Can't connect to any players on game center

I'm able to connect to game center just not actual players.
I purchased street fighter volt and noticed that my connection times out when attempting to connect to players. This started 3 days ago.
Since then I tried using my other game center apps and while I can post scores I can't connect to any players for actual multiplayer matches.
My connection just times out. It's not my wifi since I've done numerous test with other consoles and my router has open nat and port set up for gaming.
Any ideas? Thx

Update:
Tested in other networks and still can't get any matches to connect. Also my iPod has no restrictions for multiplayer .
My iPod isn't jailbroken and running 4.3.5  now.
Anybody? 

Similar Messages

  • Can't connect my facebook to the Game Center

    I go into my settings and I tried to connect my Facebook to my Game Center but it says that there's an communication error. Could you guys please help me

    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
     Cheers, Tom

  • I can't connect to one of my games. It was fine one minute. Any ideas.  I have done all I can think of..

    I  can't connect with one of my games.  Threw Facebook.  Tried everything. Any ideas.

    Post the screenshots of the setup of the TC so we can see what is going on.
    I want to see the main summary.
    Click edit and give us the internet tab, wireless tab and network tab.
    From that we can work out what is the issue.

  • Can't Connect to any WiFi network

    I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
    I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
    I've tried DHCP and static IP but neither works.
    I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
    Any help would be much appriciated.
    If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
    Thanks
    Matt S.

    theevilone,
    I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
    Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
    In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
    Hope this helps,
    Nathan C.

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can we connect to any SAP system if we have connection details.

    Hi Experts,
    Can we connect to any SAP system if we have connection details.
    In this thread I found Diego Lombardini asking connection details.
    Needed help on this report
    I am working in ABAP for couple of years but donu2019t have much idea about connection to SAP system, Please let me know how it is possible .
    High points will be rewarded for any helpful answer.
    Regards
    Bikas

    Hi Bikas,
      That reply is just because Diego got irritated by Ravi asking the same question in many threads many times .
    Otherwise if a SAP server is not secureed using secureclient you can always connect to that SAP system using the internet and your own SAP GUI ( perhaps based on the GUI compatibility )
    But i bet, nobody will reveal SAP server as open for you.
    Cheers
    Kothand

  • I have an iphone 4s, and i can not connect to any wirless router through wifi??

    i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network??
    any help??!!

    Seriously...and where did you get this tech tip? You do realize that all iPhone 4S's are still under warranty, although there's a very good chance your freezer trick has tripped a moisture sensor, thus voiding your warranty. Make an appointment at an Apple store, but be prepared for bad news. Good luck.

  • Airport Extreme can't connect to any server

    I can't connect to any websites using my Airport Extreme, which worked fine until yesterday, everything is set up correctly and Network assistant tells me I'm connected to the internet. Every website I try to open (in Safari, Opera, and Firefox) gives me a message that I can't connect to the server, same with Mail. Everything works fine with an Airport Express or plugging directly to the modem. All of this started yesterday when my internet was down, but the airport never came back. I've tried resetting to factory defaults, and yes I've unplugged everything about 400 times. Anyone experience anything like this before?
    josh

    It sounds like when the Internet went down, the modem got "confused" and didn't remember that the 802.11n AirPort Extreme Base Station (AEBSn) was connected to it.
    Please try the following:
    o Power-down the modem, AEBSn & computers. Order is not critical.
    o While the power is off, check to see if the modem employs a backup batter. If it does, temporarily remove it, and then, replace it.
    o Power-on the modem. If it has one, press and hold the modem's reset button for at least 3-5 seconds. After power-up or reset, wait at least 10-15 minutes.
    o Power-on the AEBSn; wait at least 5-10 minutes.
    o Power-on the computer(s).
    Your computers should be able to access the Internet (& access web sites) now. Please post back your results.

  • Can't connect to any secure WiFi network. Help...!

