Can't connect to Exchange Email via Verizon 3G but can on wireless...

For some reason I can connect fine to our exchange server if I have the wireless enabled but I get 'Cannot get mail, connection failed' when I have the wireless turned off and am using the verizon 3G network only. I have 4 bars of signal, too. Anyone else have this problem? Is their something about the verizon network that won't support MS Exchange connections?
{edited for privacy}

I can't help with your issue since I am no expert at Exchange, but I can confirm that mine works just fine on the network.

Similar Messages

I Can't connect to ICloud Server on my PC but can with my IPhone

For several days I can't connect to ICloud on my PC. Error message says there is a problem connecting to the server. Any ideas?

Same problem and they aren't responding

Can I connect to Airport product via Verizon hot spot

Can I use my Airport product connecting to the Internet using my Verizon Hotspot?

Yes, if the Hotspot provides an Ethernet port to connect to the WAN port on the AirPort with an Ethernet cable.
No, if it doesn't.

Email suddenly stopped sending but can still receive on iphone, email suddenly stopped sending but can still receive on iphone

Suddenly and for no apparent reason one of my servers stopped working on my phone and now I cant send emails. All ok on my macbook though.
I have 4 email addresses and they work of 2 mail servers, 1 is fine and the other isnt.
I am really not very computer and techno minded so please talk nicely to me!
Thanks
Emma

Hello Ezyk
There are some things that you can check through Mail, the following article will assist with troubleshooting and getting your email back up and running. The big one to use is Connection Doctor, it will tell you why it cannot connect and get mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I can't access my Google email account on Firefox, but can on Google Chrome: What has happened to Firefox in the last 48 hours to cause this glitch?

Yesterday morning, when I opened Firefox, my home page did not load, and a message indicated I had signed out appeared. When I tried to sign in, I got a message that either my email address or password was incorrect.

Try clearing the cache and deleting Google cookies, this can sometimes help with accessing a site that previously worked. For details see https://support.mozilla.com/kb/How+to+clear+the+cache and https://support.mozilla.com/kb/Deleting+cookies

I can no longer get email on my imac, but can get my messages on my iphone

I can no longer get my email on my imac, but can get them on my iphone & ipad. (sbcglobal.net). It's as if it is frozen. It keeps "recovering" the last email I sent.

I can no longer get my email on my imac, but can get them on my iphone & ipad. (sbcglobal.net). It's as if it is frozen. It keeps "recovering" the last email I sent.

Outlook 2013 can't connect to Exchange 2013 SP1

Hello,
I've already asked that question on Exchange 2013, now I'd like to ask it again in regard to Exchange 2013 SP1.
The question i s very easy: suppose I have just installed Exchange 2013 SP1 (in a Win2012 R2 domain) with three mailboxes (user1, user2, user3). I can successfully run ecp and owa for all users...
...but when I'm starting Outlook 2013 and trying to set up a profile manually, for example, [email protected], Exchange 2013 Sp1 keeps saying "Outlook can't log on...The name cannot be resolved."
In Exchange 2013 this could be fixed by adding the server's ip address to its Hosts file, but I thought it was a bug and it would be corrected later or sooner... Now the same problem with Exchange 2013SP1...
Would anybody please tell me is there anything special I must do to connect to Exchange 2013SP1 via Outlook 2013 (not Outlook 2013SP1 - without MAPI over HTTP)??? If yes what articles can I read about it?
Thank you in advance,
Michael

Hi,
When we automatically configure the account, Autodiscover service will help Outlook find the new type and we don't need to run the command to get the mailbox GUID until we manually configure the profile.
For more information, you can refer to the following article:
http://technet.microsoft.com/en-us/library/bb124251(v=exchg.150).aspx
"Through the Autodiscover service, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address."
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

Windows XP SP3 and Outlook 2010 can't connect with Exchange 2010 or Exchange 2013

XP+SP3+Outlook 2010 can't connect to Exchange 2010&2013 in the internal network without safe mode.

Hi,
Did you get any error messages?
Do you have Outlook Anywhere and autodiscovery set up properly?
Can you ping the Exchange server?
Please use Test Email AutoConfiguration
to test if the Autodiscover service is configured properly. See:
https://hosting.intermedia.net/support/kb/default.asp?id=2150
We can also use the remote connectivity analyzer to troubleshoot the issue:
https://testconnectivity.microsoft.com/
In addition, turn off your firewall and anti-virus to check the result.
Hope this helps.
Best Regards,
Steve Fan
TechNet Community Support

What is required to Exchange integration work - (Can't connect to Exchange Web Server)?

Hi guys,
We have just 'beaten' our Lync installation until it decided to work with mobility, however the clients (IOS) complain that it "Can't connect to Exchange Web Server". Entirely possible its our own fault!
My question is:
What exactly do I need to configure to make this work?
DNS records,
Firewall rules,
etc.
We are running:
Exchange 2010 on-premise
TMG 2010
Cheers
Dave
Dave

Hi Dave,
The Lync 2010 mobile client for iPhone and iPad has a Meeting tab that lists meetings for the day from the Exchange calendar.
The client uses simple Exchange Autodiscover processes to determine the location of the Exchange server of the user who is signed in. The SIP Uniform Resource Identifier (URI) of the user is used in the attempt to discover the Exchange Web Services (EWS) endpoint.
However, if the user’s SIP URI and email address are different, the Autodiscover process will fail, the Meeting tab will be blank, and Exchange Unified Messaging (UM) voicemail in the Phone tab will not sync.
For disjointed email and SIP URIs, the Lync 2010 mobile client for iPhone and iPad lets the user specify a different set of credentials for Exchange integration. For the Exchange Autodiscover process to work correctly, the necessary DNS records must be available.
To confirm that Autodiscover is working, use Microsoft Remote Connectivity Analzyer at http://www.testexchangeconnectivity.com (http://www.testexchangeconnectivity.com/)
In addition, please also refer to this document
Lync 2010 Integration. Hope helps.
Noya Liu
TechNet Community Support

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

Not without a player..
The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

Help Needed i can't connect to the router via VPN

I can not connect to my server via the VPN client i have attached the config. I also havve a bif problem i can't use the webb gui any more and idon't know why.
Thanks i advance

You would need to change the NAT from standard ACL to extended ACL as follows:
access-list 150 deny ip 192.168.1.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 150 permit ip 192.168.1.0 0.0.0.255 any
ip nat inside source list 150 interface ATM0.1 overload
no ip nat inside source list 1 interface ATM0.1 overload

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas?

I can't send emails via mail. I can receive but not send. I have set up gmail on mail. Any ideas? No problems with the set up previously to this.

Go to Mail Preferences- Accounts and confirm you are providing Gmail what they require to send and receive mail. And DON'T specify Secure Socket Layer. Some mail accts don't like SSL
Good Luck to you.

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Can't connect to Exchange Email via Verizon 3G but can on wireless...

Similar Messages

Maybe you are looking for