Can't connect PC to Airport Express

Dear discussions helpers,
After my wife had Vista installed on her Sony Vaio, we can't connect her to our Airport Express to access the internet. We use WPA Personal, password access. Seems she can only connect to it if the network is open, which I don't want to do for obvious reasons. We have an iBook and a Macbook that connect without issues, but even if we enter the password and configure the settings correctly (the set-up assistant is just about the same as the Mac), it won't connect. Now, she let this go for so long, she passed the Geek Squad warranty. I know nothing of PC's, so I can't help. Why she went there is another issue, but the point is: what can you suggest we do to allow her to access my network?

Run AirPort Utility, click on Manual Setup, and then select Access. Change MAC Address Access Control from Not Enabled to Timed Access. Change the default setting by double clicking on it and on the drop down menu change Everyday to No Access. Now hit Done. Now click the + button and either enter your Mac's MAC Address (which can be found under Network Preferences and Advanced and is listed as your AirPort ID) or click this computer which will enter it automatically for you. Add the other computers that connect wirelessly to your Time Capsule (don't worry about ones that are wired) and then hit done. Now not only will other users have to know your password to get on your network but they also have to have a MAC Address that matches the ones that you listed (which means they either have to be one of your computers or have cloned one of your computer's MAC addresses, which is just one more layer of security).

Similar Messages

Can not connect to old airport express

I can not connect to old airport express with new mountian lion and airport utility?

You will need to install AirPort Utility 5.6 on Mountain Lion. This article will tell you how:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
This works for most users, but we cannot guarantee that it will work for you. Up to you to decide if you want to try this unsupported method.

AirPort Express - Can not connect to "extended" AirPort Express

Two trips to the Genius Bar tell me that I should be able to Extend my network from a new AirPort Express (n/g/b) to an older AirPort Express (b/g) using the "extend network feature". The two devices are communicating (both lights are green and the wireless channel will change on the remote device if I change it at the base station), but my MBP Core Duo 15" seems to only be connecting to the AirPort Express Base Station (n/g/b) and not to the Remote "extended" AirPort Express (b/g).
This forum seems to indicate that you can only use WDS between the newer AEX (n) and the older AEX (b/g) but the folks at the Apple Store have told me twice now not to use WDS. They said that as long as the two devices have green lights that it is working, but when I click on the Airport Symbol up in the menu bar w/the Option key it tells me the MAC address of the base station only - and when I get very far from the base station, the signal drops out even though the remote AEX is near by.
I did try setting it up using WDS and that works fine, just very slow.
Anyone know if there's a way to be sure that my MBP connects to the remote (extended) AirPort Express?

This forum seems to indicate that you can only use WDS between the newer AEX (n) and the older AEX (b/g)
This is correct....since the older b/g Express does not even have a setting to "extend a wireless network".
If you require confirmation, open AirPort Utility, select the b/g Express, click Manual Setup
Click the Wireless tab below the row of icons
Now look at the available settings for Wireless Mode.
"Extend a wireless network" is not there.
but the folks at the Apple Store have told me twice now not to use WDS.
They are likely telling you not to use it because the performance on your network will drop dramatically if you do use WDS. Or, they mean well, but they are just wrong on this subject. Here's why:
The only way that you can use an older "g" and newer "n" device together to provide more wireless coverage is to configure both devices for WDS. It's a Catch 22.
WDS operates only at "g" wireless levels. So when you configure the newer "n" Express to operate as part of the WDS (which you must), it becomes a "g" wireless device. You lose any "n" capability on the network
Worse still, every "remote" or "relay" in a WDS setup cuts the bandwidth of the entire network in half...50%. That's huge. In effect, with WDS, you may have a bit more wireless coverage, but you will have a "g" wireless network that operates at half speed.
but when I click on the Airport Symbol w/the Option key it tells me the MAC address of the base station only - and when I get very far from the base station, the signal drops out even though the remote AEX is near by.
The remote AX is not providing any additional wireless coverage.
They said that as long as the two devices have green lights that it is working
Nope, as you can tell by the fact that your "remote" is not providing any additonal wireless coverage.
Anyone know if there's a way to be sure that my MBP connects to the remote (extended) AirPort Express?
Your only option, (unless you add more hardware):
Configure both AX devices to "Participate in a WDS network" setting one up as a "main" and the other a "remote" . The big downside, as mentioned previously, is that you will have a "g" wireless network running at half speed.

My system can not connect with the Airport Express while the signal is very good?

Neither my phone nor my desktop (windows 7) can not make a connection with the Airport Express. The signal keeps flashing amber.
Several specialists have checked but can not solve this problem. Any ideas?

I am in exactly the same boat...

Can't connect to Apple Airport Express wi-fi

Hi folks,
2nd gen iPT, OS is up to date. At my home, it connects to my Airport Express wi-fi network just fine. But at my parents home, it does not. It sees the network, asks for the password, I type it in, and it rejects it saying it cannot connect to the network. I set the network up myself, I know the password, I just can't figure out what the connection problem is. Any ideas? Any typical things that are overlooked? Any glitches that I haven't anticipated (like using one versus another security protocol on my parents' network)?
Thanks,
-- Josh

Is it the same Airport Express that you're physically taking to your parents home and plugging it into their network, or do they have their own Airport Express which you're trying to connect to?
If it's a different Airport Express, I'd compare all the settings in the Airport Utility at your home with all the settings at your parents.
If it's the same Airport Express, maybe you've got some settings in there which are specific to your home network i.e. different IP addresses. Try setting it up for DHCP.
Can other wi-fi devices connect to it, or is it only the iPod touch that's having problems?
Incidentally, I take my Airport Express where-ever I go and frequently connect it to different networks without having to reconfigure it, so if this is what you're trying to do, its certainly possible.

