Can't connect to computers on the same network and same office
Hi everyone, I have this problem from some time now, I have on the same network some computers with ethernet, and some with Wi-Fi.
All are connected to the C-Net Wireless-G Router.
My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area, but I have an iMac 2.0 next to my iBook and I can't see it.
How is that possible? Am I making something wrong with the subnet mask or IP address?
All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
If anyone could give me a hand here, I will apprettiate the advice.
Thaks to everyone, Pablo from Argentina.
rccharles wrote:
All are connected to the C-Net Wireless-G Router.
My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area,
but I have an iMac 2.0 next to my iBook and I can't see it.
How is the iMac 2.0 connected? cable or wireless?
iMac is on Wi-Fi.
How is that possible? Am I making something wrong with the subnet mask or IP address?
You are on a different subnet. In x.x.x.0 the x's are different.
All the computers are in the same subnet, cable ones and wi fi ones.
All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
Look at what ip addresses you have on each machine.
I have different IPs on each machine, do you need the numbers?
Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
Macintosh-HD -> Applications -> Utilities -> Network Utility.app
Use the ping command to see what is going on. Ping 192.168.1.254, source & destination machine. 127.0.0.1 is an alias of the machine you are on.
!http://farm3.static.flickr.com/2575/4090068351_6fb8dc3d55.jpg"!
check out port scan. This will tell you if sharing is on.
!http://farm3.static.flickr.com/2506/4090068193_7566e620cf.jpg!
I will try this
Message was edited by: rccharles
Similar Messages
-
Can I connect two apple tv on same network and same apple ID at a time ?
Can I connect two apple tv on same network and same apple ID at a time ?
Welcome to the Discussion Forums.
Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though. -
Cannot connect two computers to the same game server HELP!
I have a Linksys WRT54G Router. I have two computers and I want to be able to use them on the same gaming server. Unfortunately, the game only have one port, so I can only port forward one of my computers. How can I configure my router to have two external IP addresses to the server so it won't kick one of my computers out. Thanks!
Hi,
I am in a gaming community and many members have a Linksys at home (but I don't know which kind exactly). Many of us try to connect two computers to the same server (many have a family). It seems it is a common problem that no one can connect two computers to the same game server.
I have a BEFSR41 V3 Firmware version 1.04.8
I use fixed IP address and no connectivity problem on Internet.
I have win XP SP2 on both computer.
I am using a DSL modem
I can connect the two computers to two different game servers at same time, but not the same server. Default port for this game is the same for all servers I use. I tried with both port forwarding enabled (in that case one PCs can connect the other not) or not (in the second case, whenever the second PC connects, the first one lose his connection to the server, no mater the order I try to connect my PCs).
Now the weird thing is that one member in my community just decided to throw away his Linksys router and he bought another brand (which I won't name to remains politically correct). Now, without changing anything in his PCs or his connection type, he can now play with two PC on the same server.
I am seriously thinking doing the same move. Since more and more game are now using Internet (and servers that controls piracy, $$) and family want to play together, not being able to connect two PCs on the same game server makes Linksys in bad situation from marketing point of view.
For example, in my gaming communtity, we now all know that Linksys can't handle two PC on same server, but other brand can...
Thank you in advance for your help. -
How can I uniquely identify computers on the same network/account specifically for airdrop use? When I change name on one computer under contacts it changes on all computers. I would like to change icon and name for each computer.
you would need to setup a VPN and tunnel into your office.
FYI..the default ports are 3283 and 5900. -
Can I authorize two computers withe the same iTunes
Can I authorize two computers withe the same iTunes
Yes, you can authorize two computers with the same Itunes Account.
-
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
My ipad mini is not connecting to the wifi network. I have the correct network and password chosen, but the message I get is that "unable to join". I have reset my ipad and it still says the same thing. What can I do about this?
Hey Dr kris,
Thanks for the question, and welcome to Apple Support Communities.
I understand that you are having issues connecting to Wi-Fi networks with your iPad mini. The following troubleshooting assistant may lead to a resolution:
Apple - Support - iPhone - Join a network Assistant
http://www.apple.com/support/iphone/assistant/wifi/
For more in-depth troubleshooting, refer to the following article (refer to the "Unable to connect to a Wi-Fi network):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks,
Matt M. -
Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?
Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is. -
To save my life I can't connect two computers together.
I have a G5 and an iBook G45.
They both connect to the Internet easily using my cable connection. There is a DLink router that allows both Macs to use the Internet at the same time.
