Can't Connect to any Wi-Fi Network

So today (9th Oct 2013) i connected to my works wifi perfectly fine, been using it all morning. then at luch time i left the building and turned mobile data on (and 3G). when i returned it didnt connect to the wifi. and is now displaying a "Unable To Join the network "[NETWORK SSID]" " on ANY network i try to connect to.
What can i do to fix this?
Phone: Iphone 5
iOS: 6.1.2
No i do not want to "upgrade" to iOS 7. i don't like it, and i will not be able to revert to 6 after.

Changing phone name and rebooting has fixed this issue.

Similar Messages

  • Can't connect to any secure WiFi network. Help...!

    Hello,
    I am unable to connect to any secure wifi network. Using iPhone 5, Model : MD300B/A, Software : 6.1.4 (10B350). Whenever I try to connect to any secure wifi network, it says password incorrect. But it connects fine with unsecured networks. Double checked the same secure networks with my iPad and it works fine. Tried reseting the network settings and all settings. Updated to latest firmware (6.1.4). Still not working.
    Please help.
    Regards,
    Madhavan

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • Can't connect to my home WiFi network

    I'm using a linksys router and using WEP security. The iphone can see my network, but when I enter the password it tells me I can't connect. I can't seem to make the phone forget the network so that I can start over.
    Any help would be appreciated

    I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

  • I have a MacBook Pro.  My mac can detect wifi.  But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest.

    I have a MacBook Pro.  My mac can detect wifi.  But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere.  Network diagnostic has a green light for wi-fi and wi-fi settings.  Red light for the rest. (Network settings, ISP, Internet and server.)

    Hello NotAppleSavy,
    Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Can't Connect to any WiFi network

    I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
    I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
    I've tried DHCP and static IP but neither works.
    I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
    Any help would be much appriciated.
    If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
    Thanks
    Matt S.

    theevilone,
    I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
    Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
    In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
    Hope this helps,
    Nathan C.

  • Can't connect to any wireless networks

    My macbook pro can't connect to any wireless networks outside of my home router. I've just taken it on holiday and I can't use it in any free wireless coffee shops or hotels.
    Whenever i select a network it shows it's connected with black bars in the radar icon but I cant access the internet or mail. Most frustrating is it's working fine in windows when I use boot camp.
    I hope someone can help

    Sometimes they can be stored in your Router and/or Modem, but having them in your Mac makes it so you don't have to rely on what's in or not in other's Routers.
    I don't understand DNS...
    Simply put.. you type in apple.com, your Browser goes out to a DNS Server somewhere with the request to link to the number of that name, then comes back with 17.254.3.183... if you ever wonder, you could type in that 17.254.3.183 IP, if it doesn't load Apple, then you are not connected to the Internet, yet if it does, and apple.com doesn't... then it's just that nothing is looking up the addy!

  • Can't connect to any networks while aboard

    Hi, I am on holidays in Ireland and can't connect to any networks here. My mobile is a galaxy mini s4.
    Any help much appreciated!
    Thanks
    Tara

    Did you enable roaming on your a/c before you left? You may still be able to via your online a/c. Buying a roaming pack doesn't in itself enable roaming. See Roaming – Everything you need to know!.

  • TS1398 Update iPhone 4s to 6.1.3 (10B329) now I can't connect to any wifi networks at home or at work and all car Bluetooth systems will not connect either. Help! Extremely annoyed at apple for putting out software that causes such mayhem.

    My iPhone 4s has been update as I said in subject bar.. Now can't connect to any of my cars Bluetooth systems. Also even more frustratingly can't connect to any wifi networks at home or work!!
    How can apple put out such an update that causes so much grief and inconvenience to hundreds of people. Not to mention risking lives with Bluetooth kits not working...outraged!!!!!!

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • After upgrading to IOS 8 my iPhone 5 wifi is not working well at all .. and can't connect to any of apple services like apple store even can't upgrade my application

    After I upgraded to IOS 8 my iPhone is not working well at all .. the most serious issue is the wifi which is too slow and can't connect to apple store and can't update my application  .. also tried to search or update for ios 8 but also can't connect . safari also always can't connect to any the server . please check and advise

    Hey ahmedfromtanta,
    Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Wi-Fi networks and connections
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • I have an iphone 4s, and i can not connect to any wirless router through wifi??

    i have an iphone 4s and i can not connect to any wirless router using wifi, the only way it to put it in the freezer for a few minutes and the i only get like 5 minutes of wifi time and the the connection drops again and the phone can not even recognize the network??
    any help??!!

    Seriously...and where did you get this tech tip? You do realize that all iPhone 4S's are still under warranty, although there's a very good chance your freezer trick has tripped a moisture sensor, thus voiding your warranty. Make an appointment at an Apple store, but be prepared for bad news. Good luck.

