Can't connect to essbase in Config Util when trying to config Pln Datsource
Hi,
getting the following in the configtool.log:
(Nov 20, 2009, 08:35:22 AM), com.hyperion.planning.HspDSEssbasePanelManager, DEBUG, Testing essbase connection HspJSHomeImpl.hspJS.TestEssConnection()
it hangs for hours after this. I can connect in eas and ping the server. tried using the IP as well? Any thoughts?
Hi,
Thanks for the reply.
Essbase seems to be running OK. I stopped the process and started it again via start menu.
This is what it writes to log file
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Oct 11 16:30:46 2011]Local/ESSBASE0///Info(1051051)
Essbase Server - started
Earlier in the log file we can see this:
[Tue Oct 11 10:55:08 2011]Local/ESSBASE0///Error(1042010)
Network Error [10048]: Unable to Bind Host Server Socket On Port [1423]
We still get the same error from EAS console.
Cheers,
Mari &Jarkko
Similar Messages
-
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
Windows laptops can't connect to Macbook Pro shared internet when WEP security is on
As the title states, my Windows laptops can't connect to Macbook Pro shared internet when WEP security is on. My iPhone has no problem asking for the password when I try to access the shared internet my MacBook Pro on Mountain Lion is sending, but my Samsung Slate on Windows 8 sees the network and only succeeds in connecting when no password is required. When security is on, it just tries for a moment and says it can't connect to the network without ever prompting me for the password. The same thing occurs on my Asus Netbook running Windows XP. Since all the reviews about OS X's internet sharing mentions "any wifi device" can access it, I haven't assumed it's only compatible with Apple products. I want my MacBook Pro to save me from needing an external router.
I would post a new question, outline the specific problem you are having and skip all the extra. Outline any steps you have taken already to try and solve the problem. Post the question in the forum most likely to have followers who can answer your question. Give your topic a good title such as: My MacBook Pro cannot connect to my WEP-enabled PC.
Provide any hardware information that may be relevant such as the make and model of your router and method of connection - wired or wireless.
I'm no authority, but have you tried using WPA2/Personal on your PCs? This method is most compatible with Macs.
If the WEP password is a hexadecimal password then on the Mac you need to preceed the number with a $ sign or the hex digits, 0x.
These links may be useful:
AirPort- Joining an encrypted WEP or WPA Wi-Fi network
AirPort Express- Difficulty joining 3rd-party network that is using WEP -
I can't connect to the iTunes store with my Apple TV. I can see what movies are on offer but when trying to access my account i am advised "Can't connect to server" (times out).
I have the same problem with my 3rd gen Apple TV. I can preview iTunes movies, stream from my Mac, Airplay from my other devices but I cannot rent a movie on iTunes. Every time I try I get "Can't connect to ITunes" and "Unable to sign in". Had technical support review the problem over the phone and they agreed to send me a new one. Same problem. Interestingly enough my 2nd gen Apple TV works just fine.
-
2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2
2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2
You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update. -
Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik -
Hi all,
we installed today Essbase 11.1.1.3 on 64-bit Windows. We are not used to install Essbase but everything went fine and we got everything installed normally. When we try to connect to Essbase Administration Services, we get following error:
Network error [10061]: Unable to connect to [172.17.17.62:1423]. The client timed out waiting to connect to Essbase Agent using TCP/IP.
We have tried:
- path variables
- sec-file change
- restarting several sevices, including java
- server name instead of ip-address
- checked hosts- and services-files
This is probably some kind of configuration problem, agent is down or something but we just don't know what we should do to get rid of this message.
Thanks in advance,
Mari & JarkkoHi,
Thanks for the reply.
Essbase seems to be running OK. I stopped the process and started it again via start menu.
This is what it writes to log file
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051283)
Retrieving License Information Please Wait...
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051286)
License information retrieved.
[Tue Oct 11 16:30:45 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Oct 11 16:30:46 2011]Local/ESSBASE0///Info(1051051)
Essbase Server - started
Earlier in the log file we can see this:
[Tue Oct 11 10:55:08 2011]Local/ESSBASE0///Error(1042010)
Network Error [10048]: Unable to Bind Host Server Socket On Port [1423]
We still get the same error from EAS console.
Cheers,
Mari &Jarkko -
Can't connect to DB via Config DB
Using 4.01/Sybase and NWSB6.5SP3
When trying to 'config DB', after I choose it, it jsut waits and waits.
