Can't connect to a domain pc remotely from home pc
Hi
I am trying to connect to my work PC, which is connected to a domain, from my house PC.
The house PC is on a wifi network, and the work domain PC on a DSL network.
I have the IP address of the domain PC that I'm trying to connect to.
I used teamviewer to connect to it, but suddenly teamviewer doesn't connect anymore.
The PC that I'm trying to connect to has it's remote desktop allow connections enabled under the My Computer --> System Properties --> Remote Settings
Steps I took to try and connect via remote desktop:
1. opened Remote Desktop Connection
2. Typed in the IP address
3. An error comes up saying: "Remote desktop cannot connect to the remote computer for one of the following reasons"
I've tried the port fowarder, ip-address:3389 but that does not seem to work...
How can I remotely connect to my pc?
Are you using the free version. As i know with free version after certain time it stops working. Happened to me in the past.
I always have a backup remote connection you can try one of these but you need to install these software on the remote machine first.
This one is free only for personal use and it works really well. Once configured on both end you have the option of RDP in this software.
http://www.ammyy.com/en/
Also us the free logmein.
https://secure.logmein.com/products/pro/
Thanks
Similar Messages
-
If I have an IPad mini and my wife has an IPad, can I connect to her IPad with FaceTime from my IPad Mini? Are multiple Apple ID's required? One for each device/person?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)
The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR. -
I need to connect to my work PC remotely from my macbook. I think I need the citrix software. But which version and what is the procedure?
Probably don't need citrix software. Is you computer in the office on LAN? Also, is the office computer setup for remote access? If it's windows then its going to be running Remote Desktop Protocol (RDP) natively. If it is in fact RDP that your windows machine at work is using then you need to download RDC for mac. I use it to connect to my work computer using RDP (don't tell the "Info Tech" dude at my office) and if your not too tech savvy I would suggest trying GOTOMYPC. It's alot easier to setup. But if you have experience in setting up remote access and your Windows office machine is connected through LAN and your IT TECH has allowed port forwarding then you should be just fine with RDP and it's free!!! But are you logging onto your actual computer at work or logging into the "SERVER" through your work machine... believe me it's two completely different things.
Basically, you'll need:
1. Physichal IP address of work computer. (If office computer is on WIFI this won't work) use IPCONFIG commands in command prompt
2. Port forwarding needs to be enabled by your IT Tech
3. Remote Desktop settings will need to be enabled on the office computer
4. Download RDC for mac (search google)
5. Type the physical IP address into RDC and hit connect... type in credentials and your all done.
We need lots more details though... there are many ways to connect remotely and if your office already has a system in place for remote access then any details would be helpful in determining which method will suit you best. If it's citrix just have your IT dude set it up. If you think you need citrix then good luck.... -
can't connect to my iCloud account - not from my Mac's, not from my Phone and not from my iPad. Worked earlier today, but not now. Any known problems right now/Eric
Seems to be a major problem, according to MacRumours. Just have to wait, I guess...
-
Is it possible to transfer iMOVIE 11 projects between my iMac and iPad2 so that I can work on projects when I'm away from home?
ARD is totally unnecessary and inapplicable for your scenario. ARD is a Mac OS X application for managing other Macs and is not useful if you want to connect to a Mac from some other OS. Mac OS X has a VNC client build int, so VNC, or one of the number of other remote control solutions - LogMeIn, for instance, if they offer a Linux version - is where you want to be looking.
Regards. -
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
hello,
I have a server 2012R2 and a mac with vmware, every time i try to connect to my domain with my machine, it doesn't work. I always get error can't connect to AD DC, active directory domain controller, My DHCP is running on my server and my DHCP on my
router is turned of, and also entered HTTP HTTPS RDP ports, Buth i am able to connect by remote desktop connection. i have set
do i need to let my server let him self use DHCP for him to find his IP or set it as static, on my pc I also don't use a static ip should i change that.
the error i get on my pcI'm not clear on your explanation. Are you running a Mac with VMware? Have you installed a 2012 R2 VM within VMware? Is this VM your domain controller? When you say you are able to connect by remote desktop connection, do you mean
that you can connect from your Mac to the Windows Server using a Mac RDP program? When asking about DHCP for the server, if you have set up the Windows Server as a domain controller, that requires a fixed IP address.
