Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Hi, I'm on a Mac OS. I just upgraded my wireless network to use an airport extreme. I have a verizon fios router - same as I had when it used to connect. The only change was adding the airport extreme. Now, the officejet 7410 all-in-one will not connect to the wireless connect. It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do. It used to ask me for the network password. I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error. One time it never gave me an error and seemed like it had worked, but was not connected. It just gave up.
My configuration page indicates offline with no active connection and wireless status disconnected.
I restarted everything with no change. I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
Also, as a separate issue but related. In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work. That created another problem in that now it seems that HP no longer supports a driver for this printer. Is that even possible? It's not that old. It says it does not exist on the software update. Please help!

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Connecting Printer to a new Wireless network (changed network provider)

I have recently changed broadband provider and I am struggling to connect my printer (HP Deskjet 3050A All in One Printer) to my new wireless network.
I have clicked on HP within programs and tried to set up the printer but my laptop is not recgonising that the printer is connected via the cable so its not picking up the printer in order for me to set it up as a new device.
Help please??

jwatson84
Welcome to the HP Community Forum.
The easiest way to deal with this may be to install (reinstall) the Full Feature Software for the printer onto your computer.
The installation procedure includes a connection process that might resolve the issue for you without adding any more stress to the situation.
Along with the basic instructions and install videos, you can find lots of helpful Troubleshooting / Howto help at the printer's website support pages.
TIP: You do want to disconnect the USB cable from the printer before you install / reinstall the software.
General Instructions to Install the Printer Software
Reminder:
In most cases, the Solution Center has been replaced by the Printer Assistant.
The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
Windows Operating System:
Create Restore Point: Create a Restore Point – Win7 OR Create a restore point Win8
Open HP Drivers & Downloads
Enter your Printer Model information
Select your Printer from the “Results” list
OR
Open HP Deskjet 3050A e-All-in-One Printer series - J611
Select your Printer from the “Results” list
Enter your Operating System in the Drop-down menu
Click NEXT and Scroll down
Look for category Driver - Product Installation Software
Select the Basic Driver, e-print, or Full Feature Software
Save the *.exe installation package(s) on your computer
The file(s) will likely save to the "Downloads “folder.
Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
NOTES:
Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
Scroll the video list back and forth until you find the video that most closely matches your situation.
If using a USB connection: Download and install the driver software before connecting a USB cable.
Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
After the initial installation is complete and working, check / install Category - Update
There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer. Be sure to take an extended look at what is available. Bookmark the page.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Cannot find instructions on how to connect printer to a new wireless network.

HP 4500 series was connected to my wireless network successfully for a year. Upon moving and obtaining new wireless network I cannot find instructions for changing wireless network for printer to recognize.

Hi,
Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Can I connect a Macbook to a wireless network for PCs?

I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
The solution is to plug directly to the router with an ethernet cable and it always works.
The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

Connecting officejet j6480 to new wireless router

We have an officejet j6480 all in one and we recently changed wireless routers and now the computers cant find the wireless printer. How do we get the computers to recognize the printer or visa versa. Thank you
This question was solved.
View Solution.

The printer can be associated with the new router by using the wireless setup wizard. Press the setup button and navigate to network and then the wireless setup wizard. You have to know the SSID of the new router and also any security settings.
Another method is to use the software CD on the computer:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01311135&tmp_task=setupCategory&lc=en&dlc=en&cc...
Have you setup or changed the default SSID and security settings on the new router?
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Can't Connect Photosmart 7510 Printer to Wireless Network

This printer isn't new, but it's new for me (my mother gave it to me). However, I'm trying to set it up, and I can't get it to connect to a wireless network. When I go into the Wireless Network Setup on the printer, no networks are listed (even though several should be listed, mainly our home network). I tried entering the network information (name & password) manually, and it still didn't work. I've downloaded drivers and all, but I can't complete anything because while the printer is powered on, it's offline. I don't know if the drivers just don't work because I upgraded to Yosemite within the past few weeks (and the drivers are for the OS prior to that one), or what. I can't even begin printing because I'm dealing with this nonsense...

Did everything you said to do, and still had the same issue. The Wireless Network Test results say the following: WirelessWireless Working - FAILSignal Quality - Not Run ConnectivityConnected - Not RunDisconnect count total - 0Disconnect count (last hour) - 0Disconnect count (last 24 hours) - 0 NetworkNetwork Name (SSID) Found - Not RunOther networks detected matching your network name (SSID) - NoWireless Networks Detected - 0 SettingsPrinter Settings Consistent with Wireless Router Settings - Not RunNo Filtering - Not RunChannel - Not RunSecurity - Not Run

Can i connect the printer to a wireless network and a usb computer conneconnection at the same time

Can I connect my Officejet Pro 8600 by Usb and wireless at the same time, I have a very slow Network at this time.

Hello gilldenc
To answer you question yes. You can have one computer attached via USB and to a wireless router at the same time. What router are you using? Is it your internet connection that is slow? Usually your internal home network is much faster than your internet speed.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

WRT110 Can't connect MAC and PC to wireless network at the same time.

I installed a WRT110 router on my son-in-law's MAC sometime back and at the time configured it to have the MAC connected via Ethernet. My PC laptop worked fine with it in the wireless mode. Recently we changed the MAC to wireless newtworking and removed the Ehthernet connection. Now if the MAC connects to the wireless network first and then I attempt to connect with my PC laptop the PC cannot find the network and the MAC loses connection. If I shut my PC down the MAC will not find the network until it is put to sleep and reawakened. If the MAC is put to sleep my PC wil immediately find the network. If I first connect my PC and then awaken the MAC both work fine. I've checked all of the router's setup settings and they seem to be OK. I am not MAC savvy and my son-in-law is a neophyte at computers so we are really helpless when something doesn't work. Help will be appreciated.

