Can't connect to FTP external drive - EA3500

Trying to connect to my external hardrive using FTP app from my phone to test it.
I uncheck the 'filter unwanted traffic box' and even tried switching the port from 21 to 4460.
Can't seem to connect on my iphones brower I get 'server not responding' and any app I use cannot connect.
Using UTF-8 encoding too.
Heres what I type into the browser, "ftp server ip : port"
Any help would be appreciated.

Shouldn't it be?
ftp://192.168.1.1
or
ftp://192.168.1.1:4460
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

Can losing connection with an external drive lead to its failure?

My iTunes library is currently wireless, through my Airport Extreme, so I can use it both with my Macbook Air and my iMac. Of course the downside is only one computer can access it at a time and I'm limited by the range of the Airport, but it works for me... Since my library is too big for iTunes Match anyways and I live in a small appartment it's perfect.
Anyways, my problem is, this setup is fairly new, and a few times yesterday while I was working on adding new music to my library (ripping my CDs in lossless), I got the error message that connection was lost with my iTunes drive!
My internet didn't seem to flinch though, which is weird. But it doesn't seem to be the "the disk was not ejected properly" external disk error that's been going around, as I HAVE that **** problem with another of my drives... (connected via cable) and it's not the same error message.
This one is just saying the connection was lost... like Airport had the hiccups or something.
Time for me to click on "ignore" and I could go back to what I was doing.
Except twice, this happened WHILE a track was importing into iTunes!
The first time, I got an error message saying it was impossible to read or write to the device... I was scared... closed iTunes, re-opened... and it looked like nothing happened! Phew. Even the freshly imported tracks were there, up the to one that was importing when it lost connection, which of course wasn't imported.
But then it happened again... while it was, again, importing...
This time, restarting iTunes didn't cut it.
When I opened Airport Utility to check, I had yellow question mark, and a message saying the attached drive was failing, or corrupted, something like that (can't remember), to plug it directly in my computer and repair it!
I did that, opened Disk Utility... and the drive won't mount.
I tried the few tricks I know, still won't mount.
So now I'm in the middle of creating a disk image on one of my other external drives (it's been hours and only a third has been done, I'm crossing my fingers it doesn't just freeze, give me an error message or tell me there's not enough space... because I couldn't check how much space was used since it wouldn't mount... and it has been a while since I checked).
I'm also in the middle of checking for data recovery with my old StellarPhoenix app... not even sure what it could do or if it still works...
But all that to wonder : can a simple network disconnection be enough to do that???
If so, how come people rely on NAS, how come so many use Airport in conjunction with external drives?! It just doesn't make sense to me...
Maybe this was just a weird coincidence? Or maybe I'm taking the problem the wrong way, and the lost connection happened because the drive was failing? In that case I just find it weird that I didn't see any sign of that while it was connected directly to my iMac, right until a few days ago!
...Gee, I'm tired of buying external drives!
For the curious, this one is a 2TB Samsung (Iomega), bought in december 2010, so just 2 years old.

Thanks edex67!
Now the question would be, are numerous losses of connection in a day normal for Airport Extreme, or is mine failing?
Can't find a model number and the serial doesn't lead anywhere, but I'm pretty sure it dates back to 2008, the second generation.
A small update: Problem seems to definitely be just in the filesystem since after formatting all seems well, while I can't restore with my disk image, as after hours of scanning it, I now get the error message that Disk Utility can't scan it because of an internal error.
Now let's hope I can save the data, because even though I regularly did backups of that disk, I would still lose those hours of new imports and organization I had just done when it failed...
I'l look for Gparted also... thanks!

PC can't connect to AEB external drive, but Mac can.

Until recently I was able to connect to the external hard drive I have attached to my 1 generation Airport Extreme base station, version 5.6.1, running firmware version 7.6.4. It just stopped showing up one day and it gives me errors when I try to connect saying credentials are wrong, but they're not. I've tried everything I could find, including changing some Windows settings, reverting firmware, resets and a lot more. It used to automatically connect at start up, and showed up as a 'Z' drive, and worked great. The drive is fine as well, that was my first concern. I just connected to it from the File Browser app from the app store, and my other Apple devices, MPB, Apple TV, both see it. Just not my Windows 7 pc. This was my last resort after many hours of troubleshooting. Any help would be greatly appreciated, thanks in advance.

