Can't connect or incomplete connect to internet after updating to 10.5.5!!!

Hi
I am having a problem connecting to the internet since I updated (via Software Update) to 10.5.5. There is not a problem with the house internet connection, because 2 other PC's here are connecting fine. I get full wireless strength, my VPN tunnel works, and my skype works. I just can't get on the internet.
I run diagnostics, and it either tells me it's not working, or it tells me it IS working, but I still can't get a web page to load. I have power cycled all the modem/router/MBP a hundred times. I re-setup my connection, and I also tried setting it up with the ethernet cable directly. Nothing works.
I just ran diagnostics AGAIN, and it tells me my internet connection is working correctly...but when I try to open a web page, I get the error that I am not connected to the internet.
It worked flawlessly before the update. So what do I do? Is this an Apple bug that they are going to fix or can fix?

I am writing just a short message in case Apple mistakenly believed that this problem was solved.
It is quite clear that many other people than the ones in this thread are experiencing the problem. From what they describe, possible candidates are:
http://discussions.apple.com/thread.jspa?threadID=1749468&tstart=15
http://discussions.apple.com/thread.jspa?threadID=1756323&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1752506&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1754653&tstart=0

Similar Messages

  • Apple remote will no longer connect to itunes on my pc after updating to ios5

    my apple remote will not connect to itunes on my pc after updating to ios5 anyone know why.

    Hi Chukwudinma!
    Here is an article that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Cannot longer browse the internet after updated 10.5 to 10.5.8

    cannot longer browse the internet after updated 10.5 to 10.5.8

    Did you repair permissions?
    Did you backup your data prior to installing?
    Are you using any non-Apple routers to connect to the modem?
    Is this with a notebook or a desktop Mac?
    Are there any other Macs with 10.5.8 or newer that can connect?
    Does connecting directly to the modem work via ethernet, or are you on dialup?

  • I can not open Airport utility on my iMac after updating to maverick 10.90.4

    I can not open Airport utility on my iMac after updating to maverick 10.9.4 . Error Message:[You can’t use this version of the application “AirPort Utility.app” with this version of OS X. You have "Airport Utility.app"5.4.2] It also will not allow me to install "airport Utility 6.3. Does anybody has a fix for this?

    Re-run Software Update and see if there is a newer version of Airport Utility. I suspect your router or iMac may be too old to use Airport Utility 6.3 . As a work- around if Software Update does not work then try reading this article and see if the suggested solution help you.
    http://coreyjmahler.com/2013/10/24/airport-utility-5-6-1-on-os-x-10-9-mavericks/

  • How can i get rid of the iTunes logo after updating my iPhone 4 to the iOS 6

    How can I get rid of the iTunes logo after updating my iPhone to iOS 6

    Absolute garbage.
    This abysmal excuse "Always have been built in apps" is irrelevant. NOTHING should be tied to the OS of even
    a phone so tightly that you can't get rid of it. NONE of the apple crap apps do I use, but they use space on MY phone.
    I want the **** things gone.

  • HT5012 Why can't I log onto my online banking after updating my software

    Why can't I log into my online banking after updating my software on iphone5 and ipad

    In this case you would have to add this account in "Settings > Mail, Contacts, Calendars > iCloud" for email, calendars, contacts, reminders etc. After you have finished checking emails, etc. you can delete your account in the same way.

  • HT5622 i can't activate my iPhone 5 on iCloud after update to iOS 7.0.4 pleas help me

    i can't activate my iPhone 5 on iCloud after update to iOS 7.0.4 pleas help me

    rorof wrote:
    i can't activate my iPhone 5 on iCloud
    What does this mean?
    Settings iCloud and add your AppleID.

  • Sony Bridge Can't Connect To Internet After Updating To Mountain Lion

    I've tried multiple times now, to get Sony Bridge to check for updates, but every time I try, I get the following error:
    Cannot Check For Updates (no internet connection)
    I'm on a 2008 iMac, connecting with a Live With Walkman.
    My Mac is online and the problem only occurred after updating the OS to Mountain Lion (10.8).
    Thus far I've tried going into the user library, and have deleted the two Sony folders present in the Application Support folder, but to no success, I still get the same error.
    I'm firing this up regularly to see when ICS is going to drop in Belgium, so I'd be keen to hear of any possibile solutions. Thanks.

    Hello OneManLaptop
    ML came out 3 days ago...There is as of right now no tested version of Bridge for MAc available for it.
    You will need to wait for the Update of the application but right now we can't provide a ETA for it.
    Sorry for the inconvenience that this may cause you.
    Francis.

  • Can't connect to internet after updating new Firmware wrt54g Help please!

    So i just updated my firmware on my wrt54g ver 2 router, went through all the steps it updated successfully after that i hit the reset button and unplugged the router as tehe online instructions said to. Now i can't connect to the interent at all with either of my two wired computers or through the wireless. All the lights on the front of the router are on like the power, internet, and wireless connectivity. Also the the two WAN ports my computers are connected to in the router the lights are on and it's recognising them. But I can't connect to the internet or even see the router on my network settings. Somone suggested to reconfigure the router but when i go to set up new connection my computer doesn't detect the router and also i cant connect to the router using the ip address 192.168.1.1/ since there is no internet connection. Is there a way to get to the router options or a way to revert it to its old firmware. Any help would be much appreciated. I should after updating the firmare the power button is contantly blinking.

