Can't connect to Airport over ethernet with XP Home SP3

I can't connect to Airport Base station dual ethernet over ethernet with XP Home SP3. The XP lan connection said Windows could not complete : Renewing your IP address, when i try to repair the connection. the apple Extreme Admin utility shows Base Station Information but can't configure it and said:
The Base station has been reset and is not configured, make sure your computer is configured for a 192.42.249.X-compatible IP address so the base station can be reset to its default configuration. Can any one help with this? I want to set up the airport so I can provide wifi to an IPod but i cant get XP to connect properly it said i have limited or no connectivity.

Its working now but the windows computer still cant get the aiprort base station to start a dialup connection. I dont wnat to usr the ipod for this all the time. Any ideas how to get XP to force the Airport Base Station to open a dial up connection.

Similar Messages

Windows XP client can't connect to AirPort Extreme AP with WEP enabled.

Hello,
I have big problem with Mac Mini AirPort Extreme working in AP mode with Windows XP client.
Some time ago, AP refuse to connect Windows XP clients (notebook) when WEP is enabled (40/128 bit, same problem), while before that, everything work perfect.
On other hand, iPhone can connect using WEP without an problem.
When WEP is turned off, XP client can connect but this is not acceptable for me.
I must notice that friend of mine have absolute SAME PROBLEM which rise almost at same time few months ago. They have Mac Mini and XP notebook (different then mine) which can not connect with WEP turned on, while his iPod touch work!
I guess that this happened due AirPort Firmware upgrade included in some of Apple software update.
Does anybody have similar problem or know the solution?
My AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x168C, 0x86)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 1.4.16.2
Current Wireless Network: Mac mini
Wireless Channel: 11
Tnx in advance.

mikikg, Welcome to the discussion area!
Sorry but this is a known issue.
The only solution is to get a real wireless router instead of using your Mac mini as a base station.

Internet Connection sharing AirPort over Ethernet - DHCP not starting

I am trying to share my internet connectoin form my PB17 with OSX 10.4.5. The problem is the ethernet interface is not getting set to 192.168.2.1 when I start the sharing. Also, the client I have connected to the ethernet port is not getting an IP address (yes, is is set to automatically recevice an IP). This is leading me to believe the DHCP server is not starting on the PB.
Internet sharing is enabled
Personal Web sharing enabled
Both enabled in the Firewall settings
The ethernet port is set to DHCP (but I'm assuming that once I turn on sharing it should assign itself an IP address correct?)
CLient set to automatically get an address
Any ideas?

Disregard the msg above. Below is the text I need help with, for some reason I kept getting a message saying I could not edit the above post...
I am trying to share my internet connectoin form my PB17 with OSX 10.4.5. The problem is the DHCP appears not to start or serve addresses. The client I have connected to the ethernet port is not getting an IP address (yes, is is set to automatically recevice an IP), but is setting itself to the default 169.x.x.x address. This is leading me to believe the DHCP server is not starting or serving addresses on the PB17. In the Activity Monitor I can see Internet Sharing running.
Internet sharing is enabled
Personal Web sharing enabled
Both enabled in the Firewall settings
The ethernet port is set to DHCP (but once sharing is enabled is should tell clients it is 192.168.2.1, correct?)
CLient set to automatically get an address
oh yea, if I use my wife's PB15 w/ OS X 10.2.8 it works fine.
Any ideas?

Can't connect macbook pro to internet with airport extreme

Can't connect macbook pro to internet with airport extreme

If you have ethernet still on your MBP plug it in by ethernet and tell me if that works.
Tell me how the Airport is setup.. what broadband modem and router you have.
What OS on the laptop? Yosemite I guess.. since it is the most troublesome.
Did it work before whatever change was made? Has it worked in the past? When did it stop and what did you do that coincided with it stopping?
Upgrade to Yosemite??

HT1126 Can I connect the Airport Express directly to my wireless router?

The old owner of my house set the Air port for my use, gave me a password ... when I tried it, the password never worked.
DO not want to lose my old wireless system as it allows me to do more than just the Air Port.
should I reset the system?

can i connect the airport express into an ethernet port in the wall
I assume you are asking about obtaining an Internet connection here.
First, temporarily turn off the wireless on a laptop and connect the laptop to the Ethernet wall jack with an Ethernet cable. Can you log on to the Internet this way?
If yes, then you can connect an AirPort Express to this Ethernet port and configure it to provide a wireless signal for multiple devices.
If no, then you can connect the Express, but you will not have an Internet connection.

