Can't Connect Photosmart 7510 Printer to Wireless Network

This printer isn't new, but it's new for me (my mother gave it to me). However, I'm trying to set it up, and I can't get it to connect to a wireless network. When I go into the Wireless Network Setup on the printer, no networks are listed (even though several should be listed, mainly our home network). I tried entering the network information (name & password) manually, and it still didn't work. I've downloaded drivers and all, but I can't complete anything because while the printer is powered on, it's offline. I don't know if the drivers just don't work because I upgraded to Yosemite within the past few weeks (and the drivers are for the OS prior to that one), or what. I can't even begin printing because I'm dealing with this nonsense...

Did everything you said to do, and still had the same issue. The Wireless Network Test results say the following: WirelessWireless Working - FAILSignal Quality - Not Run ConnectivityConnected - Not RunDisconnect count total - 0Disconnect count (last hour) - 0Disconnect count (last 24 hours) - 0 NetworkNetwork Name (SSID) Found - Not RunOther networks detected matching your network name (SSID) - NoWireless Networks Detected - 0 SettingsPrinter Settings Consistent with Wireless Router Settings - Not RunNo Filtering - Not RunChannel - Not RunSecurity - Not Run

Similar Messages

Can't connect computers to printer (b210) via network because there are "other networks"

I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Can I connect a Macbook to a wireless network for PCs?

I would like to purchase a Macbook but I would like to figure out the extra costs before buying. I currently have a Dell Inspiron 600m notebook that connects to the linksys network in our house, can I connect a Macbook to the same network or is there another package I need to buy?

The other users may know more about this than I and dispute with me, but I can tell you from personal experience that sometimes there are problems. At this very moment, for example, I am at a buddy's house who has a wireless router hooked to his pc and my apple FIRST displayed one internet page and then flaked out on me. SECOND showed an airport signal but could not connect to any sites. THIRD showed no airport signal at all.
The solution is to plug directly to the router with an ethernet cable and it always works.
The other solution is to unplug the router for 30 seconds to reset it everytime you switch between a pc and a mac. The cable company gave me this handy solution which they claim is a constant necessity. BUT I have found it is in fact rarely needed at home where both pc and macs are running. But still sometimes I have to do it.
So if there is some pattern to all of this I cannot find it. But there is no "extra" hardware required, just some occasional software failures.

7525 Wirelessly connected, loses internet connection, will not print from wireless network

Have a 7525 Photosmart printer (approx 7 months in service) that has been working great until now. I had to change the dsl/wireless router over the weekend and now I can't print wirlessly from the network. According to the printer diagnostics, the printer is connected to the network but each time I try to print, the computer being used can't find the printer. Checking the Wireless Network Test Results page, all is fine except there is no internet connection. Restoring the internet connection requires a 're-boot' of the printer, i.e., switching it off and unplugging, after which network printing is restored. However, that only lasts for a very short time, less than 1 minute, then no more network printing.
I think there is something fishy with the IP address. HP Print and Scan Doctor can't find the printer using this address. Typing the IP address into the browser gets an error message that the page cannot be found. That address should lead you to the printer page, but it does not. Changing the router resulted in an IP address change for the printer, but I wasn't even able to manually set the IP address via HP troubleshooting as it required the ability to get to the printer page from the IP address.
I am rambling on, but I have reached my knowledge limit and hope that someone can give me some other suggestions on what to try next. Thanks

Hi Seenders and welcome to the HP Forum,
I understand that you are having connection issues with the printer on the network. I will try my best to help you resolve this issue. In this document for Printer Does Not Maintain Wireless Connection are different solutions that may resolve your connections issues. Once you have the printer up on the network make sure you update the IP Address on your computer.
I hope this information is useful. Let me know how it works out.
Thank you,
I worked on behalf of HP.

Connecting Macbook to printer in wireless network

I recently got a Macbook. I have a pc downstairs that is connected to an HP officejet printer, and one upstairs connected to the same printer via the wireless network. My Macbook uses the same wireless network but I don't know how to find and connect to my home printer. It is already connected to one printer - an unopened one I will use at college. Can I connect to two? I searched via spotlight (I'm new to Macs and finding everything) and it brought me to the printer utility set up thing, but I just can't find the printer even when I tell it to add one. I'd really appreciate it if someone could help me!
Thanks,
Kerry

I recently got a Macbook. I have a pc downstairs that is connected to an HP officejet printer, and one upstairs connected to the same printer via the wireless network. My Macbook uses the same wireless network but I don't know how to find and connect to my home printer. It is already connected to one printer - an unopened one I will use at college. Can I connect to two? I searched via spotlight (I'm new to Macs and finding everything) and it brought me to the printer utility set up thing, but I just can't find the printer even when I tell it to add one. I'd really appreciate it if someone could help me!
Thanks,
Kerry

Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

Hi, I'm on a Mac OS. I just upgraded my wireless network to use an airport extreme. I have a verizon fios router - same as I had when it used to connect. The only change was adding the airport extreme. Now, the officejet 7410 all-in-one will not connect to the wireless connect. It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do. It used to ask me for the network password. I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error. One time it never gave me an error and seemed like it had worked, but was not connected. It just gave up.
My configuration page indicates offline with no active connection and wireless status disconnected.
I restarted everything with no change. I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
Also, as a separate issue but related. In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work. That created another problem in that now it seems that HP no longer supports a driver for this printer. Is that even possible? It's not that old. It says it does not exist on the software update. Please help!

