Can 't connect old iMac to new Mac Mini

I'm trying to connect an older iMac (450MHz, cherry red OS 9.2.1) to a new Mac Mini (OS X 10.4.3).
I don't have a Frewire cable, so I'm trying to do it with an ethernet router. I seem to be doing it incorrectly. File Sharing is turned on for the iMac. I have set TCP/IP to configure with DHCP, but when I try doing Connect to Server from the Mini, it can't see the iMac. What could be wrong?
After I tried DCHP, I tried configuring manually. I input the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini. Still no luck.
Now what?

I don't think you even need a router for those Macs… someone please confirm or correct me, and I think the Mini has an autosensing socket that will let you talk directly to another ethernet device, in this case the iMac…
That aside, when you're not using DHCP please specify exactly what you've put in IP Address, Subnet Mask, Router, DNS Servers and Search Domains on both Macs, and do they both have AppleTalk on?
"the router's IP address, the correct subnet mask, and an invented IP for the iMac, making it one integer larger than the Mini…" is only two IP addresses and this needs one each for the Macs and a third for the router… The router probably has a factory default of either 10.0.0.2 or 192.168.1.2, yes? In that case the Macs want to be x.x.x.3 and x.x.x.4
Then, did you literally mean "Connect to Server from the Mini, it can't see the iMac…" It won't, unless you either enter the iMac's Server Address or manually Browse…

Similar Messages

  • Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Can i connect my iMac to a mac mini (wirelessly) and control the mac mini display on my TV?

    Look up "screen sharing" in help
    You can control your mini (which I am assuming you are hooking to your TV) complete from your iMac.
    After you set up screen sharing, you can go to the finder, under the "go" menu choose "Connect to server" and then browse.  Choose your mac mini's name, and look for the "Screen Sharing" button.
    Choose Apple menu > System Preferences, and then click Sharing.
    Select the Screen Sharing checkbox.
    To specify who can share your screen, select one of the following:
    All users:
    Select this if you want to allow any user with a user account on your computer to share your screen.
    Only these users:
    Select this if you want to restrict screen sharing to specific users.Click Add at the bottom of the Users list and select a user from Users & Groups (accounts you have set up in Users & Groups preferences), Network Users (users on your network), or your Address Book. Or click New Person and enter a name and password to create a sharing account. Then select that user from the list, and then click Select.
    Click Computer Settings and set the following options:
    Anyone may request permission to control screen:
    Select this to allow anyone on your network to request to share your screen.
    VNC viewers may control screen with password:
    Select this and enter a password that VNC viewer applications can enter in order to control your screen.It’s recommended that you not set a password if you only share this computer’s screen using the built-in screen sharing viewer in Mac OS X.

  • Can I connect  my iMac to my mac mini??

    I have the new 27 inch imac with thunderbolt, and I want to connect it to my new mac mini in my media closet. I was windering if there is a way to do this. The purpose of my mac mini is strictly as a media server, and all of my work and media are done on my imac and stored on external storage devices in my media closet. I want to be able to share my media and applications directly with the mac mini. The only monitor I have for the mac mini is the iMac itself. Can I not run the mac mini on the iMac??

    you should be able to use the iMac's screen (27" model) with another computer, using DisplayPort.
    I'm not sure what you mean by "sharing applications", that's not usually possible.

  • Restoring a time machine backup from an old iMac to new Mac mini

    I am considering purchasing a Mac Mini.  I currently have an iMac (2007) model.  I would like to backup/transfer the apps from one to the other.  Is this possible?  I've been using the time machine function which has been backing up my iMac since day one to an external 1 TByte drive. If I can do this, what all info gets backed up?  Will this also restore my e-mails and documents?  I'm new to restoring on a Mac and want to avoid losing apps and having to reload everything piece meal.  I appreciate any advice.
    Patrick C.

    Actually, you can transfer just about everything via either Target Disk mode or the Time Machine backup database.  The effect would be the same.  The System Installation procedure will ask you if you want to do that.   Alternatively, you can launch Migration Assistant to do that.   It's remarkably complete, including apps and serial numbers and passwords.  A few things need to be done manually afterwards, of course, but not many.
    Keep your iMac around for a few weeks in case something you need turns up later not to have been transferred.
    Unrelated Note: DO NOT try to copy the Time Machine database from one drive to another.  The database is composed of non-ordinary files and the procedure will take weeks.
    --Gil

  • Can I connect multiple displays using a mac mini

    Can I connect 2 displays using the mac mini? If so, are there any accessories that I need? Are there certain monitors or connections that I should use?

