Can't connect to an public wireless network

Hello,
I'm having trouble connecting to my college's wireless network. I've connected to it before. It loads a sign in page for you to login with your school ID . Since last week, I can see the network in my airport with full bars. The login page does not load and it says im not connected to the Internet. I've also put in the login page URL but that does not load either. The college's IT guy says he has seen this problems many times with macs this semester only. He said it might had been affected by a recent update.
I can connect to my wireless network at my house and also at my parents so I don't understand why I can't connect! Also , the login page loads on my iPhone.
Thanks to anyone with any answers!

I have talked to other Mac and window users who were online.. So I'm not sure why I can't connect! The tech guy told me to make sure that my mac wasnt remembering my wifi settings

Similar Messages

Can't connect AE to existing wireless network

I can't get my AE to connect to my existing wireless network. I saw the other thread on this and followed those steps, but it didn't work. Here's what I did:
1. Connected the AE to my D-Link DIR-655 wireless router via ethernet cable.
2. Opened Airport Utility and established a connection to the AE.
3. Renamed the AE and entered a password.
4. In the "wireless" tab, I selected "join existing network", chose my wireless network, selected the security type (WPA Personal) and entered the password.
5. In the "music" tab, I named the speakers and entered a password.
So far so good. I clicked "update" and the AE restarted. After a while I received an error message informing me that the base station could no longer be detected. According to the directions posted in the other thread, this is actually supposed to be a sign that the AE is now in client mode and all is well.
I unplugged the ethernet cable from the AE and router and then went to the other room. I plugged the AE into the speakers and then plugged the AE into the wall.
However, instead of a green light all I have is a flashing amber light, even after several minutes. No connection.
I reset the AE and repeated the steps above, to no avail. Still a flashing amber light.
Any ideas?

I'm having a similar issue. My AE is connected directly to a Netgear WGR614v4 router, and I run through all the steps you mentioned. When I choose to update the settings to the AE, I get the same "error" you mentioned about the AE not being found, and I also took that as a sign that I'm in client mode. I moved the AE to the other room, connected my mini cable to the stereo, then plugged the AE back into the wall. The AE runs through its setup and eventually gets a solid green light, so I'm thinking all is well.
The problem is that I then log back into the AirPort Utility on my laptop and the AE is not shown in the top left like it should be. After doing a bit of reading, I've figured out that I can manually find it by going to File>Configure Other and entering the AE's IP address and password. Then I get a window showing the details of the AE, its name, network, encryption, etc. However, if I close this window, it still doesn't show up in the main AirPort Utility screen and I'm not sure how to configure it for AirTunes.
Hoping that's just a bug with the AirPort Utility software, I open up iTunes to see if I can locate it there. I know I should see a pulldown menu at the bottom of iTunes that gives me an option for AE as my audio output method, but the menu is not there. Now I'm completely stuck.
At this point I decide to start from scratch, so I do a Factory Default reset by pressing down the reset button on the AE as I plug it into the wall. Now it is supposedly reset, so I plug it back into my router, then it runs through a setup sequence and lights up solid green before I've even done anything. It shows up in AirPort Utility with a default base station ID, but my computer won't connect to it at all. I'm hoping I can try to reset it again this evening and at least get back to the normal setup screen, but I'm really not sure what I could do differently at this point.
This is frustrating and I'm on the verge of giving up, but I REALLY want this to work out.

Can't connect Time Capsule to wireless network...

I was able to backup my computer with Time Capsule if the computer and Time Capsule are connect with the internet cable. But then when I unhook the computer, it can't connect wirelessly. If I look in my available wireless networks, I do find the TIme Capsule network, but then I try to connect, it won't connect. I need some help connecting to that network so I can backup wirelessly!

If the computer can see the wireless network, connection issues can be poor signal or interference.
Wrong previous setup on the airport .. go into the network preferences for the airport and see if it is getting an IP address.. if it fails make sure the setting is correct.
Plug back in by ethernet and redo the wireless setup of the TC.
Use SMB type names.. Short, no spaces pure alphanumeric.
Use Fixed radio channels.. try in turn 1, 6, 11 (13 outside US) These are the only non-overlapping channels.
Use no security at all for testing.. but then WPA2 Personal is the only security rated for N wireless connections.
I recommend also giving a different name to 5ghz so you can force connection to the faster network.
If you still have issue change the mode of the wireless.. there are various manual options..
The idea is to reduce all auto settings so you can be sure it will work.
If you are on Lion or even Mountain Lion use the v5 utility. There are ways and means to install the later.

