Can't connect to internet, can't update firmware

HP Envy 110a (D411a) all in one printer
Installed and set up, all went well and works. Tested on Win XP, Vista, Win 7 64, Apple laptop, iPhone 4, all prints wirelessly, or by USB. Now for the problem: It works over my home network, but it will not connect to the internet. No apps will run, nor the update for the firmware. They all say I must be connected to the internet to continue. However, I was able to setup ePrint and go to the eprintcenter.com site, add my printer, and see the status. It said all was good. I had to do this by using the internet, but why will my apps not work, nor the firmware update? Is there a way to download the firmware and install it over the USB? I have a business repairing computers, and have had many problems with the HP wireless printers. I don't recommend any HP products to my customers. But I was impressed with the looks and quality of the Envy, and felt HP might be repenting from their sins, and finally building a quality product. The good is all the wireless printing is working, with little effort. The bad is it is picky about the internet. Anyone have any ideas?
This question was solved.
View Solution.

GOOD NEWS!!!!!!!
I apologize to HP. Yes, they did repent from their past sins! The ENVY 110 is a great printer. I love the size, color, and weight (heavy) of the printer. It looks very professional. The style looks more professional that any printer I have seen to date. Any executive would want this printer. All the features are now working as advertise. How did I fix it? I switched from a Netgear gigabit router to a D-Link gigabit router. Then reconnected the wireless radio to the new network. Then it just started working. I know that the Netgear is still a good router, but something deep in the default settings must have been causing the HP not to work.
I don't work for HP, nor do I own their stock. I strongly recommend this printer for serious users.

Similar Messages

Zen Micro firmware CIRCLE -Can't update firmware w/out driver, can't update driver w/out firmwa

Hi,
I know lots of peopl are having the same problem. I have a Zen Micro 5Gb. I have previously updated the firmware to the plays for sure (about 2 years ago) and it's been fine.
The device had had the hard dri've replaced after it failed, and I need to reload the firmware. I have all the files, I've read all the FAQ and support I used last time (I keep everything) and my notes from 2 years ago say it was easy.
However. Not now. I figure WMP caused a lot of problems. Right - got that out the way. Fresh installs of XP SP2 is the way to go.
I have also followed the instructions here:
http://http://forums.creative.com/showthread.php?t=3478
But, I keep going round in circles. Can't update firmware without driver, can't update driver without firmware.
Any driver install I try asks me to connect the device to complete the installation, but, it won't recognise the device because there is no firmware. I try to upload the firmware, and it says there is no device (because there is no driver).
I have tried multiple machines, with SP2 installed and only WMP9 (never had WMP0).
I have tried USB , 2, hubs, front ports back ports, again on multiple machines.
I've even used an XP install on VMware on a MAC (This was the closest to success).
On the Mac, The player was recognised even in its flash problem state and I could actually start the firmware update. However, it failed to complete successfully.
Has anyone actually managed to do a firmware update on n old Zen using a 2008 PC? Please help!

If your player had PlaysForSure firmware, you'll need to download a PlaysForSure firmware version. That should resolve your issues since PlaysForSure does not use a Creative driver but rather a nati've Windows driver. But you will need to have WMP0 installed, WMP9 does not support PlaysForSure.

Can not update firmware on Officejet Pro 8610

Can't update firmware on Officejet Pro 8610, Hp update site shows available firmware update needed, disabled firewall, shut off wireless, run program, window for update appears, but checkbox greyed out. I've talked to HP Tech, He was positive newer firmware was available, I've tried starting in safe mode w/networking, disabled, MS Security essentials turned off,etc. Have Dell Dimension, excellent running, Windows 7 Home Premium, Xfinity cable network modem (very fast), I'm getting frustrated.
Does anybody have a suggestion? Thanks, Jim

Hi @jwhite8150 , and welcome to the HP Forums!
I see you're having issues updating your firmware. I would like to help!
Before we start I have a request.
Press Setup on the front panel of the printer, and select Reports. In the reports menu select Print Status report. On that report, please let me know what firmware version is listed.
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Can I update firmware on Airport Extreme? If so, how?

Can I update firmware on Airport Extreme? If so, how?

Please check out the following Apple Support article for details on how to update AirPort firmware.

I cannot connect to internet after I update system.