    Hello,
    Assuming this is a 2012 Mini...
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html
    If you need more...
    http://eshop.macsales.com/item/NewerTech/VIDU3HDMIDV/
    http://eshop.macsales.com/item/NewerTech/VIDU2DVIA/

  • Can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    can i connect my ipad to a mac mini, and also use this ipad as a display? has somebdy ever try this?

    Investigate the Air Display App to see if it will do the job for you.

  • Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Are you following these instructions?
    http://support.apple.com/kb/ht4796
    Have yo tired by connecting both to same network vice direct ethernet connection?
    There is no direct USB connection

  • If I have an old disk with iWork 08, how can I download it on my new Mac Mini?

    My new mac mini doesn't have a disk drive, so I'm not sure what to do. Will it still work on Mountain Lion?

    You can certainly try disk sharing.
    Don't you have a Flash drive or external Hard Drive? That would be the simplest.
    The DVD is not crucial to the installation, only the installer on it. I keep mine on a dedicated installer passport HDD along with all my other software, their serial numbers and purchase info and the updates to those.
    Peter

  • Help! Can't install SSD in my new Mac Mini Server (2012)

    Previously I've purcahsed Mac Mini servers and removed one of the two drives, replacing it with an OWC SSD. The hardware change was not hard to do and resulted in incredibly good computers for my employees to use which allowed us to retire several old, slow and abandoned-by-Apple Mac Pros. There were no issues with reformatting the computers after they had SSDs put in.
    Today I took delivery of a new Mac Mini server, and started to do the same thing, removing the top HDD and sliding in my SSD, since I have many of them around. Unfortunately, the OS would NOT let me format the disks separately or remove the RAID. The volumes (the original 1 TB that was inside and my 480GB SSD) were both colored red when I booted into Internet Restore mode and ran Disk Util, something I've never seen before, and all it would do was say "there was a problem with your disk, would you like to revert it to a working state?" which in this case means Disk Util forcing my drives back into a RAID whether I want them that way or not. (At one point it fused my SSD and the 1TB drive into a single logical drive that had the correct size but didn't show separate sections, and couldn't be de-RAIDED at all, even when I connected to another computer with the Mac Mini in Firewire target mode.)
    I gave up and put a 240 SSD in the lower bay, resulting in a 760GB RAID of two mismatched SSD sizes, which isn't what I wanted but I guess it will do. So far it seems to be working.
    My question is, why in the heck is Apple forcing me to run my computers as a RAID and/or not letting me break the system into one hard drive and one RAID, which is what I want? (Having the backup disk right inside the computer is very handy.)  Is this some feature to keep us from "making our own" Fusion drives? If Apple is deciding we can't hack or do anything interesting with Mac Minis, this will the last one I purchase, and I'm sure there will be others who do the same.
    Since replacing one HDD with an SDD is likely to be the most popular mode imaginable for Mac Minis, can anyone tell me if they got a similar setup to work, and if so what did you do? Can you post the steps here for others who will be in this situation?

    I'm not sure how or what is different between the Standard 2012 Mac Mini and the 2012 Server...? However it looks like your Server also uses Fusion like or similar to the regular Mac Mini's.
    "The version of Disk Utility that comes with Fusion Drive is unique. Earlier versions of Disk Utility can't be used with a Fusion Drive."
    Have a look at > Mac mini (Late 2012) and iMac (Late 2012): About Fusion Drive
    and > Special Note for Adding an SSD to a 2012 Mac mini. | Other World Computing Blog

  • How can I connect multiple speakers to the Mac Mini?

    Just received and setup up my new Mac Mini (Dual-Core i7, 8GB memory, 750GB disk) with OS Lion.  Still in newbie phase.  I have a set of 3-way Boston Acoustic speakers (w/ subwoofer) from an old Gateway computer.  Is there any way/adapter available to connect them to the Mac Mini in order to improve music played within iTunes.  Appreciate your responses.

