Can't connect to Exchange 2003 SP2 using BIS

Hi,
I'm a network administrator for a small company. We have a user with a Blackberry 8830, and they'd like to access their Exchange account from the device. We're running Exchange 2003 SP2.
I attempted to set this up on the Blackberry and got the following error:
"Cannot connect to email server or invalid server name. Please verify the Outlook Web Access URL. If the error persists, contact antarcticadigital.com (your email provider)."
The user received an email with the following info:
Your attempt to configure the BlackBerry Internet Service to deliver mail to your BlackBerry device from this email account was unsuccessful. This email provides instructions to help with the email account set up.
You submitted the following information:
Account Type:
Outlook Web Access
Email Address:
[email protected]
User Name:
connectusdirect\person
Password:
****** (For security the password is not displayed.)
Mail Server:
https://mail.xyz.com/exchange/
[removed personal information]
For historical reasons, our Windows domain name is connectusdirect, while the email domain is different (antarcticadigital.com).
I've set this up before when I had a blackberry of my own, and it worked OK for me - so I'm not sure why we're having a problem with this user's account.
On our mail server, I'm seeing the following in the IIS logs for the OWA site. These are coming from a RIM-controlled IP:
2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 410 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 456 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 387 640 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /EWS/Exchange.asmx - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1753 832 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 376 823 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 874 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1848 1058 93
2010-05-03 19:52:02 W3SVC1 192.168.3.23 GET /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 148 78
2010-05-03 19:52:02 W3SVC1 192.168.3.23 GET /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 194 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 302 0 0 383 378 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 158 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 204 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1848 388 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 401 2 2148074254 357 219 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 401 1 0 345 265 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 200 0 0 1485 449 78
2010-05-03 19:52:03 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak/ - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) sessionid=af524a8e-7c18-4926-a10e-803bf5cc70f8:0x0 - mail.antarcticadigital.com 404 0 0 387 472 78
Does anyone have any ideas?
Thanks,
Richard

Hello,
I don't have any ideas yet but can chime in with "me too".
A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

Similar Messages

Can't connect to Exchange 2007 SP2 server

When I try and set up a new Exchange account to our internal Exchange 2007 server I get the following error message:
"The Exchange Server '<server name>' doesn't have the minimum required version installed. To use Mail with Exchange, the server must be running Update Rollup 4 for Exchange Server 2007 Service Pack 1 or later. Contact your server administrator.'
in spite of Service Pack 2 being installed on the server.
Exchange Web Services are running as expected at the URL '/EWS/Exchange.asmx'.
If anyone has suggestion on how to diagnose the exact problem I would very much appreciate the assistance.
N.

Hello,
I don't have any ideas yet but can chime in with "me too".
A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

Single Inbox on Unity Connection 8.5 and Exchange 2003 SP2

Hi,
We have Unity Connection 8.5 (with SU2) and Exchange 2003 SP2
We want to setup the Single Inbox feature that works well with Exchange 2007 and 2010, but my customer is running Exchange 2003 SP2.
We met all of the requirements outlined in: http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp459928
I configure a new "Unified Messaging Services" profile for Exchange using Exchange 2003 and enabled for Single Inbox. When I run "Test" it displays the following errors (other validation is successfully)
The service port for IMAP is not functioning.
The system failed to connect to the server with a socket connection through port beatles.clubone.com:993. The error is error:0200206F:system library:connect:Connection refused. Refer to the tomcat log file for more details. If you are using secure connection, confirm that SSL is enabled on the server.
Why is it trying to connect using IMAP, that wasn't the case when I used for Exchange 2007 or 2010 when IMAP was not enabled.
Is there something else I'm missing for configuration with Unity Connection to support Single Inbox with Exchange 2003 SP2?
Thank you!
-rya

Hi Rya,
I just wanted to add my +5 vote for this great catch by Aaron (nice work "A")
If you are going to upgrade to Unity Connection 8.6
Check out this great doc from Saurabh for the refresh upgrade notes to 8.6.
https://supportforums.cisco.com/community/netpro/collaboration-voice-video/unified-comm-application/blog/2011/08/11/checklist-before-upgrading-to-unity-connection-86
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Exchange 2003 SP2 messages stuck in queue

HI
I just inherited a exchange 2003 SP2 machine and next month we are migrating to 365. But here is what happen so far and the issue
1. The previous IT company had the emails flowing thru smart host via their own hosted spam filter.
2. I came in and changed my MX records and installed a on server spam filter (ORF) by Vamsoft and configured it. Removed the smart host info and made sure that the firewall is all configured properly.
3. Tested in bound email.
4. Problem. Out bound emails go thru till the server. Some users get a delayed email but others do not. The messages are stuck in the outbound Queue. restarted the SMTP and still no luck. Disabled Spam filter (ORF) still
no luck.
Then I looked at anything which is common.
mails to msn.com & Hotmail.com are stuck. Emails to my company tejes.com are stuck. There are other few companies but do not know their email provider but the common theme between these 3 domains all are hosted by Microsoft. tejes.com
is on office365.
I need help. Please
Anil
Update: Fixed it. The previous company had filters in place.