I can cancel as it doesn't hang machine. but can't get connected to
the DB.
any ideas?On Thu, 16 Jun 2005 17:21:35 GMT, JeffB wrote:
> When trying to 'config DB', after I choose it, it jsut waits and waits.
> I can cancel as it doesn't hang machine. but can't get connected to
> the DB.
>
> any ideas?
is the database object configured correctly?
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net -
9i can't connect to a data base, even when I use another user's tnanames.or
I can't connect to a data base, even using tnsping with a tnanames.ora file that I copied from a user's PC that was able to connect. It's a new install of 9i on my PC. What did I miss? I'm on a Win 2000 box and Oracle is on a UNIX server.
Here's the description from the tnsnames.ora file:
HISTA02A =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = bkodv1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = HISTA02)
The file is from the previous version 8.1.7, should that matter? 9.2.0.1 is the server now.Yes, I even pinged it to make sure. When I do a tnsping HISTA02 I get :
C:\>tnsping HISTA02
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 28-FEB-2007 14:25:53
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
C:\Local\network\ADMIN\sqlnet.ora
TNS-03505: Failed to resolve name
My SQLNT.ora looks like this:
# SQLNET.ORA Network Configuration File: C:\orant\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
NAMES.DEFAULT_DOMAIN = cboent.cboe.com
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME) -
I just got an iPhone 4s, and I can not connect it with my iTunes from my previous account. I have already tried making another account, however it says that I have the wrong security code even though this is not true. What should I do?
Contact iTunes support. There's a link to it on the bottom of every page in the iTunes store.
-
Can not connect to Time Capsule hard drive when I am not on its network.
If you can help me, I will be forever grateful!
I had a airport extreme with a hard drive that I used to back up my computer and to access my files when I am on the road. (Everything worked perfectly)
I switched to the Time Capsule.
I am now unable to connect to my Time Capsule drive when I am on the road.
I get this message: The server "time capsule name"may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
Some notes:
-I am using the same exact modem at home I have been using this whole time
-I am connecting using the same connection I did when I connected with my airport extreme
-I can connect to mobileme
-My mobileme name and password are in the advanced options in the Capsule
-My firewall is OFF
-My back to my Mac option is ON in Mobileme preferences
-I have the most up to date OS package
-I have the most up to date capsule version
PLEASE HELP!Hey,
I have excaly the same problem.
In my case, i can connect remotely to my mac mini at home, but not the time capsule.
Anybody have any suggestions ? -
Can't send Email: Error 500 or 403 when trying to use SP.Utilities.Utility.SendEmail
Hi all,
I am getting a Internal Server 500 error when trying to send an email using the SP.Utilities.Utility.SendEmail in my SharePoint Online App. It is worth noting that I am working from a custom .aspx page that does not inherit from the Masterpage, and using
AngularJS (thus the $http).
If I change the urlTemplate to use the hostWeb instead of the AppWeb, I get a 403 forbidden. Is there a library I need to include since I am using a custom.aspx page instead of the default.aspx page that comes when creating an App?
Any clues?
var appweburl = decodeURIComponent(getQueryStringParameter('SPAppWebUrl'));
var urlTemplate = appweburl + "/_api/SP.Utilities.Utility.SendEmail"; $http({
contentType: 'application/json',
url: urlTemplate,
type: "POST",
data: JSON.stringify({
'properties': {
'__metadata': {
'type': 'SP.Utilities.EmailProperties'
'From': [email protected]',
'To': {
'results': ['[email protected]']
'Body': 'Hello',
'Subject': 'remember'
headers: {
"Accept": "application/json;odata=verbose",
"content-type": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
}).success(function(data, status, headers, config) {
$scope.data = data;
alert("Email Sent!");
}).error(function(data, status, headers, config) {
$scope.status = status;
alert("Email FAil!");
Personal Blog: http://thebitsthatbyte.comI've got it working in SharePoint Online/SharePoint App using the following. Note that I am using AngularJS:
function sendEmail() {
var appweburl = decodeURIComponent(getQueryStringParameter('SPAppWebUrl'));
var urlTemplate = appweburl + "/_api/SP.Utilities.Utility.SendEmail";
$http({
contentType: 'application/json',
url: urlTemplate,
method: "POST",
data: {
'properties': {
'__metadata': {
'type': 'SP.Utilities.EmailProperties'
'From': '[email protected]',
'To': {
'results': ['[email protected]']
'Body': 'Good Day from the App. Dont reply if this was received.',
'Subject': 'App says hello and is awaiting your review'
headers: {
"Accept": "application/json;odata=verbose",
"content-type": "application/json;odata=verbose",
"X-RequestDigest": $("#__REQUESTDIGEST").val()
}).success(function(data, status, headers, config) {
console.log("Sent!");
$location.path('/');
}).error(function(data, status, headers, config) {
console.log("fail");
function getQueryStringParameter(param) {
var params = document.URL.split("?")[1].split("&");
var strParams = "";
for (var i = 0; i < params.length; i = i + 1) {
var singleParam = params[i].split("=");
if (singleParam[0] == param) {
return singleParam[1];
Personal Blog: http://thebitsthatbyte.com -
TA24260 I can not connect to itunes store! I have tried everything. help
Keep getting error message and can not connect to itunes store.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Can I connect keyboard/mouse to shutdown Win2K when I dod not connect it during bootup?
