Can't connect to Dell server but everyone else can

These are the error masages I get when trying to login to server: "The Finder cannot complete the operation because some data in "smb://192????/" could not be
read or written. (Error code -36)."
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
I have no problem to connect to internet.
Thanks
HALINA

I had the same thing happen with a HP MediaSmart Server

Similar Messages

  • B50 touch: unable to connect to school wifi, but everyone else can.

    Help!!! This is the first time it's happened to me. I can't connect to the wifi but everyone here at school can. I tried disabling the connection, enabling & even restored my computer to an earlier date. None of this worked!!

    Hi Stephamazingg,                           
    Thank you for the reply, I apologize for the delay in reply.
    As per the query we understood that you are facing the issue with WIFI in your B50 touch laptop.
    Please reinstall the WIFI drivers and check for the issue, click here for the drivers if the operating system is windows 7.
    Click here for the drivers if the operating system is windows 8.1.
    Check if the wireless Lan is enabled in BIOS.
    Hope this helps! Do post us back for further queries.
    Best regards,    
    Ashwin.S   
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hello people I can't connect to my wifi yet everyone else can, how come? Many thanks

    My IPhone 4s won't connect to my wifi yet everyone else can connect to it. Everytime i try connect to my wifi it just shows the little loading symbol and doesnt give the blue tick. Have I pressed something under the wifi settings for this possibly to happen. This is very frustrating as I can't FaceTime either. Many thanks to the feedback I recieve upon this.

    Try rebooting the router. Whether or not it is working with other devices does not matter.

  • Email intermittently says it can't connect to the server but connection doctor says I'm connected

    I have both my Yahoo and work email accounts on  my MacBook Pro. Intermittently, my work email refuses to send, giving me the error message that it can't connect to the server. Connection doctor says work email is connected to the internet, and some emails will go while others won't. Have checked server settings agains my Iphone, and they are identical. No problem emailing from the phone. Help?

    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • Safari can't connect to the server, but firefox can

    i have a few websites (mainly google sites) that don't show with safari but they do with firefox
    i'm getting a "Safari can't connect to the server" error
    to take DNS out of the picture i am looking up the ip address for the server and use the ip instead of the domain name so
    http://74.125.19.103/images?client=safari&rls=en-us&q=test&ie=UTF-8&oe=UTF-8&um= 1&sa=N&tab=wi
    works in firefox but not in safari
    any ideas are more than welcome.
    thanks,
    tom

    Hello Tom:
    No I meant restart the computer. OS X rebuilds preference files as needed, but I am not sure what it does if you do not restart.
    You could also reset Safari (that will also delete your cookies).
    Just for the heck of it I would also run permission repair and also run repair disk from your software install DVD (those will probably not fix anything, but it does not take much time either).
    Barry
    Barry

  • MacBook Air can't connect to iMac network, but other computers can

    This one has been driving me absolutely batty.
    I have 4 computers on our network – a mini, iMac, Macbook, and Macbook Air. Screen and file sharing works great except everywhere except between the iMac and Air, which can't do anything with each other. They show up in each other's "Devices" list in the Finder, but trying to connect over any port, pinging, etc. doesn't work.
    I've tried turning off the Firewall, changing IP addresses and dns settings, rebooting, turning off ipv6, creating new user profiles on both machines, and just about anything else I can think of. What am I missing
    Thank you kindly for any help you can provide!