It always helps debug networking issues if you provide the output from ipconfig /all on both the source and destination machines. If your source machine is a Mac, I don't know the equivalent command, but the same sort of output is useful.
.:|:.:|:. tim -
Can't connect to server domain from server
Hi,
Since 2 days ago, i stop being able to connect to server domain from its own browsers. I'll try to explai:
I've my server up and running, you can check here: http://www.servidorlocal.com. I'm able to connect to this domain from all computers inside network and from my IOS devices over 3G.
The problem is when i try to connect from the server itself (safari, chrome, etc) always give me an error telling that cannot find the host.
Trying to connect over localhost or 127.0.0.1 it also works, but with the domain didn't work...
I cant understand why.
Hope someone here can help me solving this issue.
Regards
MozackOK,
I've solved the problem. If someone with the same problem, here what i do:
1 - System > Preferences > Network
2 - Choose from the list the network adapter that server uses, in my case is the LAN adapter.
3 - Click Advanced
4 - Re-configure the LAN connection (even with the same data).
5 - OK, server running locally too.
Thanks -
Can't 'Connect As' when trying to remotely log in via Shared
Hi all,
I've got a bit of an odd question. I have a suite of 10x iMacs networked together. All the machines can see each other on the Finder 'Shared' sidebar, yet if I click one (so as to copy files etc from one machine to another) I just get the coloured pin wheel. I assume that the machine is trying to auto log in, but for some reason it won't. Clicking the 'Connect As' button to try and force a manual log in will not work. Because of this I can't share my files properly.
Anyone have any ideas? I'm sure this used to work and nothing has changed to the machines/network other than basic OSX updates.
Cheers!Make sure:
1. Firewall/AntiVirus/Security software isn't blocking Skype from connecting.
2. No proxy settings exist in Skype's connection settings. This can reset that:
http://www.pcdust.com/Downloads/ListFix/ListFix.exe
3. No Windows policies exist with proxy settings. This can reset that: http://www.pcdust.com/Downloads/PolicyFix/PolicyFix.exe
4. Router isn't somehow blocking Skype.
5. Using an unsupported version of Skype. Currently any version below 6.14 can loose connectivity to Skype requiring an update to a newer version though this may change. -
Outlook can't connect with Exchange 2013 after migration from Exchange 2007
<style type="text/css">P { margin-bottom: 0.21cm; }</style>
Hello,
recently we've done a Exchange 2007 sp3 to 2013 sp1. Users can conect perfectly with OWA and with his iphone clients.
But the problem is they can't connect from his Outlook clients (2010, 2013), both internaly and externaly. Always fails with the message: The Connection to Exchange it is not avaliable.... Can't resolve the name of Exchange server.
To try to resolve it we've done:
- Check Outlook anywhere configuration en EAC: it is configure with and external url mail.company.com and internal server.domain.local. The security is the default Negociation, but we've tried all.
- Check the internal dns, there are records for mail.company.com and exchangeserverdomain.local pointing to the exchange local ip. Also there is a public zone company.com with the record mail.caompany.com pointing to the exchange local ip. Also we've made
records autodiscover.company.com and autodiscover.domain.local pointing to the exchange local ip.
- In the public dns from our domain there is the record A and MX pointing our public ip. There aren't any record Autodiscover but we think that the manial conection should work.
Check certificates: we've made a new self-signed certificate including all this internal and external domains and for all services.
- Check Outlook Anywhere block: we've cheked.
Currently server state:
- Old Exchange 07 server can't start, it was in very bad state and we achieved migrate the mailbox to the new server, after that we tried to uninstall, but it crashes with a public folder replication error. We got uninstall all the roles
unless the mailbox. After a restart it can't start.
-The new Exchange 2013 looks great, there isn't any trail of the old server, or we haven't seen anything in the EAC or shell.
I paste below the result of Microsoft Remote conectivity analaizer, with Outlook anywhere test. It is clear that there is a problem with that.
Sorry because the test is in spanish and I translated it with google, from here I only can access the tool in spanish.
We continue to try to resolve the problem.
Thanks to all in advance!