I would like to bootup even keyboard/mouse is NOT connected, but the problem is I cannot use keyboard after then. Can I connect and use keyboard/mouse when I did not connect them during bootup?
When using Windows 2000 with default startup options, it will always check if a keyboard and mouse are connected or not. If it cannot find either of them it will give you a warning.
If you boot the computer without a keyboard nor a mouse connected to it, it will not load the necessary drivers and you will not be able to use either one of them after boot up. However, you can boot with a mouse and keyboard connected, and then remove them. This way you will be able to re-connect and use them again later on.
You could also use a keyboard/mouse emulator to start up your system. You will have to check with the provider of the emulator if this solution allows you to connect and use a normal mouse and keyboard after boot up.
You could also try to find out how to c
hange registry entries of Windows 2000, so it boots up without checking for neither mouse nor keyboard, and logs in automatically. This way you would not need a keyboard/mouse emulator, and you could try using a USB keyboard and a USB mouse. Windows 2000 offers native support for USB devices and they are hot swappable.
For this last option, keep in mind that only PXI-8176 and PXI-8175 controllers have 2 USB ports. PXI-8174 controllers have only one USB port, as some other older controllers, such us PXI-8170 and PXI-8156B.
Hope this helps,
Claudia Lorente
Applications Engineer
National Instruments -
Can no longer see my I-photo photos, when trying to insert photo into Word Document.
I had some computer problems and did upgrade to Snow Leopard from Leopard. Using older MacBook Pro.
Now, when I try to insert a picture into a Word Document, I cannot see my photos!
I am working in a word document, I choose "Insert Photo from my files" and when the window comes up so I can choose the photo to insert... when I select the "photos" choice under the Media section on the Left side of the box that comes up, the box to the right is BLANK, both on the top and bottom! None of my photos come up for selection.
This method to choose photos to insert into documents used to work before... now it is not. After selecting "photos" all my photos would appear in the right box, and I would move through my I-photo events to choose my saved photo and insert it. Yes, photos are showing and present in I-photo. They just won't appear for importing.
This is so frustrating, not to mention time comsuming trying to figure out what is going on and how to fix it.
Can anyone help? Please?Oroilore-
I do not see a way to disable the Picture Frame icon. I looked at Settings-Picture Frame, but none of the options turns it off. The only way I can thinik of, would be if all of your photos had been deleted. If there were no photos, you couldn't have a slide show!
One thing to try is to reset (reboot) your iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred
Maybe you are looking for
-
Blue screen error when connecting an ethernet cable
I have a Compaq Presario 5300US desktop that I'm trying to upgrade. It has 512mb (max) of memory and a newer video card than the factory one. I installed Vista Home Basic on it with no problems. I also installed a pci ethernet card along with the
-
Help! I get a 'cannot connect to iTunes Store' message....
Every time I try to purchase an item and/or download updates from App Store for installed iPhone apps I keep getting a 'Canot connect to iTunes Sore' message. On top of that, every time I try to sign in on my iPhone, I get just about half way thru wi
-
Class not found error for applet.
This is probally a really simple mistake but I've tried everything and can't find it. My applet works fine with applet viewer - I'm running it from JBuilder. But when I open my html file in the browser it gives me a 'Class not found' error. I've trie
-
Help. I don't know what to do. I need this computer for college courses.
-
Iphone 4s not actually charging while it is plugged in
I plug my phone in and it says it is charging but the battery is actually dieing and not charging. Ive tried charging it through multiple outlet, how can I fix this problem?