    That's been one of the more difficult parts – no connections work over any protocols/ports that I've tried, whether via browsing or Connect to Server..., though something is working (UDP?) to allow both computers to see each other in the devices list in the Finder.
    It happened just now. I was working on the Air and had mounted the iMac. It worked fine for about 15 minutes and then I suddenly got the pinwheel of death when trying to access the mounted iMac volume. Hanging, hanging, hanging, so I relaunched the Finder. Now I can't access the iMac at all (except, again, to see it in the devices list).
    Here are seemingly related messages in the console (note that there is 1.2 TB unused on iMac and 11 GB unused on Air). It's showing some kind of file system error. Guess I'll run fsck and see what happens.
    Thanks again for your help!
    3/2/11 9:44 PM KernelEventAgent[37] tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
    3/2/11 9:45 PM hdiejectd[5532] quitCheck: calling exit(0)
    3/2/11 9:58 PM quicklookd[6053] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Volumes/jed/Documents/lost/food.eps>' (Start date: 2011-03-02 21:57:41 -0500)
    3/2/11 9:58 PM KernelEventAgent[37] tid 00000000 received event(s) VQ_NOTRESP (1)
    3/2/11 9:58 PM KernelEventAgent[37] tid 00000000 type 'afpfs', mounted on '/Volumes/jed', from 'afp_0X76lf1xMNqb4yHcGc0cKW9p-1.2d000006', not responding
    3/2/11 9:58 PM KernelEventAgent[37] tid 00000000 found 1 filesystem(s) with problem(s)
    3/2/11 9:58 PM kernel ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x70cab28
    3/2/11 9:58 PM kernel AFP_VFS afpfs_DoReconnect started /Volumes/jed prevTrigger 0 currTrigger 1
    3/2/11 9:58 PM kernel AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/jed
    3/2/11 9:58 PM kernel AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/jed
    3/2/11 9:58 PM kernel AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/jed
    3/2/11 9:58 PM kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/jed
    3/2/11 9:59 PM kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/jed failed 60.
    3/2/11 9:59 PM kernel AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/jed
    3/2/11 9:59 PM kernel AFP_VFS afpfs_DoReconnect: connect on /Volumes/jed failed 60.
    3/2/11 9:59 PM kernel ]
    3/2/11 9:59 PM kernel AFP_VFS afpfs_DoReconnect: posting to KEA to unmount /Volumes/jed
    3/2/11 9:59 PM kernel ASP_TCP CancelOneRequest: cancelling slot 0 error 89 reqID 6337 flags 0x29 afpCmd 0x3C so 0x70cab28
    3/2/11 9:59 PM kernel ASP_TCP CancelOneRequest: cancelling slot 1 error 89 reqID 6338 flags 0x29 afpCmd 0x22 so 0x70cab28
    3/2/11 9:59 PM kernel ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 1 on so 0x70cab28
    3/2/11 9:59 PM kernel AFP_VFS afpfs_DoReconnect started /Volumes/jed prevTrigger 1 currTrigger 2
    3/2/11 9:59 PM kernel AFP_VFS afpfs_DoReconnect: already in unmount /Volumes/jed
    3/2/11 9:59 PM kernel
    3/2/11 9:59 PM KernelEventAgent[37] tid 00000000 received event(s) VQ_DEAD (32)
    3/2/11 9:59 PM KernelEventAgent[37] tid 00000000 type 'afpfs', mounted on '/Volumes/jed', from 'afp_0X76lf1xMNqb4yHcGc0cKW9p-1.2d000006', dead
    3/2/11 9:59 PM KernelEventAgent[37] tid 00000000 found 1 filesystem(s) with problem(s)

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • My ipod touch connects to wifi but can't connect to the server.

    Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
    I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
    Thanks for your time

    Have you tried restoring your iPod touch in iTunes?
    You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
    If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
    Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
    -Messymeese
    Über Enbonpoint Pangolins FTW!

  • A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can't connect to the server.I uninstalled and installed Firefox but it isn't working.

    A toolbar called Searchqu got installed in my web browsers.I uninstalled Mozilla Firefox without removing the toolbar and it stopped working saying that can’t connect to the server.I uninstalled and installed Firefox but it isn’t working.

    See this thread for potential ways of removing Searchqu from your system: https://support.mozilla.com/en-US/questions/790833

  • I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can

    I keep getting a message pop up the first time I open Photoshop CC for the day, "we sorry, we can't connect to adobe server at this time...I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can be done?

    Moving this discussion to the Creative Cloud Download & Install forum.
    R.O.B. please see Sign in, activation, or connection errors | CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for information on how to resolve the connection error between the computer and our activation server.

  • TS4062 my ipod touch shows it is connected to internet, but says it can't connect to the server.  Help!

    My ipod touch shows it's connected to the internet, but says it can't connect to the server.  How can I fix?