Testing RPC / HTTP connectivity.
Error in testing RPC / HTTP.
additional Details
Elapsed time: 24295 ms.
Test steps
Connectivity Analyzer Microsoft is trying to test Autodiscover for [email protected] .
Error in automatic detection test .
additional Details
Elapsed time: 24294 ms.
Test steps
Attempting each method of contacting the Autodiscover service .
Failed to properly contact the Autodiscover service using all methods.
additional Details
Elapsed time: 24294 ms.
Test steps
Trying to prove possible Autodiscover URL https://empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 1509 ms.
Test steps
Attempting to resolve the host name in DNS empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 80.36.252.194
Elapsed time: 507 ms.
Testing TCP port 443 on the host to ensure empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 464 ms.
Testing the SSL certificate to make sure it is valid.
The SSL certificate is not exceeded one or more certificate validation checks .
additional Details
Elapsed time: 537 ms.
Test steps
Connectivity Analyzer Microsoft is attempting to obtain the SSL certificate from remote server on port 443 empresa.com .
Connectivity Analyzer Microsoft successfully obtained the remote SSL certificate.
additional Details
Remote Certificate Subject : CN = mail.empresa.com , issuer : CN = mail.empresa.com .
Elapsed time: 454 ms.
Validating the certificate name .
The certificate name was validated successfully .
additional Details
Hostname empresa.com was found at the entrance of the alternative subject name of the certificate.
Elapsed time: 1 ms.
Is validating the trusted certificate .
Validation Error trusted certificate.
Test steps
Connectivity Analyzer Microsoft is trying to build certificate chains for certificate CN = mail.empresa.com .
Could not build a certificate chain for the certificate.
Tell me more about this issue and how to resolve
additional Details
The certificate chain did not end in a trusted root . Root = CN = mail.empresa.com
Elapsed time: 31 ms.
Trying to prove possible Autodiscover URL https://autodiscover.empresa.com/AutoDiscover/AutoDiscover.xml
Error in testing this potential Autodiscover URL .
additional Details
Elapsed time: 21723 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 498 ms.
Testing TCP port 443 on the host to ensure autodiscover.empresa.com listening or is open.
The specified port is blocked , not listening or does not generate the expected response .
Tell me more about this issue and how to resolve
additional Details
Network Error communicating with the remote host.
Elapsed time: 21224 ms.
Attempting to contact the Autodiscover service with the HTTP redirect method .
Error when trying to contact the Autodiscover HTTP redirect method .
additional Details
Elapsed time: 606 ms.
Test steps
Attempting to resolve the host name in DNS autodiscover.empresa.com .
The host name is resolved correctly .
additional Details
IP addresses returned : 46.16.56.40
Elapsed time: 14 ms .
Testing TCP port 80 on the host to ensure autodiscover.empresa.com listening or is open.
The port was opened successfully.
additional Details
Elapsed time: 202 ms.
Connectivity Analyzer Microsoft is checking the automatic detection of host empresa.com for an HTTP redirect to the Autodiscover service.
Connectivity Analyzer Microsoft could not get a HTTP redirect response for Autodiscover .
additional Details
Web exception occurred because an HTTP 404 response was received - Unknown NotFound . Headers received: Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27:58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 +
lenny3 with Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3 HTTP Response Headers : Connection : close Content- Length: 1209 Content- Type: text / html Date: Wed, 12 Mar 2014 15:27: 58 GMT Server : Apache/2.2.9 (Debian ) PHP/5.2.6-1 + lenny3 with
Suhosin -Patch X -Powered -By : PHP/5.2.6-1 + lenny3
Elapsed time: 388 ms.
Attempting to contact the Autodiscover service using the method of DNS SRV redirect server.
Connectivity Analyzer Microsoft could not contact the Autodiscover service using the DNS SRV redirect method .
additional Details
Elapsed time: 186 ms.
Test steps
Trying to find the SRV record in DNS _autodiscover._tcp.empresa.com .
Not the Autodiscover SRV record in DNS found .
Tell me more about this issue and how to resolve
additional Details
Elapsed time: 186 ms.
Checking for a CNAME record for Autodiscover in DNS for your domain " empresa.com " to Office 365.
