Can't connect to Exchange 2007 SP2 server

When I try and set up a new Exchange account to our internal Exchange 2007 server I get the following error message:
"The Exchange Server '<server name>' doesn't have the minimum required version installed. To use Mail with Exchange, the server must be running Update Rollup 4 for Exchange Server 2007 Service Pack 1 or later. Contact your server administrator.'
in spite of Service Pack 2 being installed on the server.
Exchange Web Services are running as expected at the URL '/EWS/Exchange.asmx'.
If anyone has suggestion on how to diagnose the exact problem I would very much appreciate the assistance.
N.

Hello,
I don't have any ideas yet but can chime in with "me too".
A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

Similar Messages

  • Can't connect to Exchange 2003 SP2 using BIS

    Hi,
    I'm a network administrator for a small company. We have a user with a Blackberry 8830, and they'd like to access their Exchange account from the device. We're running Exchange 2003 SP2.
    I attempted to set this up on the Blackberry and got the following error:
    "Cannot connect to email server or invalid server name. Please verify the Outlook Web Access URL. If the error persists, contact antarcticadigital.com (your email provider)."
    The user received an email with the following info:
    Your attempt to configure the BlackBerry Internet Service to deliver mail to your BlackBerry device from this email account was unsuccessful. This email provides instructions to help with the email account set up.
    You submitted the following information:
    Account Type:
    Outlook Web Access
    Email Address:
    [email protected]
    User Name:
    connectusdirect\person
    Password:
    ****** (For security the password is not displayed.)
    Mail Server:
    https://mail.xyz.com/exchange/
    [removed personal information]
    For historical reasons, our Windows domain name is connectusdirect, while the email domain is different (antarcticadigital.com).
    I've set this up before when I had a blackberry of my own, and it worked OK for me - so I'm not sure why we're having a problem with this user's account.
    On our mail server, I'm seeing the following in the IIS logs for the OWA site. These are coming from a RIM-controlled IP:
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 410 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 456 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 387 640 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /EWS/Exchange.asmx - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1753 832 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 376 823 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 874 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 POST /exchange - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1848 1058 93
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 GET /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 148 78
    2010-05-03 19:52:02 W3SVC1 192.168.3.23 GET /exchange - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 194 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 302 0 0 383 378 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 2 2148074254 357 158 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 401 1 0 345 204 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/logon.asp - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+6.0;+Windows+NT+5.0) - - mail.antarcticadigital.com 404 0 0 1848 388 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 401 2 2148074254 357 219 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 - 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 401 1 0 345 265 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 GET /exchange/ - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) - - mail.antarcticadigital.com 200 0 0 1485 449 78
    2010-05-03 19:52:03 W3SVC1 192.168.3.23 PROPFIND /exchange/jrebak/ - 80 CONNECTUSDIRECT\jrebak 67.223.64.111 Mozilla/4.0+(compatible;+MSIE+5.01;+Windows+NT+4.0) sessionid=af524a8e-7c18-4926-a10e-803bf5cc70f8:0x0 - mail.antarcticadigital.com 404 0 0 387 472 78
    Does anyone have any ideas?
    Thanks,
    Richard

    Hello,
    I don't have any ideas yet but can chime in with "me too".
    A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
    One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
    Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
    An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

  • Outlook 2013 cannot connect to Exchange 2010 SP2 server, Outlook 2010, OWA work fine. Ideas?

    After upgrading a laptop from Outlook 2010 to 2013 it can no longer connect to our Exchange 2010 SP2 environment.  OWA works, Outlook 2010 works, but Outlook 2013 will not create a profile via AutoDiscover.  The first two checks go, the last check
    Log On To server will not.
    We can take the laptop to a different network and it works fine with Outlook 2013.
    What is different with Outlook 2013 where it will not connect.
    Jason Meyer

    Does it work when we recreate a new Outlook profile?
    At this point, We high recommand that we run Microsoft Connectivity Analyzer Tool from the folloing link to check what was happening
    https://testconnectivity.microsoft.com/
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]

  • BIS and Exchange 2007 SP2

    Looks like there are issues with BIS working with SP2.  We had Exchange 2007 SP1 working fine with BIS until we upgraded to SP2 over the weekend.  Now the BIS blackberries are not able to receive email.  Just like before BIS supported Exch 2007.  We called our provider, who put us in touch with RIM/Blackberry, and were told we had a unique situation that they couldn't help with.  The unique situation being a single Exchange 2007 SP2 server with no ISA server (not sure how unique that is, but ok).
    So right now we have a few blackberries that are able to send, but may never receive again.