Can't connect printer to my wireless network

I am running Windows 8.1. Had HP Officejet 4620 and just bought a new HP Photosmart 7520. I can't connect either to wireless network. My Dell laptop is connected to my apartments wifi so I do not have a router. When I display my printer info it shows correct wifi name and gives an IP address with a strong signal.
when I print the network configuration page it shows I am connected. Help!!!!! I am currently connected by USB cable.

Hi Bob1948
I would be happy to help you.
I understand you aren't able to connect to the wireless network but you can print by a usb connection.
If you upgraded to Win8.1, then I would uninstall and reinstall the software again to get it to work.
Photosmart 7520 drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4157&lc=en&cc=us&dlc=en&sw_lang=&product=5199...
Officejet 4620 drivers.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5191...
If the computer already had Win8.1 then I would recommend to power cycle the router and the computer. Turn the computer off. Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. Then turn the computer back on again.
Try it now.
Here is a url for Printer Does Not Maintain Wireless Connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03381908&tmp_task=solveCategory&cc=us&dlc=en&la...
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Can't connect PowerBook G4 to wireless network

My wife has brought home a PowerBook G4 from work. It cannot connect to my wireless network. I use a D-Link router. Airport shows full bars, but it does not connect. I was able to connect by plugging it in to ethernet cord. Is there something with this model that has to be changed to have it recognize a wireless connection?

I am having a somewhat similar problem with my PB. I am trying to connect to a brand new (2 weeks old) Netgear wireless router. When the security password protection is turned off I am able to connect without issue. Sadly, it is a shared connection, and security needs to be on. When the password function is on, I am unable to connect. I repeatedly get a message saying "there was an error joining the airport network __."
The password is correct. The signal from the router has been switched to "mixed", per "gobnay's" previous suggestion. And I am getting enough signal strength from the router. It is set to WPA Personal, and other Mac's (a newer MacBook Air, and MacBook) have had no problems connecting. Mine is an older model, PB G4 running 10.4.11 (hardware circa 2003). It seems to be a security problem, but I am otherwise stumped...

Can't connect to computer through wireless network

I recently purchased a Powerbook G4 with OS X Server 10.4.6 installed, and I cannot connect to my iMac G5, which has OS X 10.4.6 installed. I am trying to connect them wirelessly, and it sees the G5, but tells me that it is offline and can't connect when I try. I can connect to the Powerbook through the iMac, but not the other way around. Tried different share settings on G4, but am quite unfamiliar with OS X Server. Any help would be appreciated.
Thanks.

It seems like you may not have the relevant service(s) enabled in Sharing preferences on your iMac, if I understand your problem correctly. The settings on the server, other than firewall, shouldn't matter for outgoing connections.

Can't connect to 802.1x wireless network after upgrading

I have a year-old iPod Touch that I recently upgraded to iOS 6. I have no problems connecting to my home network, but since upgrading, I haven't been able to connect to the 802.1x wireless network at my job. When I try to connect, I get a spinning circle, but no actual connection. If I do nothing, it never times out, just keeps spinning.
I've tried resetting the network settings. I am able to login and accept the certificate, but I never get an IP address. I have access to the logs, so I checked and I'm authenticating successfully. I had no problems whatsoever prior to upgrading to 6.01, and I have no trouble accessing the network with other devices, including my MacBook Pro and MacBook Air.

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Can't connect to Powerbook via wireless network......

I have an iMac and a Powerbook and a wireless router. From the Powerbook, I can connect to the iMac's hard drive wirelessly by going to the network pane then clicking on Jason's iMac G5, entering the password, etc. But, I can't do the oppostite. I would like to access the Powerbook's hard drive from the iMac but everytine I try to do so I get an error message that says "Connection's Failed: The server may not exist or it is not operational at this time. Check the server name or IP address and try again." And yes, in Sys Prefs, I have Personal File Sharing turned on on both computers BUT, everytime time I try to connect to the PB via the iMac, file sharing turns back off on the PB and I have to turn it back on....... any help would be appreciated. Thanks, Jason
Powerbook G4, iMac G5 Mac OS X (10.4.4)
Powerbook G4, iMac G5 Mac OS X (10.4.4)