  • Can't connect to any players on game center

    I'm able to connect to game center just not actual players.
    I purchased street fighter volt and noticed that my connection times out when attempting to connect to players. This started 3 days ago.
    Since then I tried using my other game center apps and while I can post scores I can't connect to any players for actual multiplayer matches.
    My connection just times out. It's not my wifi since I've done numerous test with other consoles and my router has open nat and port set up for gaming.
    Any ideas? Thx

    Update:
    Tested in other networks and still can't get any matches to connect. Also my iPod has no restrictions for multiplayer .
    My iPod isn't jailbroken and running 4.3.5  now.
    Anybody? 

  • Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

    I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously.  My old AE allowed this but can't make the new one work that way. 

    In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
    WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
    What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
    It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
    I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
    For Macs:
    o MacStumbler
    o iStumbler, or
    For PCs:
    o NetStumbler

  • Airport Extreme can't connect to any server

    I can't connect to any websites using my Airport Extreme, which worked fine until yesterday, everything is set up correctly and Network assistant tells me I'm connected to the internet. Every website I try to open (in Safari, Opera, and Firefox) gives me a message that I can't connect to the server, same with Mail. Everything works fine with an Airport Express or plugging directly to the modem. All of this started yesterday when my internet was down, but the airport never came back. I've tried resetting to factory defaults, and yes I've unplugged everything about 400 times. Anyone experience anything like this before?
    josh

    It sounds like when the Internet went down, the modem got "confused" and didn't remember that the 802.11n AirPort Extreme Base Station (AEBSn) was connected to it.
    Please try the following:
    o Power-down the modem, AEBSn & computers. Order is not critical.
    o While the power is off, check to see if the modem employs a backup batter. If it does, temporarily remove it, and then, replace it.
    o Power-on the modem. If it has one, press and hold the modem's reset button for at least 3-5 seconds. After power-up or reset, wait at least 10-15 minutes.
    o Power-on the AEBSn; wait at least 5-10 minutes.
    o Power-on the computer(s).
    Your computers should be able to access the Internet (& access web sites) now. Please post back your results.

  • Can't connect to any webpages with any browser

    Our Powerbook G4 can not connect to any webpages with any browser (safari, firefox, IE) but other TCP/IP applications work fine. IE, the AOL application can connect via TCP/IP, iChat and skype both work fine.
    Any idea?
    Thanks,
    Alan

    It sounds to me like either a DNS server issue, or your Mac is looking for a web proxy and not finding it.
    If you don't have the DNS server filled out in your network settings, find out the DNS IP info from an ISP and try inputting it.
    Also, click on the Proxies tab in Network Settings to see if you have a proxy configuration listed (either automatic config or manually inputted proxies per port). If you do, disable the proxies and try again. If not, see if you can get the web proxy info for where you are from either your ISP or your work place.

  • Nokia 6086 fails to connect to any wi-fi network

    My wife and I both have Nokia 6086 phones. We have been unable to connect to any wi-fi network. The phones recognise the networks but when I press the 'connect' button I get the message 'network connection failed'. I get the same result whether I'm using my home network, with appropriate security settings, or an unsecured public network. So far, neither Orange nor Nokia have been able to fix the problem. Can anyone advise how I can connect?

    I was having this problem for a while and T-Mobile told me that the wifi radio needed to be reset and the fastest and easiest way to do this was to pull the battery when the phone is up and running. Next attempt, I could get on wifi no prob.
    I was skeptical, but it worked for me. (But only after I manually backed up my important SMS to AIM through copy & paste.)

Maybe you are looking for

  • Oracle 10g Express Edition / 64-bit client

    hi all, I have Oracle 10g express edition installed on a remote Vista/32-bit machine. I installed the XE Client on a Vista/64-bit and got the following error: UnsatistifiedLinkError: ocijdbc10.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform.

  • Mac fils to Samsung TV

    Have just purchased a Samsung 40" LCD TV and want to view films stored on Mac in Itunes (also would like to play music and see photos). Ideally want the connections to be wireless. What is the best option please.

  • Problems with PSE 8.0

    Please Help: PSE 8.0 has become so buggey it is bemome unusable.  If I go dirictrlly to Organizer on sartup it will work, but if I use any other program first, organizer will not open unless I reboot the computer.  I would like to reload Elements and

  • Hey, I am getting an error in updating with 'Adobe Application Manager' "There was an error downloading this update. Please quit and try again later."

    Hey, I am getting an error in updating with 'Adobe Application Manager' "There was an error downloading this update. Please quit and try again later." Anyone able to help? Tried restarting etc. No avail. I am running Adobe CS5 on my new laptop. Any h

  • Share selected clips will not function correctly

    I have a very large iMovie with a lot of clips, each of which contains several chapter stops. If I share only selected clips to iDVD, the chapter stops are scrambled and don't correspond to where they should do. Why is this?