Hi YSJA,
I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
Wireless Printing Center Troubleshooting
http://www.hp.com/global/us/en/wireless/troubleshooting.html
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Connecting MacBook to printer via wireless network

I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.

Hi topgunner,
How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing?

IOS 5 can't connect to WPA/WPA2 Enterprise Wireless Network

After upgrading multiple iPhone 4 (CDMA versions) to IOS 5.0, I have not been able to get them to connect to our WPA/WPA2 Enterprise wirless network. We use a Cisco Wireless LAN Controller. The wireless network is capable of doing WPA or WPA2 Enterprise with PEAP. These phones all connected to this network fine before the upgrade.
When connecteding to the network, it prompts me for the username and password and when I tap join it sits for about 10-15 seconds then says "Unable to join the network" with a Dismiss button.
It connects to non-Enterprise networks just fine. I have tested it on WPA Personal and WPA2 Personal networks and it has worked on several without issue.
I have tried "forget this network" with no success.
Is anyone else having this problem? I know of at least three Verizon iPhone 4's that have this exact same problem. I haven't seen one working with this configuration yet.

I have the same problem:
Cisco WLC's -> WPA2 Enterprise AES + EAP-PEAP 802.1x with CCKM
Pre 5.0 - all worked fine
Post 5.0 - it tries to connect and after few moments i get error - couldn't connect.
Info from controller:
10/17/2011 12:16:37 CEST           INFO           172.16.16.X           Sending EAP request to client from radius server. 6.f. ..l
10/17/2011 12:16:38 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:39 CEST           ERROR           172.16.16.X           Retransmitting EAP-ID request to client,retransmission timer expired. 5.y. ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           Authentication failed for client as EAP ID request from AP reached maxmium retransmissions. 5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           De-authentication sent to client. 5.oP ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           5.yp ..l
10/17/2011 12:16:40 CEST           ERROR           172.16.16.X           EAPOL-key is invalid, scheduling client for deletion. 5.yp ..l
On the Radius server i don't see any activity regarding this device.
I had this network configured on my iPhone - after upgrade and restore it remembered it. Every time i was in vicinity of my Enterprise WLAN it tried to connect - resulting int express battery drain - 6-7 hrs and battery was empty from 100%

WRT110 Can't connect MAC and PC to wireless network at the same time.

I installed a WRT110 router on my son-in-law's MAC sometime back and at the time configured it to have the MAC connected via Ethernet. My PC laptop worked fine with it in the wireless mode. Recently we changed the MAC to wireless newtworking and removed the Ehthernet connection. Now if the MAC connects to the wireless network first and then I attempt to connect with my PC laptop the PC cannot find the network and the MAC loses connection. If I shut my PC down the MAC will not find the network until it is put to sleep and reawakened. If the MAC is put to sleep my PC wil immediately find the network. If I first connect my PC and then awaken the MAC both work fine. I've checked all of the router's setup settings and they seem to be OK. I am not MAC savvy and my son-in-law is a neophyte at computers so we are really helpless when something doesn't work. Help will be appreciated.

I tried this setup change after reading another similar post. It didn't help. One thing I had wrong in the first post is that neither computer will connect to the wireless net after we experience the wireless failures until both are turned off, at least that is what happened after making the suggested changes. Is this a WRT110 issue? Seems there are quite a few posts similar to mine.
Bo2

Unable to connect hp photosmart c4480 printer to wireless network

I just purchased a new laptop HP dv7-6169nr but I'm unable to connect to my HP printer Photosmart C4480. I'm connected by home linksys. I tried to set up connection by using "sharing" properties but I guess I must be doing something wrong because I'm able to find the printer but when I try to print, the computer cannot find the printer. Can anyone help me?