    Hi Everyone
    Basically, the BlackBerry Internet Service uses Exchange Web Services (EWS) to interact with Outlook Web Access accounts.  If EWS is not enabled or working properly, we cannot integrate the email account properly.
    Take a look at this article for more information:
    http://www.blackberry.com/btsc/KB18567
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Hello.....after updating to Yosemite, i can't get my exchange mail to work.  It keeps saying can't connect to exchange server and asks for my password.  My mail is still working fine on android phone and ipad2.  Can someone help?

    Hello....after updating to Yosemite my mail isn't working .  Keeps saying can't connect to exchange server and asking for password

    I am having this exact same problem with my gmail account. Hopefully someone will have a remedy.

  • What is required to Exchange integration work - (Can't connect to Exchange Web Server)?

    Hi guys,
    We have just 'beaten' our Lync installation until it decided to work with mobility, however the clients (IOS) complain that it "Can't connect to Exchange Web Server". Entirely possible its our own fault!
    My question is:
    What exactly do I need to configure to make this work?
    DNS records,
    Firewall rules,
    etc. 
    We are running:
    Exchange 2010 on-premise
    TMG 2010
    Cheers
    Dave
    Dave

    Hi Dave,
    The Lync 2010 mobile client for iPhone and iPad has a Meeting tab that lists meetings for the day from the Exchange calendar.
    The client uses simple Exchange Autodiscover processes to determine the location of the Exchange server of the user who is signed in. The SIP Uniform Resource Identifier (URI) of the user is used in the attempt to discover the Exchange Web Services (EWS) endpoint.
    However, if the user’s SIP URI and email address are different, the Autodiscover process will fail, the Meeting tab will be blank, and Exchange Unified Messaging (UM) voicemail in the Phone tab will not sync.
    For disjointed email and SIP URIs, the Lync 2010 mobile client for iPhone and iPad lets the user specify a different set of credentials for Exchange integration. For the Exchange Autodiscover process to work correctly, the necessary DNS records must be available.
    To confirm that Autodiscover is working, use Microsoft Remote Connectivity Analzyer at http://www.testexchangeconnectivity.com (http://www.testexchangeconnectivity.com/)
    In addition, please also refer to this document
    Lync 2010 Integration. Hope helps.
    Noya Liu
    TechNet Community Support

  • Lync 2010 iPhone - Can't connect to Exchange web server. you can try again later

    Hi there,
    I installed Lync 2010 mobility, and works fine, but iPhone users have a :
    Can't connect to Exchange web server.
    you can try again later
    Now does this have anything to do with it? And how do i fix it? I searched but nothing relevant

    Total server discovery time: 0.3 seconds
    Starting Lync server autodiscovery
    Please wait; this test may take several minutes to complete...
    Starting automatic discovery for secure (HTTPS) internal channel
    Server discovery has completed for https://lyncdiscoverinternal.contoso.com/.
    Automatic discovery results for https://lyncdiscoverinternal.contoso.com/
    Access Location                          : Internal
    SIP Server Internal Access               : server.contoso.com
    SIP Server External Access               : sip.contoso.com
    SIP Client Internal Access               : server.contoso.com
    SIP Client External Access               : sip.contoso.com
    Internal Auth broker service             : https://server.contoso.com/Reach/sip.svc
    External Auth broker service             : https://lync.contoso.com/Reach/sip.svc
    Internal Auto discover service           : https://server.contoso.com/Autodiscover/AutodiscoverService.svc/root
    External Auto discover service           : https://lync.contoso.com/Autodiscover/AutodiscoverService.svc/root
    Internal MCX service                     : https://lync.contoso.com/Mcx/McxService.svc
    External MCX service                     : https://lync.contoso.com/Mcx/McxService.svc
    Internal UCWA service                    : service URL is empty in the discovery response
    External UCWA service                    : service URL is empty in the discovery response
    Internal Webscheduler service            : service URL is empty in the discovery response
    External Webscheduler service            : service URL is empty in the discovery response
    Server discovery succeeded for secure (HTTPS) internal channel against URL https://lyncdiscoverinternal.contoso.com/
    Starting automatic discovery for unsecure (HTTP) internal channel
    Couldn't connect to URL http://lyncdiscoverinternal.contoso.com/[email protected] (HTTP status code Forbidden)
    Server discovery failed for unsecured internal channel against http://lyncdiscoverinternal.contoso.com/
    Starting automatic discovery for secure (HTTPS) external channel