Can't connect with my airport express

When trying to connect to my airport express tool I get the error code 10057, can anybody help??

Try this:
https://discussions.apple.com/thread/3289924
Kind regards,
Jason Havens
Destin, FL, USA

How can i connect my existing airport express to my new time capsule network?

I have an older airport express for wirelessly extending my network in my apartment. I bought a new Time Capsule and my airport express flashes amber and cannot find the time capsule to connect. How do I get them connected?

You can use the USB3 connections for USB2. That's downward compatible. Just runs at USB2 speed.
Just this week apple announced a couple of TB adapters, TB-to-ethernet and TB-to-firewire. But the FW adapter is not at the apple store as yet (at least at the time I am posting this).

I can´t connect the internet - airport express + windows xp pack3

I have a problem to connect the internet in my computer (system Windows XP Pack 3) using Air Port Express. My roommate has a mac pc and everything was easy, but in my case it was not. I tried to use the “Airport setup assistant for windows” and nothing, I tried to update my wireless drivers and nothing. I tried to configure the wireless by hand, because it was not able to find automatically the airport base station. But, maybe I´m using incorrect IP and gateway values. I don´t know what else I can do to solve my problem. Sometimes, the internet symbol is on (when I configure ip value by hand), but when I open firefox or internet explorer … it is not connected.
Oh… please, help-me!
Thanks.
p.s. PC = Acer Aspire 5315, 802.11b/g wlan

I have the same problem. My iMac talks to the Airport Express with no problem, but my PC Laptop (running Windows 7) appears to connect but I can't use the internet - same issue as the first post in this discussion. I'd love to hear from someone who can help. Apple doesn't seem to be able to provide support on this one...

Can't connect to Secure Airport Express Network with my PC Laptop

Hello-
I have a PC laptop with Windows XP and a wireless card that I've used to successfully connect to unsecured Airport Networks many times.
Now I have a Security-Enabled network in my apartment, and I can't figure out how to connect!
When I attempt to connect, it asks me to enter a "Network Key." I've tried using the numbers on the underside of the AirPort Express itself, as well as the password my roommate assigned to the network (which I used to successfully connect with my PowerMac G5). None of these work.
Does anyone have any ideas for me?
Any additional information needed?
THANK YOU!!!
-Darnell from Chicago

What you need is the "Equivalent Network Password" of the AirPort Express Base Station (AX). This Apple Tech article should help: http://docs.info.apple.com/article.html?artnum=106864

Can't connect PS3 to Airport Express Network - please help!

Hello,
This may have been done to death before, but I couldn't find it...
I have an 80GB PS3 that I am trying to connect to the internet wirelessly through my Apple Airport Express.
When I follow the setup procedure on my PS3, it finds the Apple Network, I put in the security key and it all seems to be going OK. However, when I test the internet connection, it fails to find the IP address.
Can anyone help me with this? Please???
Many thanks...

I have fixed it!
Basically, I had wpa2 encryption enabled. I changed the encryption to wep, which then prompted me to enter a 13 digit password, which I did. Fired up the ps3, entered the new 13 digit password and voila! All working beuatifully.
Many thanks for your help!

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can I share my internet with my Ipad and simultaneously connect to a airport express that I use to remotely connect speakers?

Can I share my internet from my Imac with my Ipad and simultaneously connect to a airport express that I use to remotely to connect speakers?
The big problem that I'm having is that when internet sharing via the airport I can not simultaneously connect with my airport express. It would be great to be able to share internet from my Imac so I can be using my Ipad and at the sametime have my wife use the airport express to stream music in a different room. It would be awesome to be able to have the ability to do both. Does anybody know how?

Unless your iMac was made before 2006 (this forum is for old iMacs), you might get better assistance by posting in one of the following forum areas:
AirPort
Using iPad
iMac (Intel)

Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear-) and so on. I guess I can do that using an Airport express connected to the stereo and via airplay

Hi, I`d like to connect my Ipad wirelessly to a stereo to listen to my music from the iTunes library on streaming, but also to movies online, games, Goear…) and so on. I guess I can do that using an Airport express connected to the stereo and via airplay to my Ipad. My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library? I`d appreciate any help. Alex.

My question is, can I listen to all the audio that come out from the ipad (movies online, games, Goear…) or only to the music from iTunes library?
On the iPad you can stream videos, photos, or music from the Video, Photos, Music, and YouTube apps to an Apple TV OR just stream music to an AirPort Express Base Station.

Connected to the Airport Express' Network but Can't Find Express

I've recently been having some trouble with my network, which contains a modem connected to an Airport Express, with my iMac connecting wirelessly to that. My internet connection is getting dropped, and when I open up Airport Utility I can't see my Express. However, from the wireless indicator at the top-right of my screen, I am still connected to the Express' network. When I turn my iMac's Airport on and off, it reconnects to the Express' network (which is constantly at full-strength). I also can't ping the Express.
So, I'm connecting to the Express' network but I can't do anything. After a variable amount of time (5 seconds to half-an-hour), the Express will appear in my Airport Utilities once again and I can surf the net. Does anyone have any thoughts? Is there a way to ping any of the protected wireless-networks that are available, just to see if it's a problem on my iMac's end? Could my Express still be broadcasting its SSID but has shut-down it's networking capability because of an overheating issue?
Thanks.
- Matt
PS. My Airport Express is the 802.11n model.

You may need to re set the AE to factory specs and start all over. Read the manual on a factory re set. Start on page 41 and go through page 42.

I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
CB

Can't connect PC to Airport Express

Similar Messages

Maybe you are looking for