Could not validate the Autodiscover CNAME record in DNS. If your mailbox is not in Office 365 , you can ignore this warning.
Tell me more about this issue and how to resolve
additional Details
No Autodiscover CNAME record for your domain ' empresa.com ' .
Elapsed time: 268 ms.
jsptHello,
We have the Self-signed certificate that comes with Exchange, and we've created a new self-signed including all our domains mail.company.com, domain.local, exchange13.domain.local, autodiscover.company.com, autodiscover.domain.local.
below I print you the result os the comand Get-ClientAccesServer | fl . Now we've configured a SPC objetct folow the instructions of Wizard
Exchange Server Deployment from Microsoft. We've executed the commands in our new Exchange 13, but can't did it in the old Exchange:
$AutodiscoverHostName = "autodiscover.contoso.com"Get-ExchangeServer | Where {($_.AdminDisplayVersion -Like "Version 8*") -And ($_.ServerRole -Like "*ClientAccess*")} | Set-ClientAccessServer -AutoDiscoverServiceInternalUri https://$AutodiscoverHostName/Autodiscover/Autodiscover.xmlThis is the result of
RunspaceId : 89c86f8e-d156-4480-b31d-59215976879b
Name : EXCHANGE13
Fqdn : EXCHANGE13.domain.local
ClientAccessArray :
OutlookAnywhereEnabled : True
AutoDiscoverServiceCN : EXCHANGE13
AutoDiscoverServiceClassName : ms-Exchange-AutoDiscover-Service
AutoDiscoverServiceInternalUri : https://autodiscover.company.com/Autodiscover/Autodiscover.xml
AutoDiscoverServiceGuid : 77378f46-2c66-4aa9-a6a6-3e7a48b19596
AutoDiscoverSiteScope : {Nombre-predeterminado-primer-sitio}
AlternateServiceAccountConfiguration :
IsOutOfService : False
WorkloadManagementPolicy : DefaultWorkloadManagementPolicy_15.0.825.0
Identity : EXCHANGE13
IsValid : True
ExchangeVersion : 0.1 (8.0.535.0)
DistinguishedName : CN=EXCHANGE13,CN=Servers,CN=Exchange Administrative Group
(FYDIBOHF23SPDLT),CN=Administrative
Groups,CN=First Organization,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=domain,DC=local
Guid : e83055fe-217b-4ed6-9cd0-7711097baf99
ObjectCategory : domain.local/Configuration/Schema/ms-Exch-Exchange-Server
ObjectClass : {top, server, msExchExchangeServer}
WhenChanged : 09/03/2014 12:46:07
WhenCreated : 08/03/2014 19:15:54
WhenChangedUTC : 09/03/2014 11:46:07
WhenCreatedUTC : 08/03/2014 18:15:54
OrganizationId :
OriginatingServer : severdc.domain.local
ObjectState : Unchanged
I hope this stuff can help you.
Thanks!!
jspt -
How can I connect to more than one computer from external ip
Hi
I have been using remote desktop for some time and have a port forward set so I can connect to our mail server from anywhere else externally from my macbook pro, but how can I connect to other macs in the office when there only seems to be the two ports available for use 5900 and 3283. I can only port forward to one computer? How can I connect to multiple computers when not within the same network? are there other ports available?
Cheers
TonyIf your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, you can only get reports, push package/files to etc. for a single workstation.
ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install third-party VNC software on the systems (since the ARD client cannot listen on any port other than 5900 while other VNC systems can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
http://docs.info.apple.com/article.html?path=RemoteDesktop/3.0/en/ARDC715.html to connect.
The only other options are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
Hope this helps. -
Connecting to new Time Capsule remotely from a PC
Hello,
Sorry for asking this question, I searched through some websites online but I couldn't find any convincing answer. I am using TC with my iMac and Macbook Air (remotley) and it works fine, Now I am trying to connect to the TC remotely on windows 8. I have Airport Utility 5.6.1 intalled on my windows machine. The setup works fine when I am inside the network but when I am out, nothing shows up in the Network window.
Any idea on how to make it working ?
