Can't connect to DFS shares from machines not part of the domain

I'm not sure if this is by design, but we can't connect to DFS shares from machines that are not joined to the domain. We can't even map a drive using credentials of a domain account.
Is that how DFS is supposed to work?

Hi RJO22,
I did some research on this topic, and got a conclusion:
Clients that belong to a workgroup can only access the DFS namespace if the name resolution mechanism that is in place can locally resolve the domain name
https://social.technet.microsoft.com/Forums/windowsserver/en-US/c3214a4c-8088-446c-ba4d-643d5baf87cc/how-to-access-dfs-namespace-from-a-standalone-windows-2003-server
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Can only connect to smb share from Windows as "nobody"

I'm trying to share some folders on my Mac using samba. When I connect from Windows, I do not get asked for a username and password, and I get connected as a guest user (nobody). What do I do to get connected as a real user? I've tried playing with /etc/smb.conf, but I'm not sure what to change.

when you enable smb in haring system preferences on your mac, did you check the box to enable smb on a specific account?
if you did, when you initiate smb from windows try entering
smb://[email protected]
instead of
smb://mac.ip.address

Unable to connect to DFS shares

I know it is a known issue in Windows 10, that it is not possible to connect to DFS shares. Can we expect any hotfix for this soon? Because to be able to test Windows 10 in a enterprise, it is essential to be able to connect to a DFS share (at least in
my case :) )

Hi Richard Diphoorn,
From the following news:
As with the last build, you’re getting hot-off-the-presses code which means there are a few issues. We’ll be publishing WU updates shortly to fix the first two, but the remainder will not be fixed for 9879.
•In some cases you may get a black screen when trying to log-in or unlock. The only option is to hold the power button to hard reboot.
•You will be unable to connect to Distributed File System network locations.
•Some systems may see disk growth of 20GB+ due to driver install duplication. On systems with low disk space this can block setup and cause a rollback to the previous build.
•Skype calls will disconnect and Music will stop playing if those apps are minimized.
•There are several known issues with screen sharing with Lync.
There should be newly update released to fix this issue. You can try the newest update which released in 11.24:
https://catalog.update.microsoft.com/v7/site/Search.aspx?q=KB3019269
Alex Zhao
TechNet Community Support

"Can't connect to a current Time Machine back up disk"

OS X Yosemite, version 10.10.1
Macbook Pro (Retina, 13-inch, Late 2013)
Processor 2.6 GHz Intel Core i5
Memory 8 GB 1600 MHz DDR3
Computer is supposed to seamlessly back up to Time Capsule via wi-fi, but ever since upgrading to Yosemite it's been broken. "can't connect to a current Time Machine back up disk" is the message that pops up, just after it shows me the files on my Time Machine for a split second. So it sees them, for a moment, then it pops up the message and freezes my computer. I have to do a hard reboot. I tried the instructions here: OS X Yosemite: If Time Machine can’t find your backup disk, and various instructions I've found on the internet regarding fixes from deleting plist files to whatever.
This is very annoying, I'd like to fix the problem. And also vent, this *****, this isn't why I purchase Apple products, it's a known problem and they aren't publishing a fix. Apple isn't very elegant anymore, it's cumbersome, troublesome, and I'm wondering why I'm spending the extra when those were the benefits I was paying for.

Apple isn't very elegant anymore, it's cumbersome, troublesome, and I'm wondering why I'm spending the extra when those were the benefits I was paying for.
Don't upgrade next time until the following version is out.. I updated not long ago to Mountain Lion.. and it works very nicely. Apple is playing MS game.. don't fix the problems.. just release a new fangled OS. So issues that have existed over Mavericks and all its updates are still there and in fact exacerbated in Yosemite.
To fix your issue.. You may need to do some major work.. did you upgrade or clean install Yosemite??
I guess it is too much to ask if you still have your previous OS install intact?? Making a bootable clone before updating is a necessity now IMHO.
TM does not really allow you to go back to the previous OS.. but you can clean install Mavericks or whatever you used and then recover your files.
To fix Yosemite a clean install can be a big help. Especially as wireless is a major flaw.
Do you own the thunderbolt to ethernet adapter? It is like $35 and a well worthwhile gadget to own.. since I think your mac has no ethernet port.
See if it works ok by ethernet.
Otherwise factory reset the TC and try mounting it manually in finder by IP address, not name.
ie in Finder use Go, Connect to server and type in the IP.. thusly
SMB://10.0.1.1 (replace with actual IP)
It is a bit tricky if the IP is not static.. but start there and see what happens.
Remember to save the password to the TC in the keychain when asked.

Can I connect Azure SQL Database from Project Siena ?

Can I connect Azure SQL Database from Project Siena ?
I want to connect Azure SQL Database of Office 365 SharePoint's Access App from Project Siena.
Access App's Database is Azure SQL Database.
and can connect to Excel/PowerBI/etc.
Access App's Database can connect from specific location / any locations.
Access App's Database can allow read-only connection / read-write connection.
I want to create Windows App connected to Access App's Database.
Regards,
Yoshihiro Kawabata.