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

TS1368 I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).

I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.

What Options I can implement for comunication PC ( lan ethernet) with SNA S

What Options I can implement for comunication PC ( lan ethernet) with SNA Server (Lan Token Ring) :
To see file
thanks you,
jj González

What version of SNA server are you using?
SNA server version 3 and higher support tn3270/tn3270e (for mainframe connectivity) and tn5250 (for as/400 connectivity) clients. The ms windoes telnet client does not support those protocols so you need a 3270 and/or 5250 emulator from another vendor, such as NetManage or Hummingbird.
This assumes that you have a routed network between your workstation and the sna server.
If your network is bridged, then you need to use an emulator that works with the native sna protocol, as the sna server supports that as well. The NetManage and Hummingbird emulators will work in this case too.
Try to use the tn3270/tn5250 as the first choice as it does not require a bridged backbone. SNA is not a routeable protcol by default.
Let me know if this helps.

Can I connect and use Time Capsule with two printers?

Can I connect and use Time Capsule with two printers?

Sure, if the printers connect using the Ethernet port, you have 3 ports on the Time Capsule.
If the printers connect using wireless only, the Time Capsule will support up to 50 connections.
If your printers connect using USB, then you will need a powered USB hub. Something like this, for example:
Dynex 4Port USB 2.0 Hub DX-THUB16 - Best Buy

Can not connect outside of Lan to with rtsp PVC2300

I have the following cameras set up at my office
1 - PVC2300
2 - WVC54GC
3 - AXIS 225FD
I have a BEFSR81 Router
I have a computer on Windows XP running the surv software to record. Everything with that is good.
I also have 2 desktops.
I have been playing around with the rtsp feed with the pvc2300, but have run into a few problems.
1(a). I can not connect outside of the LAN with RTSP with either the VLC player or quicktime. It connects and asks for a password and then just hangs.
The PVC 2300 local address is 192.168.1.102 with ports 554, 5000-5010, and 6970-6999 forwarded on the router. What am I missing?
1(b) I can successfully connect with my blackberry bold, although when I try to change the default port (554) to something else (I would like to RTSP my the AXIS camera as well, so I will need a different port) it connects on my bold, but then says server is unresponsive. What am I missing here?
2. The voice with the PVC 2300 using http outside of the LAN (internet) lags quite baddly and is choppy. This happens without fail when I have all 4 cameras running, which I understand is upload bandwidth problem. But it also happens when I connect to just the PVC2300. I do have a connection to all 4 cameras inside the LAN to the XP running the surv software, but that is it. Is the my router acting buggy? I have unplugged the router for 5 sec, and it fixed it for a while, but it always comes back. I have donwloaded the latest firmware for the router and PVC 2300 and that didnt seem ot fix it either. Suggestions?
3. This is more of a question. I know the mobile streaming of the PVC 2300 does not include voice. Is there an app or way that I can just get it to my Blackberry. Even if I didnt get the video, voice is sometimes more important to me.
I hope Ive been clear enough in my description, Im very self taught (google is amazing), but I am in no way a techy.
Thank you in advace for your help.
Colin

Glad to hear you are successfully using the SWVMS16. That program is really cool and useful. I just cant tell you how that model of Linksys Router can work for you here (that is not a model we support on this community as its not small business)
Regarding RTSP access, are you also including the mobile.sdp in the URL?
RTSP:///mobile.sdp I noticed in the camera GUI with the newer firmware, you can specify an access code under mobile settings after checking the enable mobile streaming box. That word may be what you have to include, so check that too...
Try this locally first and then remotely is the easiest way to see if you got it right, then it just becomes a routing or firewall issue to figure out.
But your forwarded ports look right and should be opened.
Under advanced settings, you can define an alternate HTTP, HTTPS or RTSP port

How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

Can I connect my macbookpro to ps2 with firewire?

I keep hearing you can make a PS2 work over firewire with the macbook pro, true? if so, how?

I never even knew that the playstation 2 had firewire back then, but I don't think it's possible cause PS2 software is not really like the modern macbook pros, sorry.

How can I connect Bluetooth in iPad retina with non apple devices ?

How can I connect Bluetooth in iPad retina with non apple devices ?

What devices?
The iPad can only pair with earphones, speakers and keyboards.
It cannot directly pair with other phones or computers for file transfer or other operations.
Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair.

Can't connect to Airport over ethernet with XP Home SP3

Similar Messages

Maybe you are looking for