Can't connect PB G4 to linksys wireless router when 64bit is established

Hello-
I have my PB G4 connected (wirelessly) to a linksys wireless router WRTP54G. If I don't have security set on the router, the PB connects. Once I add the security (64bit) and enter the password, the message "There was an error joining the AirPort network” comes up and I can’t connect. I've connected my other laptop to the network (a PC).
Any ideas on how to fix this? Thank you in advance.

Does your router support any other form of encryption? See if this KB article makes any sense to you.
AirPort: Joining an encrypted wireless network
Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
Yang

Similar Messages

My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down. I have to re select the network when restarting or waking the computer up. I think this just started with Lion. My iPod and iPad have no trouble.

My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.

Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.

Can not connect the ipad 2 to wireless router. been working fine but some reason not working now being trying to solve this since 4pm today

Can anyone help can not get my ipad to connect to wireless today. has been working fine but all of a sudden will not connect to Router. I have a kindle and a mobile and both of these will connect to the router wireless but the ipad will not.
Been to my parents with the i pad and this will connect to their wireless router.
Can not think of anything else to try

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Also try this - Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
 Cheers, Tom

Can't connect Coby tablet with Linksys WRVS4400N Router

My new Coby tablet model #MIC1125-4G does not connect to my wireless network which is secured with a WEP key. The tablet connects everywhere else (Starbucks, etc.) and all my computers work in my wireless network. My router is a model #WRVS4400N. So it seems there is nothing wrong with my tablet and there is nothing wrong with my router. Do you know if there is an incompatibility issue?

Try updating the firmware for the router.
~Lyssa

Can AE get in conflict with my wireless router when AE is joining?

The problem is that the sound drops out after about 10-60 seconds. I also loose my Internet connection as well as a yellow light on the AE is starting to blink. After about a minute or so it reconnects automatically, but when I start playing music again the same thing is happening..the sound drops out! Any clue why this is happening? I use WEP secure my wirless network.

Does your router support any other form of encryption? See if this KB article makes any sense to you.
AirPort: Joining an encrypted wireless network
Personally, I have a sneaky suspicion it has to do with the way your ASCII/hexadecimal password is or isn't being converted to something recognisable by the router. I use a Linksys router at home with a hexadecimal password generated from an ASCII passphrase, and that seems to work fine.
Yang

My iPad will no longer connect to my Linksys wireless router. Every other electronic device in our house connects just fine. What can I do?

I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

How do I connect my laptop to my Linksys wireless router through the internal wireless card?

I just purchased a gateway laptop and was trying to hook my Linksys wireless router up to it. Ive gotten it hooked up but only through the secondary device (that catches the signal)... I was wondering if there is anyway that I could make my internal wireless internet card a point or no? Can I only connect it to the USB network adapter or is there really a way to go COMPLETELY wireless? Thank you for your time...

Is your internal wireless card enabled? Go to device manager and make sure it is enabled.
Chuck

HELP! Can't connect on 2 or more wireless connection

I have WRT110 Linksys wireless router. I also have the latest firmware. fw 1.0.04. I have no problems connecting wired connections(2 PCs) and 1 wireless connection. However, when i tried connecting 2 or more wireless connections(3 laptops). All computers gets disconnected. I need to turn off the router again and my computers to get connected but only 2 PCs and 1 wireless laptop... Any help please! I already talked to tech support and no help! We tried to power cycle, reset for 30 secs, remove adapter, cables, etc. and didn't help! Same results! Can't connect on 2 or more wireless connections. We edited the basic wireless setting to WEP/WPA personal, band, channels, still no luck too! Im getting frustrated with this router. PLEASE HELP! I have Time Warner Road Runner cable internet. Thanks in advance!
Message Edited by rhenzhen on 10-02-2008 05:18 AM

Try these settings on Advanced Wireless
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304. and Upload the same firmware on the router once again.

I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have. would love some good tips.

Try this:
Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

HT4972 can't connect to network with linksys e2500

Can't connect to network with linksys E2500. Can anyone help me?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Connecting a cable modem, a linksys wireless router and my MacBook?????

So... My cable modem and MacBook work great when connected with an ethernet cable. How the heck do I hook up and configure my Linksys wireless router with my macbook and the cable modem? This seems like a simple setup, but when I hook it up it doesn't connect me to the internet.
Any help would be awesome!!!!

Darren,
The best advice I can give is to suggest you post in the right discussion group. This is the group for Apple Pages. You want the MacBook group.
-Dennis

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

How can I connect my iPad to my wireless Hp Officejet Pro 8500 A909g ?

How can I connect my iPad to my wireless Hp Officejet 8500 A909g ?

Are you trying to connect the iPad directly to the HP or using your wifi network?
HP published this page that may help:
http://www8.hp.com/us/en/ads/mobility/overview.html?jumpid=va_r11400_eprint
A909 does not show as an AirPrint capable printer:
http://support.hp.com/us-en/document/c02623193
About AirPrint - Apple Support
You may wish to search the AppStore for an app that could help you.

Hp6700 Printer: can't connect to D-Link DI-514 Wireless Router when Broadcast SSID is set to NO.

HP6700 Printer: can't connect to D-Link DI-514 Wireless Router when Router Broadcast SSID is set to NO. My MAC LapTop and HP LapTop both work with the SSID set to NO. If I change the Wireless Router to Broadcast SSID is YES, then the HP6700 Printer can connect to the Wireless Router. I setup the Printer telling it what the SSID and Password were, the same as both of my LapTops, but it never connects, unless I change the Router to broadcast the SSID. Help!
This question was solved.
View Solution.

Did you try updating the firmware on the DI-514?
You can also try setting a static IP on the printer, then assign the printer to the static DHCP list in the router interface.
To give your printer a static IP address:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you will have delete and re-add the printer on your Mac.
Show support by clicking the blue Kudos star in the post that resolved your problem. Doing so will help other forum members find their solutions too.

How can i connect iphone 5 with izon wireless camera?

Hi
How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
What is wrong??????????

I would check if they have some info here
http://steminnovation.com/support
and then I would test it with other phones or a computer to verify that it's not broken

Can't connect PB G4 to linksys wireless router when 64bit is established

Similar Messages

Maybe you are looking for