Can't connect N73 to PC over bluetooth

I can't connect N73 to PC over bluetooth with new Nokia PC Suite v6.84.10.4, I get this message "Cannot use the connection type. Check that all the needed hardware,software and drivers are available". This happened after I instaled new version of PC Suite and the patch to v6.84 didn't help.

I think the problem is in bluesoleil software It looks like PC Suit does not work with latest IVT Bluesoleil version 3.2.2.8. I tried with and witout patch and I even installed older version of PC Suite that worked before with older version of bluesoleil....

Similar Messages

Updated to 5.0.1 and can't connect to my Audi over Bluetooth - help?

Updated to iOS 5.0.1 this afternoon to help with battery life. Now incoming and outgoing calls will shut off my car radio and display call information on my car display, but the sound will not come through the car speakers. I tried deleting the connection ("forget device") and then reestablishing it - no luck. Anybody else have similar experience and any tips?

I fixed mine. After hours of struggle!!!
I turned off Siri from settings. I deleted bluetooth pairing with my car ("forget this device"). I re-established bluetooth connection. I turned Siri back on. All fine (so far).
If this works for the rest of you kindly pass it along to one or two of the other 1000 posts on this issue. People are very frustrated right now. This one is not obvious.
Let me know if it works for you.

HT204387 Can i connect to another ipad using bluetooth?

Can i connect to another ipad using bluetooth?

Depending on what you want to do, the answer may be yes, or no.
If you explain what it is you want to accomplish we may be able to provide a more accurate answer.
Just now that the iPad does not support file transfer over bluetooth directly. Though there are some Apps in the App store that make this possible over different mediums.

I've just updated my iPhone and now I can't connect to my Bose soundlink Bluetooth speaker. Is this due to the update or is it my speaker?

I've just updated my iPhone and now I can't connect to my Bose soundlink Bluetooth speaker. Is this due to the update or is it my speaker?

See this thread: iTunes 12.1 Not Finding iPhone

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting

I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated?

Can't connect to my phone via bluetooth from windows 8.1

I have just bought a Lenovo G50 laptop but it can't find my samsung GT-S5830i via bluetooth.
It will connect to my old laptop though.

You are not able to connect phone to laptop via Bluetooth, to resolve the issue you can try troubleshooting steps given in below link
http://windows.microsoft.com/en-IN/windows-8/why-isnt-windows-finding-device

Can't connect to my printer over network anymore

We upgraded to ox10.9 and since then we can't connect to the brother laser printer connected to our other computer. I went to brother's web site and downloaded the newest driver and now when I click on "add printer" it's not even there. I don't know what to do. I reset my printers and it's still not showing up... only if I connect it via a USB. Before 10.9 I could connect to the printer over bonjour because I was connected on my other lap top..
any ideas?

I figured it out. I had to create a new location on both the Powerbook and G5 and click "Apply Now". Then the PB showed up as a server on the G5.

Can't Connect to Linksys Admin over wireless connection

I just purchased a LinkSys WRT54GX2. Setting up the wireless network with my DSL modem was a breeze. However, I have one problem. I am only able to connect to the router admin from the computer that is connected by cable. My laptop can access the admin if connected by cable. However, when I have it connected wirelessly, it can't connect. Is there a particular setting I have forgotten?

They only recommend doing settings wired. Now, I have usually been able to do whatever I wanted wireless, but I consider that a bonus.

Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Can i connect macbook to imac via bluetooth

I'm trying to connect my macbook pro (new) to my imac (new) via bluetooth. I know I can use thunderbolt connection but would prefer to do it wirelessly if possible.

It's probably cheaper than a cable.
When an AirPlay device is available, this icon will appear in the menu bar at the top:
AirPlay: iOS and Mac

Can I connect my MacBook Pro (with Bluetooth 2.1) to a Bose Sounddock 10

I own a 17 inch MacBook Pro (bought summer 2009) and am interested in buying a new Bose SoundDock 10 with the Bluetooth adapter. Before investing $750 in this sound system, I would like to learn if I can simply pair and connect the MacBook Pro and SoundDock 10 via Bluetooth and play my music from the MacBook Pro thru the SoundDock (such as iTunes and Pandora). I know I can do this from my Driod to the SoundDock. Thank you!

I just purchased the 10 and love it. I don't have the Bluetooth adapter, it was not available when I made my purchase. I was also wondering if my MBP would connect. I can see no reason why the two would not pair.

How can I connect to multiple Macs over the internet?

I have forwarded the ports on my Airport Extreme as follows:
10.0.1.3 being assigned to my Mac Mini.
I also have a MacBook Pro at home I would like access to which has the 10.0.1.4 reserved/assigned. I cannot connect to it because the port forwarding points to the Mac Mini, and it doesn't allow me to create another rule since those ports are already being used by that first entry. How do I go about having the option to connect to either one of the two computers at home when I'm at work using Apple Remote Desktop?

it's not really a confirmed limitation of ARD, ARD is not designed to work outside of a LAN
it's designed for system admins to manage macs remotely while on the same LAN
but you want to use it outside of your LAN, you can by using VPN
VPN gives you remote secure access to your LAN
you will appear to be connected to your LAN
so you can do most things as you would if you were actually on your LAN
ARD does not facilitate a VPN connection
you'd connect using a VPN connection to your LAN then start ARD, ARD will behave just as it would if you were on the LAN
VPN client is built into OSX, system preferences, network, add choose VPN connection
You'd need a VPN server such as OSX server on your LAN
and configure any firewalls, routers etc to allow incoming VPN to connect to your server
You'd also need either a fixed external IP address and external domain name or use dynamic DNS setup
you could also try logmein

How can I connect to Oracle 10G over ipv6?

Redhat4.4+oracle 10.2
I have a ipv6 address 2001:250:3000:1::1:1,
and defined in /etc/hosts
2001:250:3000:1::1:1 host-ipv6
when I connect to database using ipv6 address or ipv6 network-name,I get the messge :
ERROR:
ORA-12154: TNS:could not resolve service name.
How can I do ? Please!

Short answer: Not till 11g.
Long answer: See MetaLink Doc ID 362956.1.
-Mark

Can't connect MacBook to PowerMac over Airport network

PowerMac G4 DP 1 GHZ, Mac OSX 10.5.8
MacBook Core 2 Duo 2 GHz, Mac OSX 10.6.2
When I try to "Connect As", nothing happens. Oddly, I can share the screen of my PowerMac on my MacBook with no trouble. I have File Sharing active on both. This only happened when I updated to Snow Leopard on my MacBook. Unfortunately, my aging G4 PowerMac won't support Snow Leopard.

Interestingly (or maybe not so interestingly) I have no trouble using my PowerMac G4 to connect to the MacBook. It's just a one-way issue with Snow Leopard not making contact with old Leopard. To further check the connection between the two computers, I changed the name of my PowerMac in it's Sharing Preferences and the new name immediately appeared on the side panel of a Finder window on the MacBook.
I use the PowerMac as a central filing system so this connectivity has always been a huge convenience for me. Am I stuck hoping a future Snow Leopard update will solve this?

I can't connect my iphone 4 via bluetooth with my car phone

I cant connect my iphone via bluetooth with my car phone. Bluetooth is switched on on the iphone and the car phone says ready for bluetooth telephony yet the phone just keeps on searching without connecting? Any ideas as Apple phone support doesn't start until 9am (not very accommodating for a company whose equipment runs 24/7)

Car phone?
You are trying to connect your iphone to another phone?

Can't connect N73 to PC over bluetooth

Similar Messages

Maybe you are looking for