But these two computers can't see each other. I've turned on file sharing and done everything else under the sun I can think of. Sometimes the IBook can see the G5 but today it has decided that the G5 server is running on the Ibook and I should access files locally.
The G5 can't see the Ibook ever.
I can use Firewire to connect easily.Hi Stu,
Can you connect from one using the ip address of the other? The Finder command cmd-k brings up a dialog for you to enter the URI of the other machine. The first part is the protocol (e.g. http, ftp, afp) the next two parts are so unused I forget what they are. The third part is the host name or address and the last part is the filesystem or file.
So if the machine you wanted to connect to was 192.168.1.10, and it had appletalk filing protocol turned on (personal file sharing) and you wanted to mount Applications, you'd enter
afp://192.168.1.10/Applications
You can leave the filesystem off. If that works, then you can connect. That means you only have the problem of seeing. Each computer is supposed to announce its services using Bonjour. There's a great utility called Bonjour Browser (free on versiontracker) which will show you what's being advertised. I have noticed that it sometimes takes a very long time before file sharing is advertised. -
iOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network, i.e. connected to the same wired/wireless router. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change this ? Means that the iPad and the Apple TV box both have to be in range of the wireless router when this wasn't a restriction before. Apple TV could be anywhere as long as it was connected to the same wireless router via ethernet cable. Seems like an unnecessary thing to restrict.
I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Can I connect two computers to one device?
Can I connect two computers to one device? I am trying to have them control different aspects of the experiment that I'm running.
That depends upon the device. If it's GPIB, you could
use the E-NET card to convert it to LAN. That would
allow control by many computers. The only problem with
that might be sychronization. That is, Computer 1 does
its setup. Then Computer 2 does a reset. Compuer 1's
setup is now gone.
As another poster suggested, you could always network
between the two computers.
[email protected] -
i can't connect to itunes store the alert error says "itunes could not connect to the itunes store. An unknown error occurred (0x80092013)"
Hi all,
I have the same problem with my Windows 8.1 laptop and my guess is that since I changed my Internet Provider who now delivers IPv6 addresses the problem occurs. A frieend who has a different provider does not have the problem in his home, but when he tries using iTunes at my home with my network he gets the same problem.
I have already solved a previous problem with Outlook 2003 not being able to receive emails from my wifes GMail account although everything else worked fine. The solution here was to enter the IPv4 address of Google POP-Server in the hosts file, overriding the IPv6 address.
Maybe something similar helps with this iTunes error.
If someone knows the hostname of the iTunes Store server, it could be pinged and the IPv4 address could be determined and then entered in the HOSTS file.
I'll continue trying in this direction and will post a solution if I find one.
If someone has the iTunes server name or IPv4 address, please post it. -
I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection. Any ideas?
Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah -
I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)
Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
My laptop died so I've installed itunes onto another PC and my music is all on an external hardive which is connected to the new PC. How can I sync my ipod with the new itunes and get all the music onto itunes?
You might consider itunes match for moving CDs you've copied into your itunes library if you dont have a way to use home sharing.
iTunes match is an optional service offered by apple that costs about $25 a year. It scans your music library and if it finds music that is already in apple's itunes catalog it'll automatically "unlock"/"store" these in the cloud for you. Items that it does not find in the catalog it'll upload and store these in the cloud for you and you can download them on your devices. See http://www.apple.com/itunes/itunes-match/
Maybe you are looking for
-
Why can't we use iTunes gift cards with family sharing? After Christmas, we now have lots of account credit we can't use. Very frustrating. There is no option found for using account credit.
-
How do I get more hard drive space for my Macbook Pro?
I am losing hard drive space and I don't know why? Is something writing or copying on my Macbook Pro? Thank you...
-
None of my iDevices can read my iTunes library after about 30 minutes. My iDevices lose connection to my library and I have to do one of the three following things in iTunes to regain connectivity: 1. Restart iTunes 2: Stop / Start Home Services 3:
-
Splitting a list (loop and insert)
I have a text file with about 65000 records to be looped and inserted into a database. I am using cfhttp to read the list and turn it into a query. I am then using that query to loop and insert the records into a database. However, its too large and
-
Wanted to install the blackberry device on my mac??
Hey there! Does the blackberry device cdrom (blackberry user tools?) work with macs? Because it shows up but when I try to launch it nothing shows up. Thanks -Kayla Message Edited by kutikayla on 09-09-2008 12:22 AM Solved! Go to Solution.