  • Receive Connector stopped working after Update Rollout 2 for Exchange 2007 SP2

    One of the Exchange 2007 servers receive connector has stopped working since installing the latest rollout update for Exchange 2007 SP2 - for some reason the following error is received (when troubleshooting on the adjacent server) :
    "Remote server server.domain.co.uk failed the mail acceptance test. MAIL FROM command: Respond = 530 5.7.1 Client was not authenticated."
    Most admins will know you usually get this when first setting up Exchange and the receive connector not allowing anonymous connections. But our setup has been working for well over a year with no problems. Even enabling anonymous connections still doesn't fix the problem.
    Our setup is 2 exchange servers across 2 sites, with the problematic server never receiving email from the internet, only from the other Exchange server (which is internet facing). The above error is received when the internet facing server is relaying email over to the problematic server. Though in the message queue the following error is received:
    "SMTPSEND.DNS.NonExistantDomain; nonecistant domain"
    After testing DNS that all seems fine, so I don't believe it's a DNS problem.
    Any ideas why this would happen?
    Thanks,
    Matt

    Hi Matt....
    To receive e-mails from the external servers or domains or clients, you can setup a new receive connector on Hub Transport Server. To do this task, you can go through the steps mentioned in this blog....
    https://mailsolutions.wordpress.com/2015/02/06/resolving-error-530-5-7-1-client-was-not-authenticated-with-receiver-connector/
    Hope this will work
    Thanks

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

  • Does anyone know how to get apple mail in Lion to connect with Exchange 2007?

    Does anyone know how to get apple mail in Lion 10.7.2 to connect with Exchange 2007?  It worked perfectly with Snow Leopard... upgraded to lion and it won't work.  We use Exchange 2007 with SP 3 and Rollup 4.  Won't connect... and I can't get Apple to give me any direction. 

    We finally got it to work today.  We had to call and pay for the microsoft support service, but the issue was on the server end.  We had to go into the iis manager... went to sites... when to default website...and changed the SSL settings for Auto Discover, EWS Exadmin, echange, exchweb, owa... and the rest..
    Change the settings to ignore client certificates.
    Problem solved. Can finally send and receive.