Standard network troubleshooting.
1. If you are using wireless plug in by ethernet.. never trust wireless.
2. If the computer gets an IP from the Extreme.. ping the extreme in a command window.. does it respond? It must respond before worrying about all the rest.. Windows can auto decide it is now in a public location and ram up the firewall. Make sure your network location is home.. and if necessary turn off the firewall.. the TC must respond at least by IP.. name as well would be good.
3. Open the Control Panel admin tools and make sure bonjour is running as a service. If it has failed stop and restart it.
4. Try mounting the hard disk directly by IP in windows explorer.
\\10.0.1.1 (replace with the actual IP address).
5. If it is only wireless that is the problem.. you probably had some sneaky windows security patch install and that ruined everything.. windows patches are often 2 steps forward.. 3 backwards.. you can no longer be attacked because you no longer have internet connection!!

Why I can't connect to my external drive?

Dear All,
I'm a very new user to lion Os. I'm now not able to connect to my buffalo 500 gb ext drive. it's showing ' the device you inserted is not readable by this mechine'
what should i do? Kindly please guide me.
Best Regards,
Win

Not sure which Buffalo you have but a quick Google finds this page:
http://www.buffalo-technology.com/knowledgebase/users/kb.php?id=10241&category_i d=0&sid2=
where they have different drivers for Lion.
Regards,
Colin R.

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partition?

Using an external drive with shared files (iPhoto, iTunes), attached to a Time Capsule, can the contents of the external drive be backed-up to the internal Time Capsule drive? Perhaps a RAID1 mirror to a partitioned Time Capsule? I understand that the Time Machine (software) cannot backup a networked drive (the external) and that Time Capsule (the router/wireless hard drive) does not have its own backup software... so it won't backup the connected drive. What I would like is an alternate solution for having an automated backup of a networked drive. A 2TB Time Capsule has more than enough space for Time Machine backups of my family of Macbooks, so I had hoped to mirror a 500GB external drive (with shared media files) to a portion of the Time Capsule internal hard drive. I assume this would require a partition of the Time Capsule drive. If not, would the sparse file from the various computers being backed up need to be copied to the external drive as part of the RAID1 setup? This seems like overkill for the Time Machine backup, but it would cover the media files.

The complexity with this idea is the software has to run from a Mac computer on your network.. so you need a Mac turned on, probably most of the day.
It isn't possible to partition the TC although you can create a image area.
The software would have to copy the material, that means all files to be copied, go from USB drive, back to the Mac, then back to the TC, and written to the drive. In other words you have just added Network congestion, although a proper incremental backup type software will not actually use a lot of capacity.
Finally it will be slow.. network drives are slower than internal drives. Well USB connected drive is much slower than the same drive connected directly to the computer.. and if the drive is connected directly to a computer it can be shared with the network.
http://www.anandtech.com/show/4577/airport-extreme-5th-gen-and-time-capsule-4th- gen-review-faster-wifi-/4
Read carefully the speed of the USB drive plugged into the TC.

Is it OK to use USB 2.0 connection for Glyph external drive and Mac Pro as project drive?

Is it OK to use a USB 2.0 connection for Glyph external drive and Mac Pro as project drive? I was told by Sweetwater tech support to use Firewire, but both the FW400 and FW800 connections crash my audio interface software mixer (Presonus' "Universal Control" software).
Both Firewire connections also create a 10 second hang for each Command-Save that I do.
USB 2.0 for the external drive seems to be working so far, but is there some reason I should be wary of using this as my go-to project drive? In other words, I am imagining that there was probably some definite reason that the tech support guy mentioned not to use it. But maybe not. It's a brand new Glyph. In any event, it's nice to have the 10 second hang eliminated, and I was just looking for some advice, since digging into the Presonus software issue could take some time.

If you have a mac pro, why not stick the external HDD inside via one of your many SATA cables & have it run 9 times faster than your USB?
Or stick a HDD CADDY in your mac pro, so you can slot in a full sized 3TB HDD for recording, and when you are done, pull it out & slip it in an external enclosure if you need to take it places?

Can I Connect a USB Hard Drive Directly to the IX4-300D?

I need to copy large amounts of data from a USB hard drive to the IX4-300D. So can I connect the USB hard drive directly to the USB port on the IX4-300D?
If "yes", how does the USB hard drive show up in Windows so I can select the file to copy?