Hi Yoshihiro,
Could you share more with us about the high level scenario for what you are trying to accomplish offline? We can discuss further at
[email protected]
Once we are done, we will definitely share our findings with the community.
Thanks!

How can I connect to a database from ipaq with cldc??

how can I connect to a database from ipaq with cldc??

Hi Again
There is a library by Mimer which allows you do connect to a Mimer SQL Server, don't know must about it, but here is a link.
http://developer.mimer.com/
If that doesn't suit you, I suspect that you will have to use some sort of proxy solution. Either by creating a servlet to accept the sql string you want to send, or by creating your own custom proxy server running J2EE. The servlet or the proxy server must be able to receive an SQL String, do the query to the actual database and return the results in some sort of format to the mobile device. Maybe just a space delimited string.
Hope this helps
-Daur

How can i connect my bookmarks links from Firefox, to favorites (location) start button then favorites?

''dupe of https://support.mozilla.org/en-US/questions/915455''
How can i connect my bookmarks links from Firefox, to favorites (location) start button then favorites?

*Plain old favorites: https://addons.mozilla.org/firefox/addon/plainoldfavorites/

I bought a ipod touch from someone on craigslist, but he never gave his password, so I can't connect it to itunes to restore it, he had the box and everything, what do I do?

I bought an ipod touch from someone on craigslist, but he never gave his password to me, and I can't get back into contact with him, so I can't connect it to itunes to restore it, he had the box for the device, so he was legit, so what do I do?

Place the iPod in recovery mode and then restore the iPod via iTunes on the computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Can't connect to airplay speakers from iTunes

I suddenly can't connect to airplay speakers from iTunes on my new Macbook Pro - they are visible but cannot be selected. I can connect to them from other Macs and iPads. Can anyone help, pls? I have set the whole network up several times, rebooted system ie.

I had this happen to me on the odd occasion but now have it sorted. If I'm going to use my Airport Epress(s) I first make sure that my PC is connecting to the AE before I even turn on iTunes.
A problem I was having was that my PC was connecting to my wireless router by default (specifically when my laptop was turned off) and not to the AE. As a consequence when iTunes started it greyed out the remote speakers and sometimes the button was not even showing up.
Now that I ensure my PC is talking to the AE everytime I do not have a problem.
I do have one annoying thing with the AE setup though, if I'm playing music over the AE and I unplug any USB device (printer, USB Key, External drive etc) the wireless connection is broken and I have to start iTunes. I suspect it is a hardware issue relating to my particular HP PC as I have just reformatted and reinstalled Windows XP and it still happens. I can live with it.

Can`t connect to business catalyst from within Dw. How to fix??

Can`t connect to business catalyst from within Dw says there is a server error but internet connection good. Need to publish asap please help !! Was working fine earlier in the day but now refuses. Have tried Muse as well but it can`t reach Bc as well........

Business Catalyst System Status
BC Status
System Updates Forum
Nancy O.

I can't connect to iTunes store from my new iPad 3

How can I connect to iTunes store from my new iPad 3

It's still isn't connecting to iTunes Store. but I'll continue to wait on their servers

How can I connect my Ipad Air to my PC to see the Ipad screen on the PC? I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. Thanks

How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! Regards

Hi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards

Can we open a URL link from an RFC and access the data in the link.?

Can we open a URL link from an RFC and access the data in the link.
I have the following scenario.
I have a URL link and it opens a KM folder in the Portal server and I need to put a PDF file in that KM folder
Can we do that with the help of an RFC, can we deal with Links in RFC, is there any such FM??
Regards

>
SAP LEARNER wrote:
> Can we open a URL link from an RFC and access the data in the link.
>
> I have the following scenario.
>
> I have a URL link and it opens a KM folder in the Portal server and I need to put a PDF file in that KM folder
>
> Can we do that with the help of an RFC, can we deal with Links in RFC, is there any such FM??
>
> Regards
I guess you are trying to connect from the R3/ECC to the Portal Server.
Are these two systems in the same network? Do you have usernames (valid and fully authorized) in both systems? What is the OS on which these two systems are housed?
Please provide these details to proceed further.
Regards
Sabu

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.(Font.java:298)
     at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
that has to be a first.
If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
<hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
export DISPLAY=hostname:0
where hostname is the name of the host running an XServer and the .xhosts file allows access to the
XServer from the display client.
Apparently, you are not at the console?
Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
Bill
"D. Alvarado" wrote:
Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Font.initializeFont(Font.java:264)
at java.awt.Font.(Font.java:298)
at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

In this case you won't be able to do that?

Can't connect to DFS shares from machines not part of the domain

Similar Messages

Maybe you are looking for