  • Upgrade of Exchange 2007 SP2 rollup 5 to SP3

    Hi,
    We are trying to Upgrade Our Exchange 2007 server from todays SP2 With rollup 5 to the SP3 package.
    During the installation it stops right after stopping all of the services and asks for the exchangeserver..msi file, if i point it the that file in the SP3 package it still just asks me for the file again.
    Exchange Server is running on a Windows Server 2008 system
    Any ideas of what the solution could be?
    e is what i have from the exchangesetup.txt:
    [02.04.2014 22:56:54] [0] Setup will run the task 'uninstall-msipackage'
    [02.04.2014 22:56:54] [1] Setup launched task 'uninstall-msipackage -logfile 'C:\ExchangeSetupLogs\ExchangeSetup.msilog' -ProductCode '24b2c164-de66-44fe-b468-a46d9d5e6b31' -PropertyValues 'BYPASS_CONFIGURED_CHECK=1 DEFAULTLANGUAGENAME=ENU'' 
    [02.04.2014 22:56:54] [1] Beginning processing.
    [02.04.2014 22:56:54] [1] Property 'PackageName' is 'exchangeserver.msi'.
    [02.04.2014 22:56:54] [1] Removing MSI package with code '24b2c164-de66-44fe-b468-a46d9d5e6b31'.
    [02.04.2014 22:59:50] [1] [ERROR] Unexpected Error
    [02.04.2014 22:59:50] [1] [ERROR] Unable to remove product with code 24b2c164-de66-44fe-b468-a46d9d5e6b31. The installation source for this product is not available. Verify that the source exists and that you can access it. Error code is 1612.
    [02.04.2014 22:59:50] [1] [ERROR] The installation source for this product is not available. Verify that the source exists and that you can access it
    [02.04.2014 22:59:50] [1] Ending processing.
    [02.04.2014 22:59:50] [0] The Exchange Server Setup operation did not complete. For more information, visit
    http://support.microsoft.com and enter the Error ID.
    [02.04.2014 22:59:50] [0] End of Setup
    [02.04.2014 22:59:50] [0] **********************************************
    And here is the relevant from the exchangesetup.msilog file:
    === Verbose logging started: 02.04.2014  22:56:54  Build type: SHIP UNICODE 4.05.6002.00  Calling process: D:\Temp\exchange\Setup\ServerRoles\Common\ExSetup.exe ===
    MSI (c) (48:20) [22:56:54:795]: Resetting cached policy values
    MSI (c) (48:20) [22:56:54:795]: Machine policy value 'Debug' is 0
    MSI (c) (48:20) [22:56:54:795]: ******* RunEngine:
               ******* Product: {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (48:20) [22:56:54:796]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (48:20) [22:56:54:796]: Grabbed execution mutex.
    MSI (c) (48:20) [22:56:54:800]: Cloaking enabled.
    MSI (c) (48:20) [22:56:54:800]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (48:20) [22:56:54:809]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (34:B8) [22:56:54:815]: Running installation inside multi-package transaction {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (s) (34:B8) [22:56:54:815]: Grabbed execution mutex.
    MSI (s) (34:88) [22:56:54:818]: Resetting cached policy values
    MSI (s) (34:88) [22:56:54:818]: Machine policy value 'Debug' is 0
    MSI (s) (34:88) [22:56:54:818]: ******* RunEngine:
               ******* Product: {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (34:88) [22:56:54:819]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (34:88) [22:56:54:820]: Warning: Local cached package 'C:\Windows\Installer\b335acd4.msi' is missing.
    MSI (s) (34:88) [22:56:54:820]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (34:88) [22:56:54:820]: User policy value 'DisableMedia' is 0
    MSI (s) (34:88) [22:56:54:820]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Looking for sourcelist for product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Adding {24B2C164-DE66-44FE-B468-A46D9D5E6B31}; to potential sourcelist list (pcode;disk;relpath).
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Now checking product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Media is enabled for product.
    MSI (s) (34:88) [22:56:54:820]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Trying source C:\Users\administrator.LKG\Desktop\Exchange 2007 sp2\.
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 2203 2: C:\Users\administrator.LKG\Desktop\Exchange 2007 sp2\exchangeserver.msi 3: -2147287037
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Processing net source list.
    MSI (s) (34:88) [22:56:54:821]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:821]: SOURCEMGMT: Processing media source list.
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 2203 2:  3: -2147287037
    MSI (s) (34:88) [22:56:54:824]: SOURCEMGMT: Source is invalid due to missing/inaccessible package.
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:824]: SOURCEMGMT: Processing URL source list.
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (s) (34:88) [22:56:54:824]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:825]: User policy value 'SearchOrder' is 'nmu'
    MSI (c) (48:F0) [22:56:54:825]: User policy value 'DisableMedia' is 0
    MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'AllowLockdownMedia' is 0
    MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Media enabled only if package is safe.
    MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Prompting user for a valid source.
    MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'DisableBrowse' is 0
    MSI (c) (48:F0) [22:56:54:825]: Machine policy value 'AllowLockdownBrowse' is 0
    MSI (c) (48:F0) [22:56:54:825]: SOURCEMGMT: Browsing is enabled.
    MSI (c) (48:F0) [22:56:54:830]: Font created.  Charset: Req=0, Ret=0, Font: Req=MS Shell Dlg, Ret=MS Shell Dlg
    MSI (c) (48:F0) [22:56:54:830]: Machine policy value 'DisableUserInstalls' is 0
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Now checking product {24B2C164-DE66-44FE-B468-A46D9D5E6B31}
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Media is enabled for product.
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing net source list.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing media source list.
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Trying media source ;1.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: SOURCEMGMT: Processing URL source list.
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1402 2: UNKNOWN\URL 3: 2
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2: -2147483647 3: exchangeserver.msi
    MSI (c) (48:F0) [22:56:54:831]: Note: 1: 1706 2:  3: exchangeserver.msi
    MSI (c) (48:14) [22:58:49:184]: SOURCEMGMT: Trying source D:\Temp\exchange\exchangeserver.msi.
    MSI (c) (48:14) [22:58:49:184]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ExpMSI (s) (34:B8) [22:59:50:653]: I/O on thread 5248 could not be cancelled. Error: 1168
    MSI (s) (34:B8) [22:59:50:653]: I/O on thread 6584 could not be cancelled. Error: 1168
    MSI (s) (34:B8) [22:59:50:653]: I/O on thread 3208 could not be cancelled. Error: 1168
    MSI (s) (34:B8) [22:59:50:653]: I/O on thread 9372 could not be cancelled. Error: 1168
    MSI (s) (34:88) [22:59:50:654]: SOURCEMGMT: Failed to resolve source
    MSI (s) (34:88) [22:59:50:655]: MainEngineThread is returning 1612
    lorer 3: 2
    MSI (c) (48:14) [22:58:49:251]: SOURCEMGMT: Source is invalid due to client source out of sync (product code is the same).
    MSI (c) (48:14) [22:58:49:252]: Note: 1: 1731 2: -2147483645 3: exchangeserver.msi
    MSI (s) (34:B8) [22:59:50:656]: User policy value 'DisableRollback' is 0
    MSI (s) (34:B8) [22:59:50:656]: Machine policy value 'DisableRollback' is 0
    MSI (s) (34:B8) [22:59:50:657]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (34:B8) [22:59:50:657]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (34:B8) [22:59:50:658]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (34:B8) [22:59:50:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (34:B8) [22:59:50:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (34:B8) [22:59:50:659]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (34:B8) [22:59:50:660]: Restoring environment variables
    MSI (c) (48:20) [22:59:50:663]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (48:20) [22:59:50:664]: MainEngineThread is returning 1612
    === Verbose logging stopped: 02.04.2014  22:59:50 ===