I tried this setup change after reading another similar post. It didn't help. One thing I had wrong in the first post is that neither computer will connect to the wireless net after we experience the wireless failures until both are turned off, at least that is what happened after making the suggested changes. Is this a WRT110 issue? Seems there are quite a few posts similar to mine.
Bo2

Can't connect to internet with new wireless n "Extreme" modem

I've had a D-Link DI-604 router for about 4 years-- and wanted to go wireless with an Apple Extreme but first have borrowed my neighbor's D-Link DIR-635 to just see if this will work in my brick house etc. (3 stories, lots of cement and brick...)
Well I get as far as the 192.168.0.1 and then "clone" my MAC address (nothing to do with a Macintosh that...). Note: I was using the same computer to connect to the internet as I previously had used with the D-Link DI-604.
I also give a manual (easy-to-remember) 5-letter password to my wireless connection--
But although this "reboots" the modem, it does NOT let me connect to the internet...
So I'm back to my D-Link 604 cable (wired) only...
One thing the set-up asked for is my HOST name. The only thing I see in the Network System Preferences is an ethernet number: 00:16:cb:cd:6c:3e but I don't find a "HOST" name-- and is that really needed? (In Belgium I'm using an ISP provider "VOO")
Any comments really appreciated-- I could actually see a fairly strong signal from the wireless router (I named it "SteveHermee" and I could see strong bands even from the top floor, with router in the basement...)-- but I could never connect to the internet via CABLE (wired) or wireless.
Thanks,
Steve
Friday 14 March 2008

I got other info from others and D-Link directly.

Can't wirelessly connect HP c7280 for home wireless network using A.express

Hey there, I'm hoping someone can help me. I recently purchased a HP C7280 multifunction printer and have had a wired connection with my new iMac. I'd like to connect wireless and am having extraordinary difficulty. I'm using the latest leopard update. HP doesn't seem to offer any clear assistance. so i'm using an airport express that's connected to my router. I set up a wep key 40 bit and am trying to input that information into the printer's wep key password request. It finds my wireless signal named "Airport" and asks me for a wep key, when i enter the wep key which is 6 letters and 2 numbers, the response I get from the printer is
"key must be >5 or 13 characters OR - >10 or 26 length with 0-9 and A-F (hex). I've tried to follow this request but i can't seem to make it connect. this aforementioned message keeps popping up. what must i do? i've even restored the printers network factory default to no avail

The HPc7280 printer seems to be notoriously buggy. Get the new updated driver from the HP website and try to reinstall from scratch. Make sure you delete the previous driver version, because it might be seeing that it was a wired connection. The HP cannot be set as a default printer on Vista machines, it has to be chosen as a printer. After many hours of setup, our HP is finally working seemlessly with our Macs and PC.

Can't connect Airport Express to existing wireless network!

I just got my new A Express. i try to wirelessly join an my existing network but when it restarts it doesn't see the device. It's i'm trying to set it up so that I can use it as a wireless printer connection for my two macbooks, but all i end up with is the flashing amber light. I've tried a hard reset and that's clearly not solving the problem.
i'd welcome some help as well.

for some reason i had a problem with my airport in my laptop and it couldnt find networks that are hidden.. so that might be the problem the encryption.

Can't connect to my company's wireless network after 10.6

I was connected when I upgraded, but as soon as it restarted I can't re-connect, or I do get connected and it says "No IP Address".
The network is a WPA network. I've removed it from the list of saved networks, deleted the com.apple.airport pref file and rebooted but it is not picking up the settings for the network correctly. When I change them to what I think are correct it still doesn't work.
Also, while in the Network pref pane It added the network as a 802.1x network, but when I click connect it just hangs.
A couple times it has connected but about 10 sec later an "!" appears over the indicator and then it keeps disconnecting/reconnecting.
Any ideas?

Yup, I am having the same problem, I just assume go back to regular Leapord but that means a clean install and I don't really care to do that. The solutions seem rediculous, just wait and meaybe it will work after an hour? Really? Or restart my router, tried that and nothing. Changed the security to nothing and I still couldn't connect. This is redicuolous, Thanks Apple for your attempts to be like Microsoft and put out a crap product. To me, this is unacceptable. Beta testing should have identified the problem and they should have fixed it before release. Now, apparently, there are a bunch of users who have airport issues. If anyone has a real solution, please provide it, otherwise, Apple needs to get their, you-know-what together and fix the problem asap.

I have changed to new computer and can`t sync ipad music to new library how do i unsync from old one don`t want to loose photo`s and music

when i sync my ipad to my new computer, apple tells me it is synced to a different computer and can only have one, the old computer has died, what can i do i don`t want to loose all my music, as some of it is not recoverable, hope you can help?

Your old computer has died, but surely, since it contained nonrecoverable music, you've made a backup.
Simply move the contents of the iTunes folder in your computer's backup to the iTunes folder on your new computer. You should then be good to go.

Can't Connect AirPort Express to existing WPA network

I just bought an AirPort Express and I can't connect it to my existing Wireless network where I use WPA based security.
I've both tried to use the Configuration guide and done it manually with the Admin tool but it just will not connect to my Wireless network.
Less of changing form WPA-PSk to WEP128 I think I have tried "everything".
Any ideas?

Can you changed your router to use WPA:TKIP as opposed to WPA:AES?
When I changed my router to WPA:TKIP, my airport express connected, but with AES it doesn't!
This is not good, since according to Wikipedia, AES is superior and considered part of WPA2, which Apple claim they support (and yes I am using firmware V6.3)!
Hope this helps!

Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Similar Messages

Maybe you are looking for