    Here's Apple's link to information about scanners that are supported by Mac OS X:
    http://www.apple.com/macosx/upgrade/scanners.html
    -Doug

  • Can I connect my PS3 to my mac mini via HDMI ?

    Hello, I would like to know if I can connect my PS3 to my mac mini via HDMI ?
    I don't have a TV anymore so I really need to know if I can use my mac mini as one.

    Maybe this:
    http://eshop.macsales.com/item/Elgato/10025010/
    But you need OSX 10.7 or later
    and if you have Thrunderbolt connection on your Mini then this maybe:
    http://eshop.macsales.com/item/Blackmagic%20Design/BINTSTBEXT/
    You YOu my be able to Google and find another videi-in adopter for your Mini

  • Can I connect two monitors to a Mac Mini?

    Can I connect two Monitors to a mac mini

    Yes, but how depends on what model of Mini and what kind of monitors.  Early models only had one monitor port.  Later models had a Mini-DVI port and a Mini-Displayport.  Current models have a Mini-Displayport and a HDMI port.  The Mini-DVI and Mini-Displayport can attach VGA or DVI monitors, whereas the HDMI port can't use VGA monitors.
    Beyond that, you can get Matrox's DualHead2Go or a USB->VGA or USB->DVI adapter.  The Matrox product is a bit expensive and the USB adapters are a bit to slow for games and such.  So, again, the answer is "yes", but with limitations

  • How do I connect wirelessly to my new mac mini from my macbook pro

    Hi, I've just bought a new mac mini, its connected to my HDTV via the HDMI cable....it is showing as it should on my tv screen....but my question is: how do I connect to the mac mini via my macbook pro? I want to be able to control the mac mini wirelessly from my laptop, as the mac mini is going to essentially run my home theatre.
    Thanks in advance
    Matt

    Use Remote Desktop
    https://www.apple.com/remotedesktop/
    or by screen sharing
    http://macs.about.com/od/usingyourmac/qt/Mac-Screen-Sharing.htm

  • Can I use Dual Displays with New Mac Mini (HDMI   Thunderbolt)

    Hello Everyone,
    This question may have been asked before... but I just purchased a beautiful new Mac mini and it has an HDMI port in the back and a Thunderbolt port.  I am using a new DELL 23" HDMI monitor that also accepts DVI.   I think I could run another monitor on the Mac Mini, but I don't know which is the best way to go... I purchased a mini-display port to DVI adapter because I heard thunderbolt could accept the mini-display cable.
    1.  Should I purchase the other identical Dell monitor and then run it on Thunderbolt 2 DVI and run it DVI
    2.  Or is there a HDMI splitter that splits the signal into two cables and go that way?
    Any advice would be greatly appreciated  Thanks!

    I just got the mini server and run a 24" LCD off the HDMI port and a 19" off the displayport (adapter to DVI) and it works a treat there's no need for any splitter.

  • I can't install iTunes on my new Mac Mini

    How do I install iTunes on my new Mac Mini?

    Welcome to the Apple Support Communities
    iTunes is preinstalled in OS X. Just open iTunes pressing its icon on Dock. Also, open  > Software Update and install all available updates, to check that you are using the most recent version

Maybe you are looking for

  • IPhoto, sort by date is not a true date/time sort

    In iPhoto, sort by date is not a true date/time sort.  If you have two cameras with there own naming convention iPhoto sorts filename by date separating the two cameras in the view. Is there a way to sort by DATE&TIME ONLY?

  • White screen and will not reset or sync

    i phone 3gs turns on and off with a white screen and also will not sync and i get a apple warning frm itunes whn it is plugged into laptop frm itunes which tells me to try later!!!

  • Install os x

    I was told I could free up several gigs of hard drive space by doing an erase and custom install without the extra languages and drivers, etc. Is this true, and about how long would it take?

  • What is the movement type to post customer return stock to qaulity inspec

    Hi All What is the movement type to post customer return stock to qaulity inspection stock i am doing retuns process when ever i do post goods reciept in the return delivery return stock should automatically go to the quality inspection stock. pls gi

  • Generate trace file for a certain transaction

    Experts, I am trying to generate a trace file for a certain transaction for a period of time. I used tx st03 > transaction profile > double click on transaction and am able to get a list for the day. How do I set the date to generate for the month fo