HI
I just inherited a exchange 2003 SP2 machine and next month we are migrating to 365. But here is what happen so far and the issue
1. The previous IT company had the emails flowing thru smart host via their own hosted spam filter.
2. I came in and changed my MX records and installed a on server spam filter (ORF) by Vamsoft and configured it. Removed the smart host info and made sure that the firewall is all configured properly.
3. Tested in bound email.
4. Problem. Out bound emails go thru till the server. Some users get a delayed email but others do not. The messages are stuck in the outbound Queue. restarted the SMTP and still no luck. Disabled Spam filter (ORF) still
no luck.
Then I looked at anything which is common.
mails to msn.com & Hotmail.com are stuck. Emails to my company tejes.com are stuck. There are other few companies but do not know their email provider but the common theme between these 3 domains all are hosted by Microsoft. tejes.com
is on office365.
I need help. Please
Anil
Update: Fixed it. The previous company had filters in place.
Hi Anil,
Glad to know the issue has been fixed.
Also find this KB for your reference:
How to configure connection filtering to use Realtime Block Lists (RBLs) and how to configure recipient filtering in Exchange 2003
http://support.microsoft.com/kb/823866
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

OUTLOOK 2013 permission shared calendar Free/Busy doesn't work for some the users Exchange 2010 and Exchange 2003 that use outlook 2007/2010

Hello,
We are in coexitence organisation (transition Migration) Exchange 2003 sp2 and Exchange 2010 sp1.
Users in Exchange 2003 use outlook 2007 and outlook 2010
Users in Exchange 2010 use outlook 2007, outlook 2010 and outlook 2013.
Issue: users in Exchange 2003 can't open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
User in Exchange 2010 with outlook 2007 can't also open outlook 2013 user calendar when he has Busy/Free information as default permission in his calendar.
Is it normal ? or exist some configurations to do in order to coexist all thoses clients and servers ?
Thanks in advance

Hi,
Does this issue occur on Outlook only or both Outlook and OWA?
Since you have double checked the permissions via multiple methods, it seems there is nothing problem on permission. Please make sure the migration from Exchange 2003 server completed successfully.
If in OWA everything goes well (cannot see details), it should be an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Migration; Exchange 2003 SP2 to Exchange 2013 on new Domain and DC

I wasn't prepared for this task, and it was thrown at me to do... Eyes are bleeding from planning reading and planning, would LOVE any input from you guys. First time posting, here and have heard great things about these forums. The Company
I work for obtained a new client and a network that is in a cluster at the moment, so I'm having to dig through everything and restructure..
Scenario:
Old Domain/Server: (To be decommissioned)
Server 2003 Standard SP2 (Domain: cosco.com; NETBIOS name: coscoex)
Exchange 2003 SP2 (6.5.7638.1)
Server is a domain controller and exchange server.
Migrating to:
Server 2012 R2 Datacenter (New Domain ad.cosco.com; NETBIOS name: cosco)
VM #1: Server 2012 R2 Domain Controller at 2012 R2 Functionality
VM #2: Server 2012 R2 with Exchange 2013 Standard (Not Yet Installed) Joined to ad.cosco.com domain
VM #3: Server 2012 R2 with Exchange 2010 (Not Yet Installed) joined to ad.cosco.com domain
These are probably not ideal conditions, but I have to work with what I'm given.
Host server (2012 R2) is in work group mode. Hyper V Installed with a VM of Server 2012 R2 and as a DC at a functionality level of Server 2012 R2. I had intended starting at a lower functionality level and raising
it later, but.... ya I forgot to change it. If needed I can spool up a new DC with a lower functional level.
DNS, AD and group policy is all jacked up on the 2003 DC so that doesn't matter, All user accounts are going to be created under the new domain. The concern is migrating the mailboxes from Exchange 2003 on the old domain to
Exchange 2013 on the new domain. The client is going to provide CSV of the AD accounts that are still valid (a lot of accounts are no longer used or are from people that no longer with the organization.)
I had some ideas, but I'm not sure if they will work. This is something I have never done before (Senior Engineer Quit).
My thoughts:
- Establish a two way trust relationship between the two domains.
- Create two VM's, one with Exchange 2010 and one with Exchange 2013 (They have a 2010 licence that was not used).
- Create the users on the new domain
- Use the double hop method from Exchange 2003 > Exchange 2010 > Exchange 2013
- Link Exchange accounts to the correct user accounts on the new DC.
Can this be done cleanly? Am I going about this the correct way? Any feedback would be GREATLY appreciated.
Note: We are forced to use ad.cosco.com (Obviously not the actual domain name)