    I am having the exact same problem..  I have the same router and same version as well.. I followed the directions and upgraded the firmware. it said update successfull and then I reset it and power cycled it to find that my network no longer works and I cannot access the router..I've looked through all the troubleshooting guides and they do not help..  It says if you can't access the web based page then to use the TFTP  utility to re-flash the router’s firmware but it seems it cannot make a connection to the router..  I've tried to ping it like it says to in the TFTP guide but it does not seem to be able to make a connection to the router..  I tried to access Management Mode to recover the router and resume the loading of the firmware upgrade but I can't get the Management Mode Firmware Upgrade page to open as well..  So what gives?  I followed the directions  but the only thing I seemed to accomplish was to brick my router..   Does anyone have a clue on how to go about fixing this problem?   Any help is appreciated.. 

  • Can't access internet after updating to firmware 7.3.1

    After updating to firmware version 7.3.1, I lost the ability to access the internet. The AEBS thinks it has an internet connection (the light is green), but it does not. I have tried restarting the AEBS and my cable modem router.
    I had the same problem with firmware version 7.2.1, and had to revert to 7.1.1.
    I'd like to find a solution so that I can make use of Airdisk and Time Capsule.

    Same here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
    In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity.

  • No IP Address via DHCP connecting to Cisco WiFi via WPA - after update

    Good Evening,
    We use Cisco Aeronet WiFi devices at work and use WPA security. I was able to successfully connect via my MacBook Pro until an OS update a few weeks ago. Now I can connect and it appears that I authenticate - however I cannot get a valid IP address (just a 169.x.x.x address).
    I can successfully connect to open and WEP networks - but WPA is an issue.
    Is this a known issue?
    I have applied the latest Airport update I believe.

    This is an old issue, I have yet to see a fix. I have the same problem; my MBP assigns its own IP address, and no matter what I do, it will connect to the network but not the internet. Interestingly, when I boot my iBook, which I first did to check settings (the iBook always connected easily) the MBP connected. It does this every time. As soon as the iBook boots, or wakes, the MBP does its thing, gets a valid IP address via DHCP, and connects. Even entering a manual address, will not connect the MBP to the internet. Deleting ports, and locations doesn't help.The MBP has connected on its own about three times out of (say) a hundred. Apple engineers here in Australia, said they'd never heard of the problem. Maybe they are asleep. Bah.

  • USB connection with PC is not working after updating firefox OS 1.3 to 2.0 on my device. How to fix this?

    After updating OS 1.3 to 2.0 usb connection to PC is not working. I am using firefox os device Flame. I cannot share files with my PC. Please help me to fix this problem.

    ''Ralph Daub [[#answer-694088|said]]''
    <blockquote>
    Hi Raiyad Raad,
    I'm sorry to hear that you're having issues when connecting your Firefox OS device to the PC, after updating it from v1.3 to v2.0.
    Please ensure that USB Storage and Media Storage are activated.
    If you are still having issues after activating USB storage and restarting your device, please write back to us with the following information:
    * What is the model of your phone?
    * What is the OS version and Build ID found in the Device Information page? Please visit [https://support.mozilla.org/en-US/kb/how-do-i-find-what-version-firefox-os-i-have this link] if you need help finding the Build ID of your phone.
    * Please describe the steps you took to update your device.
    * Please provide the exact steps to reproduce the issue you are encountering.
    * How often do you encounter this issue?
    Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we have all the necessary information to investigate this behavior.
    - Ralph
    </blockquote>
    I've activated the USB storage and media on the phone. But still it's not working. I'm using T2mobile Flame and my OS version is 2.0. Build ID: 20141016183911
    I've written a blog about how I updated it here: http://raiyadraad.blogspot.com/2015/02/how-to-update-firefox-os-13-to-20-with.html
    I'm having this problem after updating to firefox OS 2.0

  • Why can't I see my contacts in Yahoo7 after updating to the new Yahoo7? I can see them in internet explorer

    I recently updated my yahoo account to the new yahoo7. I now can't see my contacts in my yahoo7 contacts list, but if I open my yahoo7 account using internet explorer I can see them. I have tried updating to the new firefox 5, checking the page style is set to basic (it is), clearing cache, and have even tried updating plug ins.

    I can't see the photos from the iPhoto after upgrading to OS X Yosemite. I did follow the instruction to download the iPhoto Library upgrader. It was shown that the download was successful. However, it is still unable to see the photos.

  • Problems to acces Internet after update to OS X Mountain Lion

    After updating to OS X Mountain Lion I can not acces any web that works with and user and a password. Normal acces to any open site. App store is also not working neither software actualization. Keeps trying to connect until time out message appears.
    Thanks in advance for your help

    If your friend purchased Mountain Lion, have them sign into the App Store using their Apple ID and download it again.
    You can make a bootable USB stick to install using this free program which will do all the work for you.
    Bootable USB Flash Drive – Diskmaker X

  • I can't access mail on my iphone 5 after updating to 8.1.3

    After updating to 8.1.3, I can no longer see my email in mail on my iphone 5 once I click on a message -- I get the heading of the email but the body of the email is blank.  Any suggestions?  I've already tried deleting and reentering my email accounts but the problem persisted.  Thanks!

    Silly question but have you tried restarting your phone? Hold down the sleep/wake button and home button at the same time until you see the Apple logo and then release.

  • How to restore safari icon and internet after updating 3gs to ios6.1

    How do I restore internet function and Safari icon after updating iPhone 3gs to ios 6.1?

    The Safari icon cannot be deleted. Go to Settings > General > Restrictions, verify you didn't turn it off.
    Otherwise try Settings > General > Reset > Reset Home Screen Layout.

Maybe you are looking for