Best Regards,The sad news is that it won't work.. TC only exposes AFP protocol to the web.. PC do not use AFP.. only SMB. Apple made using any other protocol impossible.. so the sad news.. you cannot do it. SMB is blocked from use over internet.. it has no security and even if you play tricky with it.. opening the required ports will present a hole into your network the size of a large ocean.. don't do it.
Nor does apple provide anyway for windows to work of course .. why would they.
You can do it by proper PC means.. that means get a vpn router. Relegate the TC to bridge behind the vpn router and connect directly to your home network by vpn.. the MBA can also connect this way.. ie it is universal unlike Apple's BTMM method. -
Got a new iPad 2 and now I can't connect to iTunes or transfer purchases from iPad 1
Have iPod,ipad2, iPhone but can't open iTunes on iPad
Ok...i got a new iPad and I was Able to sync it with no problem. I have a few magazines and i cant down load them it says it doesnot recogize me so I wrote to the app support and they requested the purchase history from my pc I can see it but from my ipad i try to go into my itunes purchases and gives me the message can not connect to itunes. I went to itunes on my pc and all my devices are in the authorized devices but not my ipad 2...there can u understand me now :-{
-
Can't connect my Ipod Touch 2nd gen to home wireless network - please help
I have just received a 2G ipod touch today and it will not connect to my home network. I have a SKY Netgear router with numerous devices wirelessly connected with WPA security. I have input the shared network key when my Ipod asks for a password but it will not connect (even if I am stood next to my router). I just get "Unable to join the network .........". I have tried connecting via the 'other' network route but still the same result. Please help.
Here's a few things you can do to get to the bottom of the problem:
- Have you ever connected to a public hotspot? The only reason I ask is this will rule out hardware problems. If you are not close to anything, download and install the free app WiFinder from the app store. Once you have the app installed, you see what networks are around you. If nothing is working, contact Apple and either visit the Genius Bar or return it Apple.
- If you have disabled encryption in your router and you are still be prompted for a password, you need to tap on that network name and tap Forget Network. And to really make sure everything is cleaned out, go to Settings > General > Reset > Reset Network settings.
- After your iPod restarts, use WiFinder to find your network. WiFinder will tell you whether or not you have encryption on or off and the type of encryption used. If it is still off, just tap the Connect button. If you have turned it back on, go to Settings > WiFi > Other network and enter your network name. You will be prompted for your encryption scheme and your password. WPA and WPA2 should have a password entered. WEP should have the hex key entered.
- If you still can't connect, I would check and reenter my password. Passwords are case sensitive.
- Assuming you have connected, tap the blue arrow (>) next to your network name. You should see your IP address, subnet mask, router IP address, and DNS router addresses, you are good to go.
- If you have an IP address of 169.x.x.x, your router is not supplying an IP address. Recommend router settings are:
SSID - on
DHCP - on
MAC filtering - off
Encryption - on and set to WPA or WPA2
DNS - automatic from ISP
Let us know what happens.
Maybe you are looking for
-
Scanning multiple pages from a HP Photosmart D110
I'm a relatively new MacBook Air user. When trying to scan a document with my HP PhotoSmart D110 printer/scanner, I am only able to scan one page at a time. My wife's older MacBook offers the option to add pages to the scan (as did my last several
-
I have been uploading pictures for a while but ran into a problem last night that I cannot resolve. I was uploading files starting in Revel and selecting the "add photos to album". I selected 144 photos but only 88 uploaded. I checked and confirme
-
Understanding Sizes for Interactive PDFs
This is what I want to accomplish: Create an interactive PDF with a page size of 1920x1280. In other words when someone opens the pdf and they select the full screen the layout they will get a page that exactly fits the screen (assuming the user has
-
How to add patch in Oracle Payable under Linux
Hi All I want to know how to apply a patch in Oracle under Linux environment. The problem is that I'm a Newbie in Oracle and i'm not a DBA and also i have little knowledge in Linux environment. Apps: 11.5.9 OS: Linux x86 Patch : 7309767 Thanks Edited
-
How to increase image size by file size?A
I'm submitting photos to a stock site that requires a file size of 50 MB per image. Is there a way to increase file size to match exactly 50 MB? What I've been doing is trying to guess the size of the image in pixels until it reaches 50 MB but that's