Hi,
Base on my experience, your idea is feasible.
However, before getting started, you should note that Exchange 2010 (with any service pack or update rollups) is not (yet) supported to install on Windows 2012 R2. More details refer to the following link:
http://technet.microsoft.com/library/ff728623(v=exchg.150).aspx
After all the preparations complete, you can refer to the following articles to migration exchange 2003 to 2010, then to 2013:
Exchange 2003 to 2010 Cross-Forest Migration Step by Step Guide
Exchange 2010/2007 to 2013 Migration and Co-existence Guide
Best regards,
Niko Cheng
TechNet Community Support

Migration from an exchange 2003 organisation A (Exchange 2003 sp2) to another Exchange 2010 organisation B

Hello,
We have two Exchange organisations:
- A (Exchange 2003 SP2)
- B (Exchange 2010)
we want to migrate from A to B. the two organisations have to coexist during the migration (6 months). during this time the users have to share the same GAL and Calendar (Busy/Free informations).
What are the steps to follow ?
is there any docs/links treat this subject ?
Regards

Hi,
You can use FIM for GALSYNC.
REF:http://setspn.blogspot.in/2010/05/global-address-list-synchronization-gal.html
For calendar sharing follow the below blog:
REF:http://blogs.technet.com/b/exchange/archive/2011/03/28/iorepl-and-exchange-2010-sp1.aspx
Regards
Vickram

Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

Hi,
Did you get any error messages?
Do you have Outlook Anywhere and autodiscovery set up properly?
Can you ping the Exchange server?
Please use Test Email AutoConfiguration
to test if the Autodiscover service is configured properly. See:
https://hosting.intermedia.net/support/kb/default.asp?id=2150
We can also use the remote connectivity analyzer to troubleshoot the issue:
https://testconnectivity.microsoft.com/
In addition, turn off your firewall and anti-virus to check the result.
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

What is required to Exchange integration work - (Can't connect to Exchange Web Server)?

Hi guys,
We have just 'beaten' our Lync installation until it decided to work with mobility, however the clients (IOS) complain that it "Can't connect to Exchange Web Server". Entirely possible its our own fault!
My question is:
What exactly do I need to configure to make this work?
DNS records,
Firewall rules,
etc.
We are running:
Exchange 2010 on-premise
TMG 2010
Cheers
Dave
Dave

Hi Dave,
The Lync 2010 mobile client for iPhone and iPad has a Meeting tab that lists meetings for the day from the Exchange calendar.
The client uses simple Exchange Autodiscover processes to determine the location of the Exchange server of the user who is signed in. The SIP Uniform Resource Identifier (URI) of the user is used in the attempt to discover the Exchange Web Services (EWS) endpoint.
However, if the user’s SIP URI and email address are different, the Autodiscover process will fail, the Meeting tab will be blank, and Exchange Unified Messaging (UM) voicemail in the Phone tab will not sync.
For disjointed email and SIP URIs, the Lync 2010 mobile client for iPhone and iPad lets the user specify a different set of credentials for Exchange integration. For the Exchange Autodiscover process to work correctly, the necessary DNS records must be available.
To confirm that Autodiscover is working, use Microsoft Remote Connectivity Analzyer at http://www.testexchangeconnectivity.com (http://www.testexchangeconnectivity.com/)
In addition, please also refer to this document
Lync 2010 Integration. Hope helps.
Noya Liu
TechNet Community Support

OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.

hi ALL
OUtlook 2013 can not connect to exchange 2013 after exchange maibox member of DAG failed.
Exchange environment contains 2 Exchange Mailboxesserver ,( one Failed , virtual Machine)
2 cas Servers
first databases could not be mounted but after we run the below command , users can use OWA but outlook could not connect
Start-DatabaseAvailabilityGroup -Identity DAG -MailboxServer MBX1
please support
thanks