    Hi
    Its the problem with the installation file  
    Its better you download a fresh installation pack from the tech-net and start the upgrade and it will be successful probably the latest one below SP3 RU9
    http://www.microsoft.com/en-us/download/details.aspx?id=36016
    Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you
    But that download is only the rollup 9 for the SP3.
    The current system is SP2 With rollup 5, will i not have to Upgrade With the SP3 package first?
    Before moving on to the rollups?

  • Unrecognized certificate when Outlook 2010 tries to connect to Exchange 2007 on SBS 2008

    Hi all,
    I believe this is a security issue rather than a connectivity or configuration problem.
    Running Outlook 2010 on Windows 7 trying to connect to Exchange 2007 on SBS 2008, I receive the following error:
    "The name of the security certificate is invalid or does not match the name of the site"
    When I view the certificate I see that it was issued to "zx-server" by "zx". This is NOT my domain CA nor is it a certificate I recognize. I use a self-issued certificate (i.e. issued by the SBS box). I also receive this certificate error when I browse to
    the internal website (companyweb). No other computers on the network are seeing this behaviour.
    I have checked the certificate stores in certmgr and I can't find any such certificate or CA. I have also searched the entire hard drive with no luck. I have run Kaspersky AV, Malwarebytes and MS Security Essentials several times but I can't find any malware.
    I also recently installed Comodo Firewall (the problem began after this).
    I need to find and remove the certificate and prevent it from being presented to me every time I try to connect to the server. All help, advice and suggestions appreciated.
    Aide

    Hi,
    It’s really a common issue.
    This issue occurs if the following conditions are true:
    You replace the default self-signed Exchange Server 2007 or Exchange Server 2010 certificate with a different certificate.
    Note The Setup program in Exchange Server 2007 or in Exchange Server 2010 creates a default self-signed certificate when Exchange Server 2007 or Exchange Server 2010 is installed.
    The common name on the replacement certificate does not match the fully qualified domain name (FQDN) of the URL that is stored in the following objects:
    o   
    The Service Connection Point object for the Autodiscover service
    o   
    The
    InternalUrl attribute of Exchange 2007 Web Service (EWS)
    o   
    The
    InternalUrl attribute of the Offline Address Book Web service
    o   
    The
    InternalUrl attribute of the Exchange unified messaging (UM) Web service
    By default, the URL that is stored in these objects references the NetBIOS name of the server. For example, a URL that resembles the
    following URL is stored:
    https://NetBIOS_name.contoso.com/autodiscover/autodiscover.xml
    This may differ from the host name that is used in the FQDN of the replacement certificate. For example, the replacement certificate
    may have an FQDN that resembles the following FQDN:
    mail.contoso.com
    This issue causes a name mismatch error to occur. Therefore, you receive the security warning message when you try to connect Outlook
    2007 to the mailbox.
    For more detailed information about the procedures to fix the issue, please refer to the following KB article:
    Title: Security warning when you start Outlook 2007 and then connect to a mailbox
    that is hosted on a server that is running Exchange Server 2007 or Exchange Server 2010: "The name of the security certificate is invalid or does not match the name of the site"
    URL:
    http://support.microsoft.com/kb/940726
    Regards,
    James
    James Xiong
    TechNet Community Support

