at the time of the question, there has not been any Macbook Pro 2012, now it is later and there is.
The difference is:
-CPU being used (2011 models: Sandy Bridge, 2012 models: Ivy Bridge)
-Graphics (2011: intel 3000 + on 15"/17" ATI, 2012: intel 4000 + on 5"/17" nvidia Geforce 650M)
-USB (2011: USB2.0 only, 2012: USB3.0)
-Bluetooth (2011. 2.1 + EDR, 2012: 4.0)
Ivy Bridge CPUs are smaller and are a little bit more energy-efficient.
Other than that, currently the devices are not much different in respect to performance (Apple's graphics driver performance is known to increase during upgrades, though, so the performance gap may widen up) -
Hello all,
I have a Model - MacBook Pro Laptop and the screen recently turned the colour grey, giving me no visibility or access to the unit.
Has anyone had or seen this problem before? Can it be fixed? I had a repair guy from my local Mac Store take a look at it - he said I needed a whole new screen and top of the computer, but this didn't fix the problem. I took the unit home unrepaired, and a week later it was all of a sudden working fine.
What is happening with my Laptop? Once this happens (grey screen) does it mean that it's going to become a chronic problem?
Please advise....ThanksIt's kind of difficult to diagnosis your problem without a visual clue, because there is a (mostly) software based "gray screen" at boot issue.
But if you got the screen replaced, took it home and now it works, why the repair shop didn't get it working before it left the store is beyond me.
Unless the repair shop is a authorized apple reseller/repair, I wouldn't have taken it to them, and of you did, they should have fixed the issue right away.
Maybe you are looking for
-
'''bold text'''When I click the little down arrow at the end of the address line, I get a long list of sites I visted. How do I get rid of them. I went to help, but i could not make heads or tails of what I was supposed to do. The instructions were c
-
Why can't I copy files from my external hard drive - error code -50.
I sm trying to back up an external hard drive to a network drive. Some files copy but not all;. SOmetimes a folder seems to have copied but then I see that most of the files inside have not. And sometimes I just get 'An unexpected error has occurre
-
Mini 4gb won't charge,beeping disconnected it while it said do not disconn
I was charging my Mini 4gb and for some reason my vista computer Itunes started not to recongnise the IPOD. Itunes started to lock up so I had to disconnect it and did the bad thing I did it while it was saying do not disconnect. What did I mess up c
-
Hi, I am looking at an XML file/feed, and within it there are paragraphs and page breaks (<para>, ). When I'm extracting the data into a varchar2 field, i want to preserve the paragraph/break structure... e.g. SELECT text_col FROM XMLTABLE('/'
-
HT2731 do not know the answers to my security questions
do not know the answers to my security questions, do not remember ever setting them up