Hi,
According to your description, I understand that Outlook client cannot connect to Exchange server 2013 while one member of DAG failed.
If I have misunderstand your concern, please do not hesitate to let me know.
I want to double confirm whether all account store in MBX1 experience this issue, users in MBX2 works fine.
Please run following command to double check the database status:
Get-MailboxDatabase –Status | select Name,Mounted,MountedOnServer
If it works in OWA, the issue may be related to Outlook side. Please run “Test E-mail AutoConfiguration” and “Outlook Connection Status” to get more details, expecial the setting of proxy server, it’s more helpful
for further troubleshooting.
Additional, please try to recreate a profile for testing. Besides, please move active DB back to MBX1.
Best Regards,
Allen Wang

[Servlet Error]-[Can't connect to X11 window server using ':0.0&#39

i m using repot engin to disply report its running in windows well in my local machine but whn i deployeed it to test server (AIX) it gave me this error server is websphere
E SRVE0026E: [Servlet Error]-[Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.]: java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:175)
     at java.lang.Class.forName1(Native Method)
     at java.lang.Class.forName(Class.java(Compiled Code))
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:91)
     at java.awt.Font.initializeFont(Font.java:333)
     at java.awt.Font.<init>(Font.java:368)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.getFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.handleFont(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.closeObjects(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.endElement(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.startParsing(Unknown Source)
     at com.actuate.ereport.engine.templateio.XMLTmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.ReadTemplateFromBytes(Unknown Source)
     at com.actuate.ereport.engine.templateio.TmplReader.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.engine.ACJEngine.readTemplate(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at com.actuate.ereport.eapi.factory.DesignFactoryImpl.load(Unknown Source)
     at ccrmsweb.actions.PrintRpts.execute(PrintRpts.java:129)
Please tell me wht exactly i have to do, i men exactly its very urgent

Check this thread:
Re: Can't connect to X11 window server using 'localhost:0.0'

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.

Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
     at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
     at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:120)
     at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
     at java.awt.Font.initializeFont(Font.java:264)
     at java.awt.Font.(Font.java:298)
     at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

A Java AWT, X11 problem posted in the weblogic ejb newsgroup. I haven't been in here for long, but
that has to be a first.
If you have the DISPLAY env variable set to :0.0, you have to be at the console on a Solaris box
running the XServer. 'xdm' I think is the code that has to be running. Also, I think the format is
<hostname:0.0> or better <hostname:0> unless you are on a multi-headed workstation. Something like:
export DISPLAY=hostname:0
where hostname is the name of the host running an XServer and the .xhosts file allows access to the
XServer from the display client.
Apparently, you are not at the console?
Anyway, I don't think there is a newsgroup here that I could even recommend to cross-post this to as
it is not a WebLogic question. I think I would try the Discussion Forums at http://java.sun.com.
Bill
"D. Alvarado" wrote:
Hi,
I'm running WebLogic 5.1 sp10 on a Solaris box and I get the
following error:
java.rmi.RemoteException: java.lang.InternalError: Can't connect to
X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.(X11GraphicsEnvironment.java:59)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:58)
at java.awt.Font.initializeFont(Font.java:264)
at java.awt.Font.(Font.java:298)
at com.hrw.xls.EmailXLSThread.getCellWidth(EmailXLSThread.java:162)
caused by the following code fragment:
Font f = new Font(fontName, fontStyle, fontHeight);
FontMetrics fm = (new Panel()).getFontMetrics(f);
Have I just forgotten to set an environment variable? I would prefer
not to install bulky pieces of software, but if that's what it takes
to get over this error, so be it.
Thanks, Dave A.

Can't connect to X11 window server using ':0.0' as the value of the DISPLAY

i try to use jfreechart to create a piechart on a aix os with jdk1.3.1 and the aix system does not have a xwindow installed
and the found the following error
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable.
at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:77)
at java.lang.Class.forName1(Native Method)
at java.lang.Class.forName(Class.java(Compiled Code))
at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72)
at java.awt.Font.initializeFont(Font.java:285)
at java.awt.Font.<init>(Font.java:319)
at org.jfree.chart.plot.PiePlot.<clinit>(PiePlot.java:230)
i got the tip of passing -Djava.awt.headless=true to vm to disable system graphic calls but after restart weblogic i still get the same error
i am wondering if this case has something to do with jdk 1.3.1, and perhaps newer versions of jdk can take the parameter and operate correctly
is that right?

is headless option supported in jdk1.3.1?No,
It was added in JDK 1.4:
http://java.sun.com/j2se/1.4.2/docs/guide/awt/AWTChanges.html#headless
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4281163
Kaj

Can't connect to X11 window server using

java.lang.InternalError: Can't connect to X11 window server using "Ip" as the value of the DISPLAY variable.
I get the above error when I try to create an instance of the JProgressBar.
I have not been able to create a workaround.
One suggestion that I had was to use the following system command.
System.setProperty("java.awt.headless","true");
That gave me a null pointer exception.
I also tried setting the compiler parameters to make this process headless, but it did not make any difference.
I am running this code in a Unix environment.
Any ideas?