  • Exchange 2007 edge server with ironport

    I currently have a frontend exch 2003 and backend exch 2003 server with ironport. my mx record is the ironport which then forwards into the backend server. The frontend server was only used for owa and using outlook with https connection to exchange.
    With 2007 it has more functionality and the front end server is now called an edge server. Should I have mx go there then to ironport or vice versa? I'm thinking ironport to edge server to hub transport server. Is that correct? will it work?
    anyone have exchange 2007 edge server with ironport? what are you doing?

    well that wouldve been nice to know a little earlier. anyway I have ironport successfully sending mail to the edge server who sends it on to the hub transport server. right now the client access server is on the same as the hub but can be easily moved later. this is for very few people so its not like I need to off load anything as its a powerful dual core server. anyway now with the edge server I can test how effective it is versus the ironport. I'll let everyone know when you can ditch the ironport for msft's edge server. (Don't hold your breath).

  • Problem appearing olders emails outlook 2013 with Exchange 2007 SP2

    hi everyone, 
    recently i have problem with user mailbox OST more than 20 Gb (configured with outlook 2013 and exchange 2007 SP2 ) and if i scroll down in the olders mails in the Inbox Folder it's stoped in 2011 but i have more than this year ! i tried to add regedit keys
    such as Maxlargesize... and no changes and tried also with exporting this ost to PST  File (i proceed with computer 32 bits ....) and always stop in 2011
    Please if you have ideas to resolve this 
    best regards 
    vote if you think useful

    Hi,
    OST file is a local copy of your email messages, calendar, and other items that are on the Exchange server, it is always synchronized with the items on the server. So, the first thing we need to check is to login to OWA and check if you can see older
    emails from there.
    If you can't see the old email from OWA, it means the emails are removed from the server. In this case, you'll need to contact your Exchange admin to see if your old emails are archived. We can also check if you have enabled AutoArchive feature in your Outlook,
    which may move your emails from your OST file to a local PST file. See:
    https://support.microsoft.com/kb/830119?wa=wsignin1.0
    If you can see the old emails from OWA, your OST file may be corrupt. We can exit Outlook, find the .OST file and rename it to .old, and then restart Outlook to let it sync a new one. By default, the OST file are save in:
    drive:\Users\%username%\AppData\Local\Microsoft\Outlook
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

    XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

    Hi,
    Did you get any error messages?
    Do you have Outlook Anywhere and autodiscovery set up properly?
    Can you ping the Exchange server?
    Please use Test Email AutoConfiguration
    to test if the Autodiscover service is configured properly. See:
    https://hosting.intermedia.net/support/kb/default.asp?id=2150
    We can also use the remote connectivity analyzer to troubleshoot the issue:
    https://testconnectivity.microsoft.com/
    In addition, turn off your firewall and anti-virus to check the result.
    Hope this helps.
    Best Regards,
    Steve Fan
    TechNet Community Support

Maybe you are looking for

  • HP 6100 printing problem: process pdftopdf consumes huge amounts of RAM

    I did some remote troubleshooting for my uncle's Mac yesterday who had a problem with his MacBookPro. It occured to him last week after trying to print a document with his HP 6100. When I tried to check the problem, the system UI took at least 15 sec

  • Photo Gallery Disappears with ICS

    Trying to use the Photo Gallery after my ICS upgrade today.  It will appear for a second or two, but if I try to create a slideshow or access Gallery Home, it reverts back to camera.  Anyone have an idea how to fix this?

  • 3D: how to move a mesh using JS

    Hi! how to move a mesh using JS in 3d-model (for example, I need to move by 5 pixels in X, Y, Z). Thank you :)

  • Wrap a file into one class

    Hello, I want to wrap a file into one classe, how can I do that? For example: class fileWrapper { one buffer for file content(what kind of buffer here?) Thanks a lot Grace

  • JS RangeError exception happens after click a command link in Chrome22

    Hi, I am using JDev 11.1.1.4. I got an JS exception after click a command link. Following is my steps. 1. use chrome(V22) to access my app 2. refresh page 3. click a command link(with action property) in UI which can jump to another page Result: noth