    Hello,
    I am unable to connect to any secure wifi network. Using iPhone 5, Model : MD300B/A, Software : 6.1.4 (10B350). Whenever I try to connect to any secure wifi network, it says password incorrect. But it connects fine with unsecured networks. Double checked the same secure networks with my iPad and it works fine. Tried reseting the network settings and all settings. Updated to latest firmware (6.1.4). Still not working.
    Please help.
    Regards,
    Madhavan

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • Can't connect to any wireless networks

    My macbook pro can't connect to any wireless networks outside of my home router. I've just taken it on holiday and I can't use it in any free wireless coffee shops or hotels.
    Whenever i select a network it shows it's connected with black bars in the radar icon but I cant access the internet or mail. Most frustrating is it's working fine in windows when I use boot camp.
    I hope someone can help

    Sometimes they can be stored in your Router and/or Modem, but having them in your Mac makes it so you don't have to rely on what's in or not in other's Routers.
    I don't understand DNS...
    Simply put.. you type in apple.com, your Browser goes out to a DNS Server somewhere with the request to link to the number of that name, then comes back with 17.254.3.183... if you ever wonder, you could type in that 17.254.3.183 IP, if it doesn't load Apple, then you are not connected to the Internet, yet if it does, and apple.com doesn't... then it's just that nothing is looking up the addy!

  • Can't connect to any webpages with any browser

    Our Powerbook G4 can not connect to any webpages with any browser (safari, firefox, IE) but other TCP/IP applications work fine. IE, the AOL application can connect via TCP/IP, iChat and skype both work fine.
    Any idea?
    Thanks,
    Alan

    It sounds to me like either a DNS server issue, or your Mac is looking for a web proxy and not finding it.
    If you don't have the DNS server filled out in your network settings, find out the DNS IP info from an ISP and try inputting it.
    Also, click on the Proxies tab in Network Settings to see if you have a proxy configuration listed (either automatic config or manually inputted proxies per port). If you do, disable the proxies and try again. If not, see if you can get the web proxy info for where you are from either your ISP or your work place.

  • Can't connect to any networks while aboard

    Hi, I am on holidays in Ireland and can't connect to any networks here. My mobile is a galaxy mini s4.
    Any help much appreciated!
    Thanks
    Tara

    Did you enable roaming on your a/c before you left? You may still be able to via your online a/c. Buying a roaming pack doesn't in itself enable roaming. See Roaming – Everything you need to know!.

  • TS1398 Update iPhone 4s to 6.1.3 (10B329) now I can't connect to any wifi networks at home or at work and all car Bluetooth systems will not connect either. Help! Extremely annoyed at apple for putting out software that causes such mayhem.

    My iPhone 4s has been update as I said in subject bar.. Now can't connect to any of my cars Bluetooth systems. Also even more frustratingly can't connect to any wifi networks at home or work!!
    How can apple put out such an update that causes so much grief and inconvenience to hundreds of people. Not to mention risking lives with Bluetooth kits not working...outraged!!!!!!

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • Can you have mutilple email account for game center

    Can I have two email accounts for game center

    Yes, you can have/use different Apple IDs for game center but youhave to sign out and sign in with the other (Settings>Game Center)

Maybe you are looking for

  • Dynamic structure handling in PI

    Hi All, Here is the detailed description of the issue I am facing in PI for dynamically handling receiver structure change. Sender : GIS (Through Web Service) Receiver: SAP ( ABAP Proxy ) Interface : Synch Equipment and Functional Location will be se

  • Help with this div - can I overlap divs?

    Hello there, I used the search function to find an answer to this, but got nothing concrete so thought I should make this thread My problem is shown in the screenshots below. I created a div id for the banner, a div id for the button "home". There is

  • Start BPM Process Trigger - Read timed out

    Hello, Please anyone know how to format the WSDL that was generated for start a process to asynchronous? When I call the wsdl from web dynpro it works (the process is succesfully triggered) but the web dynpro after a while throws a time out exception

  • IT0002 New Infotype Framework with Secondary Infotype Short Dump

    In our new ERP 6.0 system, we are seeing a short dump, ASSIGN_BASE_TOO_SHORT  in CL_HRPA_INFOTYPE_0002_BE when hiring a Belgium employee.  It appears in the new Framework, the SPECIFIC_INITIAL_COMPUTATIONS method of CL_HRPA_INFOTYPE_0002_BE is expect

  • Images with transparent background layers

    I have a number of .psd files with transparent backgrounds. If I import them into Aperture, they show up in the Browser and Viewer with black backgrounds. If I drag them into a Book, some of them behave as though transparent, but some retain the blac