Hi,
I update my system a few day ago (use systemd to replace rc.d) and I cannot connect internet. I guess my router table is broken, but I cannot find any problem.
I use ping to try some IP. And I find I connect to local machine only.
Do I miss some configuration ?
[~]ping -c 3 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2000ms
[~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[ ~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
[ ~]$ route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 172.27.13.254 0.0.0.0 UG 204 0 0 eth2
10.10.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
172.27.12.0 0.0.0.0 255.255.254.0 U 204 0 0 eth2
[~]$ ping 172.27.13.254
PING 172.27.13.254 (172.27.13.254) 56(84) bytes of data.
--- 172.27.13.254 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 999ms
--- 172.27.13.254 ping statistics ---
41 packets transmitted, 0 received, 100% packet loss, time 40131ms

Hi,
I have 2 network interface.
The eth1 is for test only. It is connected to a 8 port LAN switch, and there are 2 NAS connected to this switch.
I use eth2 to connect to internet, for example, update system. I try to disable eth1, but it is still not work.
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
inet 10.10.12.50/24 brd 10.10.12.255 scope global eth1
inet6 fe80::2e0:81ff:fe27:3261/64 scope link
valid_lft forever preferred_lft forever
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
inet 172.27.12.23/23 brd 172.27.13.255 scope global eth2
inet6 fe80::207:e9ff:fe01:a136/64 scope link
valid_lft forever preferred_lft forever
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:60 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:e0:81:27:32:61 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
link/ether 00:07:e9:01:a1:36 brd ff:ff:ff:ff:ff:ff
Last edited by guardkuo (2012-12-22 10:52:35)

HT4623 My iPad is not connecting to internet after software update what can i do

Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
what to do to correct this issue? Please

You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists.
If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

Can't update firmware for Ipod Touch on my PC

I have a 1st gen Ipod touch & windows xp. I have the latest itunes.
It will not let me update the firmare, but I can sync fine.
To update the firmware, I give it to my husband and he can do it from his computer. Then I can sync with no problems. It's just the updating firmware that causes the ipod to crash (1602 error, but occassionally other numbers).
We thought it might have been that I didn't have USB 2 ports, so I bought a USB 2, 4 port card, and my husband helped me install it. Unfortunately this did not solve the problem and it still wont let me update. I thought perhaps because the usb 2 card came with driver disks, it might need a driver. But I checked the driver disk and it contained drivers for strange things I didn't have. Then I checked the internet and it said that with xp the drivers should be automatic with windows update, and mine is all updated, I checked.
I've checked my devices manager list, and the list only contains one "enhanced" usb port, even though the card I have has 4 ports, but maybe I am not understanding how the devices list works.
Just to clarify, have had the same problem with 2 ipod touches. My orignal one got a cracked screen (one crack so covered by warranty) and I received the replacement ipod touch yesterday, and I still could not update the firmware on my PC. My husband had to do it on his PC (vista).
Thanks in advance for any suggestions. I really would like to be able to update the firmware on my own PC, it's geting extremely annoying.

Because I cannot sync my music to my iPhone without updating on my PC which has all my iTunes. Where should I have posted my question to get the help I need?

Azure Virtual Machine cannot connect to Internet addresses following update on 8/7/2014

I've got a Windows Server 2012 virtual machine running in Azure that prior to system updates that were rolled out last week could connect to Internet addresses such as Yahoo.com without issue. I do not currently have any virtual networks configured for this
Azure tenant nor have I modified any of its network settings, so the VM was making the connections with its default network configuration. On August 7, 2014 I rebooted the virtual machine to apply some required system updates to the operating system, and following
that reboot the VM could not longer connect to the Internet. I am able to lookup domains in DNS, but cannot ping those domains from the command line or open web sites via a browser.
I've released its IPconfig via the command line and rebooted the server multiple times, both from within a remote desktop connection and from the Azure Management Portal, but these actions have not resolved the issue.
Are there additional configuration steps I need to take to reconnect this VM to Internet sites, or has something changed which requires me to make further changes?
Thank you,
John
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Just to close this out, I've been able to resolve the issue. It looks like somehow a Windows Update changed the proxy server settings in Internet Options on the server, and that was preventing traffic from successfully leaving the server. Once I removed
that setting, the issue was resolved.
MCITP and MCTS: SharePoint, Virtualization, Project Server 2007
My books on Amazon: The SharePoint 2010 Disaster Recovery Guide and
The SharePoint 2007 Disaster Recovery Guide.
My blog: My Central Admin.