I opened console.app and this is what it said:
Mac OS X Version 10.4.4 (Build 8G32)
2006-01-16 01:42:08 -0500
2006-01-16 01:42:10.906 SystemUIServer[78] lang is:en
Jan 16 01:43:54 jasons-powerbook-g4-15 crashdump[201]: AppleFileServer crashed
Jan 16 01:43:55 jasons-powerbook-g4-15 crashdump[201]: crash report written to: /Library/Logs/CrashReporter/AppleFileServer.crash.log
any suggestions?
thanks, jason

Can't connect to a certain wireless network

I canconnect to my home network, I can connect to the grocery store wifi, but when I try to connect to the school's wireless using the 13 character password that the tech guy typed in, I get a a screen and no matter what I clcik, the screen just pops back up. Other teachers have an ipad and can connect fine. What is happening. I called support and they just keep saying I understand that you are ........ I'm going to put you on hold.... I was on for over 1n hour trying to rectify it. I went back to the Apple store where I purchased it and it connects fine to their wifi. What do I need to do.

techrep wrote:
I get a a screen and no matter what I clcik, the screen just pops back up. Other teachers have an ipad and can connect fine.
What screen just pops back up?

Can't connect to school's wireless network

I'm living in residence at Laurier University, and I can't get my touch to connect to the internet. With our computers, we had to connect to our laurierdownload network first, download a program and then change some settings in order to connect to the laurierwireless network.
I can connect to laurierdownload, but I don't know how to download the program and change the settings. Sometimes, laurierwireless will show up, but when I try to connect to that, and type in my username and password- the same that I always use for the network on my laptop- it says it's wrong.
Does anyone have any idea how I can connect to the network?
PS: Here's the info on how to connect to the network. This is all the stuff I can't manage to figure out on my ipod:
http://www.wlu.ca/page.php?grp_id=47&p=9474
Thanks!
~Jessica

Laurierwireless is an 802.1X authenticated network and there have been problems reported here with accessing 802.1X networks.
IPhone and iPod touches with software 2.0 and later are supposed to support 802.1X. However getting it to work may require help from your schools IT department. See http://www.apple.com/iphone/enterprise/integration.html
Good luck.

Can't connect to DET NSW wireless network after upgrading to mountain lion 10.8.2

Unable connect to DET(DER) NSW wirless network at school.
able to connect to wired network.
Takes too long to print wirless HP laser jet CP 1025

See http://applehelpwriter.com/2012/08/07/problems-with-wifi-safari-and-mountain-lio n/

Privacy on public wireless network

what can i do to keep my personal information and passwords protected when using a public wireless network? what settings should i use?
i'm still new to macs so the basics and step by step instructions would be great.
thx.

Regardless the platform - OS X or Windows, you need to assume anything sent out over a wireless network is being intercepted in transit (which is always a possibility) regardless if access to the wireless network is password protected/encrypted or not and act accordingly.
As far as someone gaining access to your computer when connected to a public wireless network or to any network, you need to keep the built-in Firewall included with OS X enabled and don't enable any ports or services not needed such as Windows File Sharing and Personal File Sharing, etc.
Go to System Preferences > Sharing to be sure the Firewall is enabled and check for any ports or services that are enabled but not being used.

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks

Turn off your firewall and antivirus software.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? No firewall involved.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.

If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else!

IPad protection on public wireless network?

Is there any protection on iPad to prevent someone from accessing my data on a public wireless network? I know not to enter a credit card number in public, but what about the email password that is already saved there?

On an open wireless network, anyone on that network can capture the network traffic and see any clear-text data. Your e-mail password is safe IF you've got things set up to connect via SSL. Go to Settings -> Mail, Contacts, Calendars, then select the account. Edit the account, tap the Advanced button, and make sure Use SSL is turned on.
That protects your password, but note that the contents of any messages you send and receive are, and always have been, plain text send in the clear. So don't send anything sensitive via e-mail. That's good advice in general, but especially relevant on an open wireless network.
Beyond that, nobody can remotely hack your iPad and get access to the data on it. It's just the data you're sending and receiving you've got to worry about it.

Can't connect to an public wireless network

Similar Messages

Maybe you are looking for