    The machine is booting up so I wouldn't worry about the PRAM battery.  I set my time off of the internet, since my pram battery is dead & I do not feel like changing it.  click on time to get this panel.
    The imac I have has 1.25GHz and I am assuming has an airport card because the Internet worked on it when I tested it out before I bought it.
    To sort things out, I'd connect the machine via an ethernet cable to you router. Thus, if it works well via a cable you will have narrowed the problem down to the wifi card.
    My wireless is on WPA/WPA2. How do I get the Internet to start working?
    You sure the machine is connecting to your router not a neighbors?  Set router to now encryption & see how things work.  Just for testing.

  • RF's can't connecting to terminal server.

    Hello,
    I having trouble with my new terminal server. I am using RF's (intermec & motorola) in my business and We have two terminal servers that is running with 2008r2 standard. RF's can connect to first terminal server unproblematic  but can't connect
    to other one and getting error as "Because of a security error, the client could not connect to the remote computer, verify that you are logged on the
    network, and then try connecting again"
    I can connect to all terminal servers with my domain computer via remote desktop connection.
    Own enterprise network has PEAP-WPA2 user authentication
    Rf's are not in the domain.
    I need help from you.
    Thanks.

    Hello everyone,
    We found a solution regarding this case with microsoft team. Solution is in the following.
    Issue Statement:  
    Cannot connect RF scanner to a particular server using RDP.
    Symptoms:
    > The RF scanners are Intermec CK3R devices with windows embedded handheld 6.5 classic installed on them. They fail to connect to
    a particular server using RDP. However, same user and device can successfully connect to another server. The server to which the device fails to connect is TRKKTA01-N.
    > Never been able to connect to the problem server.
    > Both the good and the bad server are Windows 2008 R2.
    > The Devices are connecting using per user licenses.
    > We can connect to the problem server using a Fat client like Windows 7 machine with the same user ID.
    > both the Problem server and the working server are in the same network but on different VLANs.
    > On the Scanner, when trying to RDP user gets the following error:
    "Because of a security error, the client could not connect to the remote computer, verify that you are logged on the network, and
    then try connecting again"
    > Already different encryptions have been tried but the connection still fails.
    Environment:
    RDS server is Windows 2008 R2. Clients are Intermec CK3R devices and OS is Windows embedded handheld 6.5 classic. 
    Scope Agreement:
    We will close the case once we find the cause of the RDP failure and provide a possible fix for it.
    If the problem is found to be due to third-party code we will provide information to substantiate this. 
    Case Status:  Resolved.
     Steps used to resolve the issue were:
    1. Create the following reg key on the license server:
    Use512LenPropCert on the Server
    Subkey: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM
    Registry entry: Use512LenPropCert
    Data type: REG_DWORD
    Value: 1
    2. De-activate the license server
    3. Re-activate the server using the telephone method
    4. Delete the x509 cert keys from the terminal servers
    Best Regards,
    Ufuk BAYGIN

  • Oracle9iAS(9.0.2.0.1) Can't connect X11 Window Server Using localhost:0.0

    Hi, everyone:
    I have installed the Oracle9iAS(9.0.2.0.1), at the first time installation, every thing is succeed in Miracle Linux 2.0, but after i reboot linux pc, then
    #$ORACLE_HOME/bin/emctl start is also succeed,
    unfortunately after i connect to that pc by 1810 port,
    it display a web page with the message of
    Servlet error: Renderer failed:
    java.lang.NoClassDefFoundError can't connect X11 window
    server using 'localhost:0.0' as the value of the DISPLAY
    variable
    why, and how to solve this problem, thanks in advanced

    Check out the support matrix for deploying to different versions of OracleAS.
    http://otn.oracle.com/products/jdev/htdocs/9.0.5.1/install.html#supported
    Following how-to has an FAQ which has details about invalid servlet path error.
    http://otn.oracle.com/products/jdev/howtos/appservers/deployias.html#faq
    raghu
    JDev Team

  • How can I connect to SQL Server CE?

    Hi!
    How can I connect to SQL Server CE ?
    Any idea?
    I found jdbc driver for SQL Server 6.5,7.0,2000.
    But no driver for SQL CE.
    Thanks for any suggestion....

    I am also searching for same answer.
    I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
    I am stuck in driver problem. I can't find that.
    Should I use Oracle Lite or PointBase?
    I am under a lot of stress... like you've been...
    I wish you find and post that....

Maybe you are looking for