Hi exceptionalht,
The USB ports are intended for external storage devices such as flash drives and USB hard drives. Once you connect the hard drive to the USB port, the device's content will show up as a new share in the Shares page. You should be able to map that share in Windows or have Storage Manager map it automatically.
To safely remove the external hard drive, go to the External Storage page and click the eject icon for that device.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Can I use a 2tb external drive with Time Machine to backup my Mac Mini (256gbSSD + 2tbHDD)?

Can I use a 2tb external drive with Time Machine to backup what I have on my Mac Mini?
My Mac Mini has one 256 SSD and one 2tb HDD. I want to use Time Machine to do a backup of everything.
Would an external 2tb My Passport Drive by Western Digital work for the backup?
It seems like it would not work because the total storage on the Mac Mini is 2304 gigabytes (SSD + HDD).
And the external Western Digital drive is only 2048 in gigabytes versus 2304 gigabytes the Mac Mini has.

No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.

Can I boot from an external drive with a "Virtual CD"

I just purchased a Hitachi LifeStudio external hard drive for use as my Time Machine backup. When I plugged it in to my MacBook running 10.6.4, I realized that it had one of those "Virtual CDs" that contained the manufacturers crapware, similar to Western Digital's MyWare or whatever its called. It shows up in disk utility as an actual separate disk and not just another partition that can be wiped.
I reformatted the drive using GUID and and created 3 HFS+ Journaled partitions. One was going to be for the 10.6 installer, one for the 10.6 boot, and one for my time machine backup. I restored a 10.6 install dvd disk image I created using disk utility to the 10.6 installer partition (with erase destination checked) then option booted my mac and the partitions did not show up. The only thing I could see was my internal hard drive.
I have done this many times before and it has always worked so Im trying to figure out what Im doing wrong. The only thing I can think of is that the "Virtual CD" that Hitachi put on this external drive is stopping the Mac from seeing the bootable partitions I created. I even went into system preferences>startup disk and blessed the 10.6 install partition. That didn't work either, the computer just booted to my internal drive.
So my questions are. Is it because of this "Virtual CD" that I can't boot from my external drive? If so, is there a way around it? I already searched their web site and emailed their tech support asking for a firmware update to remove the virtual cd.
Thanks in advance.

Yes, it's a known issue. You've already referred to the issue with WD systems. WD has a long list of products that are either not compatible with Macs or won't boot a Mac.
There are practically no problems with bare drives, but once installed in an enclosure there is no guarantee that the package will function as a bootable device. This is especially the case if the manufacturer uses some sort of "virtual" scheme intended for using the device as a sort of one button backup device.
External drives don't have to specifically say anything about being Mac bootable or compatible. It's up to the consumer to verify compatibility and usability.

Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
I noticed that thunderbolt and mini display port looks a like. So, my question is :
can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
thank you

ken94538,
no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

MacBook Air, can I partition my Mac external drive to have an ISO image file location for Windows downloads?

Hi, in preparation for installing bootcamp and windows 7, and in the absence of a DVD drive on my MacBook Air, can I partition my Mac external drive to have an ISO image file location for Windows downloads?

The Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/
The Boot Camp Discussion Community is located here: https://discussions.apple.com/community/windows_software/boot_camp

Can't Access Photos on External Drive

I attach my external drive (Toshiba 320GIG) and open, which gives me the external drive window. I click on Toshiba on the left-hand-side menu, then begin to enter IMG in the search window. As soon as I type the first letter, the menu highlight defaults to my hard drive menu item and I can't search in my external drive. What am I doing wrong?
Thanks for reading. Any help appreciated.
Russ

So, you have two versions of iphoto? One from the old machine and one from the new?
If so, forget about opening with the older version of iPhoto.
For the newer version:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Reset Time Machine connection to an external drive

Hi,
is there a way to tell Time machine to forget a connection to an external drive now set as time machine backup.
Thanks

Hello u:
Go to system preferences>time machine>select disk. Your options are there (including none).
Barry

I can't access my portable external drive anymore.

I can no longer access my external drive. I can see it in the system profiler but not the disk utilities. What should I do?

At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>USB, does it show up there?
No idea why Mobile me is popping up.
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Does the external show up there?

Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?

Time Machine will not let me restore from recent backups. I can see them on the external drive but will not restore sooner that June of 2013! Any suggestions?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Can't connect to FTP external drive - EA3500

Similar Messages

Maybe you are looking for