Can't connect to FaceTime, check your network connection try again
Can't connect to FaceTime, check your network connection an try again keeps coming up when logging in
1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo
Similar Messages
-
Hi
I have MacBook Air , yesterday I tried to use FaceTime but it won't even connect I keep getting this message " please check your network and try again later " my network work perfectly with everything . however FaceTime works on my iPad . can someone please help me with this problem .
thank youFaceTime, Game Center, Messages: Troubleshooting sign in issues
-
IMessage and FaceTime saying "waiting for activation.." I've tried many times and it still says "can't activate check your network and try again later" please help.
Hi, Amandacrossley.
Here is the best article to reference when experiencing issues with iMessage and FaceTime activation issues.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Regards,
Jason H. -
After changing my phone number on iPhone, my iPad will not connect to my iMessage or FaceTime. Keeps giving me this message (Could not sign in. Please check your network and try again). Please help!!!
iPhone 4 and iPod touch (4th generation): Using FaceTime
http://support.apple.com/kb/HT4319
iPhone 4 and iPod touch (4th generation): Using FaceTime behind a firewall
http://support.apple.com/kb/HT4245 -
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
I'm getting an error message "could not sign in check your network and try again
I'm getting an error message "could not sign in check your network and try again" I've tried serval times, today and last night. I'm trying to upload to Go Daddy host. All my PW, Site URL and folder on server are correct /public_html. (I've used them to upload to FileZilla), with no problem except two pages are missing!
I've been using Muse since August with no problems, now it's causing me all sorts of problems!
Help!**** Moving to MUSE Support Portal for quick and accurate Help *****
-
Facetime Could not sign in. Please check your network and try again.
Hi,
I am using IPad Mini and was able to use Facetime without any issue. All of a sudden I started getting this error. My Apple ID is verified and though I go back into facetime through settings and re-enter my user-id and password, it does not work at all.
I also noticed that my IOS is updated to 7.1 through automatic update. I think the update has affected the settings. I am able to use other apps that connect to network without any issues, but facing this issue with facetime.
Any suggestions would be of great help!
Thanks
KVIt may not be an issue at your end.
Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
http://www.apple.com/support/systemstatus/ -
I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
-
Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor ProHello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G -
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Check your settings and try again (37). What is this?
Keep getting the message "there is a problem connecting to the network. Check your settings and try again (37). The Apple TV unit can see the name of my network but will not connect. I have tried to type all the Ip addresses and routers and subnet manually also and have also connected the apple tv unit to the imac and itunes to get the latest software and to restore the unit.
I can operate a laptop in the room so the signal strength is good enough, however when apple tv is on screen it does not show any bars in the signal strength.
I have connected apple tv to a room next to the router and still no luck.
Only think have not tried is a hardwire connection as the router and the tv are not close enough.I don't think you'll see a signal strength indicator until the connection is actually made.
If the AppleTV shows your network name signal must be at least good enough to detect it.
It could be AppleTV is having issues with your wi-fi encryption protocol - what are you using? What kind of router?
AC -
Error Message "Check your settings and try again (-369033213)"
I received a Apple TV for Christmas and went to set it up tonight. I didn't expect it to be easy as my WIFI is WAP2 Enterprise and therefore has a few other hoops to jump through.
I downloaded the latest Apple Configurator and uploaded a profile with the correct credentials.
It all seemed to go fine until the last stage where it asks me to
unplug the mini usb,
unplug the power-cable,
plug in the power cable and wait until the light stops flashing and
replug the mini usb
After doing this it confirms a couple of tasks then stalls ont eh second to last task during configuration and says that the Apple TV couldn't be configured
After a couple of unsuccessful tries I plugged back in the hdmi cable and had a look on the device and the profile was loaded but couldn't connect to network.
I tested the network and got error Check your settings and try again (-369033213).
This appears to be related to the certificates not being added to the profile. These were old posts. Is this still the case?
I am a little surprised it requires the certificates to be added, Phone, laptop and computer all use the same wifi and haven't had any problems.
Is there a workaround? Techs wont be around until January and as I am not an administrator for the network wont be able to get the certificates until then.
ThanksApple need to look into fixing this issue. It's beyond a joke as to why they haven't made Enterprise networking a priority let alon multilicensing in Schools state and worldwide.
If anyone knows a fix that could be altered on certificates, please let me know. Although most schoold environments running a Government based certificate cannot be change or implemented any different than the rest.
Hopefully there's an update fix soon. -
Your address was not recognized. Please check your entry and try again.
I'm trying to register for the free 30 day trial.
I get
"Your address was not recognized. Please check your entry and try again."
My address works fine for the postman, deliveries etc. Another case of a programmer who knows better!
What are the address requirements on the sign-up form, so I can proceed?
PeteHi
Which product do you want to register for? Office 365, SharePoint or Office 2013?
Since this forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office, and your question is related to the free trial registering of Microsoft products, I suggest you posting it in Answers
Forum for more efficient responses.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.
If you purchased the iPhone from Apple or an authorized Apple reseller,
contact them for assistance. If you purchased elsewhere, go back
to that retailer and get them to give you a new iPhone or your money
back.
If you have checked the serial number carefully and re-entered it
and that gave you the same error message, contact Apple if purchased
from Apple or authorized retailer; otherwise you have been scammed
and need to pursue the matter with the business you obtained the
iPhone from. -
Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes. I have checked out various online suggestions but then discovered that the only thing that seems to work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities. I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm! Any suggestions? Thanks!
Post relates to: Tungsten E2Hello!
The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens.
Post relates to: Treo 650 (Unlocked GSM)
Maybe you are looking for
-
What is the best way to hook up an external monitor? Im having some issues!
Up until now I have been able to use my external monitor while editing. I recently got a 20" HDTV with HDMI and a jack to use it as a computer monitor. I notice that once I set my VIEW option to ALL FRAMES in FCP, it will only show me a frame at a ti
-
Refering Cells in webi for calculation
Hi, We have done calculations separately in multiple reports. Please let me know as to how to refer/use those calculated values across any report, for example, where we could use a sum of a report (sum is assigned to a cell) which could be associated
-
I was watching a movie on my iPod and needed to stop. I have the 'Remember last play' option turned on. when I came back later and selected the movie, all I got was a black screen. I did a reset and It erased my entire iPod. I have nothing now. There
-
HI masters. I've a quick question for you, maybe is't a silly one, maybe it's more complicated but right now I don't know hot to solve it: I've a portal environment, lets call it "portal.com" with SSL enabled and I've made the following redirections:
-
Error when compiling Derivative method for Polynomial Class
Hi guys, doing my homework and I am getting this error for my piece of code. Error: Operator * cannot be applied to DataElement,int this is my method public Polynomial derivative(Polynomial q) int size = q.length; int i; doubl