Hi
Generally in Unix environment the server should accept the connections from clients. Run the xhost + command on the server to which you are trying to connect and then try your application.
Thanks
Srinivas

Can't connect to X11 window server using ':0.0'

I tried to deploy a sampel BIBean application (JSP+BIBean) to standalone OC4J( install on AIX).
When I launch the jsp from windows browser,I got the following error message.
And I export DISPLAY=IP address:0.0 and bounce the OC4J, the IP address is the machine which I launch the browser and JSP. The I can lanuch the BIBean sample application successfuly (I can see the crosstab, grap...).
But this means that only my machine's browser can access application, not others.. Is ther anything wrong with my configurations.. Please help!!!
500 Internal Server Error
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the value of the DISPLAY variable. at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method) at sun.awt.X11GraphicsEnvironment.<clinit>(X11GraphicsEnvironment.java:77) at java.lang.Class.forName1(Native Method) at java.lang.Class.forName(Class.java:142) at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(GraphicsEnvironment.java:72) at java.awt.Font.initializeFont(Font.java:285) at java.awt.Font.<init>(Font.java:319) at oracle.dss.dataView.managers.ViewStyle.<clinit>(ViewStyle.java:6600) at oracle.dss.thin.beans.dataView.BaseTitle.<init>(BaseTitle.java:50) at oracle.dss.thin.beans.dataView.Title.<init>(Title.java:31) at oracle.dss.thin.beans.dataView.Title.<init>(Title.java:42) at oracle.dss.thin.beans.dataView.ThinDataview.<init>(ThinDataview.java:131) at oracle.dss.thin.beans.gridView.ThinGridView.<init>(ThinGridView.java:123) at oracle.dss.thin.beans.crosstab.ThinCrosstab.<init>(ThinCrosstab.java:216) at java.lang.Class.newInstance0(Native Method) at java.lang.Class.newInstance(Class.java:262) at oracle.dss.persistence.persistencemanager.client.DefaultObjectFactory.getObjectInstance(DefaultObjectFactory.java:199) at oracle.dss.persistence.persistencemanager.client.DefaultStateHandler.recreatePersistableFromStateAgent(DefaultStateHandler.java:357) at oracle.dss.metadataManager.client.handlers.persistence.PersistenceMetadataHandler.getObjectInstance(PersistenceMetadataHandler.java:242) at oracle.dss.metadataManager.client.MetadataManager.getUserObject(MetadataManager.java:3168) at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:355) at oracle.dss.metadataManager.common.MDFolder.lookup(MDFolder.java:539) at oracle.dss.addins.thin.common.BaseThinSession.loadView(BaseThinSession.java:110) at oracle.dss.addins.thin.common.BasePresentationHandler.createBIThinObject(BasePresentationHandler.java:806) at oracle.dss.addins.jspTags.PresentationTag.createThinObject(PresentationTag.java:102) at oracle.dss.addins.jspTags.BIBaseTag.getThinObject(BIBaseTag.java:72) at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:162) at viewerJSP.jspService(_viewerJSP.java:84) [SRC:/viewerJSP.jsp:7] at com.orionserver[Oracle9iAS (9.0.3.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:317) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:465) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:379) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java(Compiled Code)) at com.evermind[Oracle9iAS (9.0.3.0.0) Containers for J2EE].server.http.HttpRequestHandler.run(HttpRequestHandler.java:106) at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:797) at java.lang.Thread.run(Thread.java:512)

Hi, Kelly
Thanks for your kind response.
The X-server should work, when I export DISPLY to a remote X-server.
How about ImageServlet.. It seems that the ImageServlet has more advantages than X-server or XVBF
I tried to configure OC4J using ImageServlet follow UIX developer's guide. But I was not able to force OC4J to use ImageSevlet. But OC4J is stll try to find X-sever..
I modified the web.xml file for the sample application I deployed.
Is this a right configuration? What is the different
<servlet>^M
<servlet-name>uix</servlet-name>^M
<servlet-class>oracle.cabo.servlet.UIXServlet</servlet-class>^M
<init-param>^M
<servlet-name>uix</servlet-name>^M
<servlet-class>oracle.cabo.image.servlet.ImageServlet</servlet-class>^M

Can't connect to Exchange 2003 SP2 using BIS

Similar Messages

Maybe you are looking for