Hey there!
Do you have a different pc available? Or if you have a friend who has a laptop will do as well. Because that will answer your question if its an issue with your pc. If it doesnt work with the other pc and you've tried a diff cable, its a big possibility its with the usb port on the printer.
Now, if you dont know anybody with a diff pc, you might wanna check your firewall settings. Its also one reason why your pc cant detect the printer.
You can also disable the startup programs just to make sure its not an issue with any 3rd party software. Try to follow the steps in this link in how to disable them ( and make sure you re-enable them once your done )
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&la...
if one of my advice works or helped a little, you can click the *KUDOS* button on the left. thanks.
Disclaimer : Even though im working for HP, all comments and suggestions are my personal opinion. HP still has a process to follow. (But i hope it will help ü)

Connecting Ethernet Macs & printer with wireless network?

I have a small LAN (500MHz Cube, iMAC, Tally T8016 Laser Printer) handled by a Belkin 4-port router, connected to a cable modem.
I would like to incorporate a new Mac mini, a MacBook and an AirportExtreme Base Station but have some problems. Connecting the AEBS to the cable modem via WAN and the router via LAN works half way. All 4 computers connect to the Internet without problems and the 2 Mac's connected to the router can use the printer, but the wireless ones don't recognize it. What am I doing wrong? Is there a better way to incorporate all 6 units (4 MAc's, printer and AEBS)?

Hmm .. it didn't work. When I remove NAT & DHCP I loose immediately all Internet connections on the 2 computers connected to the Belkin router.
I have now tried to
1. Shut down all computers, router, modem and AEBS.
2. Hard reset AEBS - wait 2 hours.
3. Connect Macmini to AEBS via Ethernet cable (LAN) and start up fresh. Internet connection works.
4. Remove Ethernet and establish wireless connection - Internet connection works.
5. Connect LAN output on AEBS to Belkin WAN input - [Belkin is still set to "no" NAT & DHCP].
6. Start Cube (connected to Belkin) and printer (connected to Belkin) - still no Internet connection and printer invisible to Macmini.
I guess I have to try Option #2 now, that is, connect the Belkin router to the cable modem, use 1 port to connect to the AEBS and disable the "distribute" option on the AEBS, and use the router ports to connect the Cube and printer.

Can't connect Airport Express to existing wireless network!

I just got my new A Express. i try to wirelessly join an my existing network but when it restarts it doesn't see the device. It's i'm trying to set it up so that I can use it as a wireless printer connection for my two macbooks, but all i end up with is the flashing amber light. I've tried a hard reset and that's clearly not solving the problem.
i'd welcome some help as well.

for some reason i had a problem with my airport in my laptop and it couldnt find networks that are hidden.. so that might be the problem the encryption.

Can't connect to my company's wireless network after 10.6

I was connected when I upgraded, but as soon as it restarted I can't re-connect, or I do get connected and it says "No IP Address".
The network is a WPA network. I've removed it from the list of saved networks, deleted the com.apple.airport pref file and rebooted but it is not picking up the settings for the network correctly. When I change them to what I think are correct it still doesn't work.
Also, while in the Network pref pane It added the network as a 802.1x network, but when I click connect it just hangs.
A couple times it has connected but about 10 sec later an "!" appears over the indicator and then it keeps disconnecting/reconnecting.
Any ideas?

Yup, I am having the same problem, I just assume go back to regular Leapord but that means a clean install and I don't really care to do that. The solutions seem rediculous, just wait and meaybe it will work after an hour? Really? Or restart my router, tried that and nothing. Changed the security to nothing and I still couldn't connect. This is redicuolous, Thanks Apple for your attempts to be like Microsoft and put out a crap product. To me, this is unacceptable. Beta testing should have identified the problem and they should have fixed it before release. Now, apparently, there are a bunch of users who have airport issues. If anyone has a real solution, please provide it, otherwise, Apple needs to get their, you-know-what together and fix the problem asap.

Can't Connect AirPort Express to existing WPA network

I just bought an AirPort Express and I can't connect it to my existing Wireless network where I use WPA based security.
I've both tried to use the Configuration guide and done it manually with the Admin tool but it just will not connect to my Wireless network.
Less of changing form WPA-PSk to WEP128 I think I have tried "everything".
Any ideas?

Can you changed your router to use WPA:TKIP as opposed to WPA:AES?
When I changed my router to WPA:TKIP, my airport express connected, but with AES it doesn't!
This is not good, since according to Wikipedia, AES is superior and considered part of WPA2, which Apple claim they support (and yes I am using firmware V6.3)!
Hope this helps!

HP Photosmart 7510 printer wireless connection to Mac Book Pro

My new HP Photosmart 7510 wireless printer won't stay "connected" to my Mac Book Pro. Every time I try to print, it says it is "looking for printer" and "printer is disconnected." Sometimes it finds the printer and I get the pages, but several times, it hasn't found the printer at all. Thanks!

Hi there clhs,
Could you provide the community with a little more information to help narrow troubleshooting? How are we connected to the printer USB/Wireless/ethernet?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Can't Connect Photosmart 7510 Printer to Wireless Network

Similar Messages

Maybe you are looking for