Zen MicroPhoto or Micro stuck in Recovery Mode? Can't update firmware? Try this

I got these instructions from here:
http://blog.opsan.com/archi've/2005/09/3/472.aspx
This is the only thing that worked for me to get my broken Zen MicroPhoto up and running again. It was stuck in Recovery Mode and my XP SP2/WMP laptop wouldn't recognize when trying to load firmware or in Creative Media Explorer or WMP.
To Fix any problems with broken firmware form attempted "playsforsure"
firmware updates etc where your pc finds it as a 20mb dri've and it sits
in recovery mode and does bugger all:
1. Uninstall all creative software & drivers
2. Uninstall Media Player and Media Player runtime (will require a
reboot for each thing). This is done by going to add/remove programs and
uninstalling (this will put your pc back to wmp0).
3. Re-install the Zen Driver from the creative website and reboot (I just reloaded Media Explorer using my ZMP install CD).
4, Plug Zen in.
5, Make sure you have the firmware update ready, run it but don't click
the language bit yet), leave the mouse hovering over your language
selection. (for ZMP, just start firmware exe file, there is no language selection. You can get the firmware update from Creative's site, go to SUPPORT and then DOWNLOADS).
6. On the Zen- select "reload OS" (on ZMP I believe it is Erase or Reload Firmware, something like that, don't have it in front of me).
7. As soon as it flashes up "reload new firmware now via USB" click the
language button
8. Now the pc should find it and allow you to re-load the
firmware. (it may take a few attempts)
9. Once complete, click close and restart the pc. Everything should now
be fine.
0. Once all is working, you can re-install WMP and it will work fine.
I hope this helps somebody.
Message Edited by mdscriber3 on 08-04-2007:2 AM

does that mean when in vista or xp same problem still occurs?
http://storeyourpicture.com/images/s...lectronics.jpg

Nokia 3230: can´t update firmware

hello,
i've just bought a 3230 and i can´t upload 3230's firmware using last PC Suite v.6.83 and Nokia Software Updater.
Can anyone UPDATE this phone firmware?
If you can, please reply. thanks

Hi,
Please contact to Nokia Service Center for doing such update.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

Nokia XM5130 can't update firmware

I can't update my frimware v6.94 to the latest version that I've seen in the web site, i think that update is v7.91. For more information, I did got the update the version v6.94 Over-The-Air. And now I can't update to the latest v7.91. I lived here in the Philippines.

Have you just tried OTA, or have also you tried NSU (nokia software updater) or Ovi suite?
If you have not, I would give NSU a shot!

C5-00 can't update firmware

My C5 is at 031.022. SW update says update available (5111 KB), selecting it and 'start update' I get a brief 'processing' for approx 10 seconds then it stops.
I've tried *#0000# and options, check for updates but get server not responding.
I've also tried latest OVI suite. It tells me I have 031.022 and that I have the latest.
So how do I get an update?

You may also check at
http://www.nokia.co.in/support/download-software/device-software-update/can-i-update
whether an update is available.. Availability depends on Product code / Region..also if the phone is Network locked, its possible only after the Operator's approval.. If update is available but you are not able to get the try different ways.. Thru' Nokia Software Updater (link in one of the posts above..), thru' OVI Suite
http://www.nokia.co.in/support/download-software/nokia-ovi-suite
..or directly thru' your phone, by going to Software update menu..
If all these fail and you still WANT to update, you may try the Nokia Care...
Warning : Before starting the Update process, a back-up of your data is always recommended..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Can't update firmware from 7.4.1 to 7.4.2

I have an AirPort Express with 802.11n, working fine. Every once in a while, AirPort Utility pops up and tells me that it found that AirPort Express and "This AirPort Express should be updated to a newer firmware version. Current Version: 7.4.1 Available Version: 7.4.2"
So, I click on Update Firmware... and it seems to do it - meaning that it takes a few minutes, reports success, and restarts the Airport Express.
BUT - when it comes back up, it is still showing that it is running 7.4.1.
What can I do to get 7.4.2 on this AirPort Express? What's wrong?
Thanks!

I write in this thread because I think my situation is related, even if a bit different.
I had many problems with the update of my Airport Express. It started noticing I had to update the firmware to the 7.4.2 and but I've never been able doing it. As it worked fine even with the permament notification I didn't thought it was a great problem.
Then I update my OS from the 10.4.10 to the 10.6 all in one and started having more problems with my Airport Express which was constantly asking to update to the 7.4.2 but it wasn't possible in any way.
I checked this page in the Apple support
http://support.apple.com/kb/HT3486
and I updated the Utility Airport app to the 5.5.1 but it didn't help.
The worst level of problem is that I tried to link another two people (one with a mac 10.5 and one with a pc) to the wireless net and there was not access possibility.
After a reset of the airport the utility app was almost totally blocked and closed the access even from my mac notifing that my WAP password was incorrect.
At this time there are no ways to change this situation.
I'm trying to understand what's the real problem and - if someone has suggestions - how to solve it.

Cant connect to internet after ios6 update

cant connect to internet after ios6 update

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Nokia N96 can't update firmware

I have Nokia N96-1 with 20.050 firmware. I checked my code is 0543719 and the 'Can I update' link said i can, to version 30.033. I tried updating from my phone, it said No updates available. I have the latest NUS and it can't identify my device. What now?

http://www.nokia.co.in/support/download-software/device-software-update/can-i-update
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Can't update firmware on my early 2011 MBP

I haven't been able to update firmware on my laptop. It will download and attempt, but when the computer restarts, it restarts over and over and over again on its own until I hard power down. Then when it restarts, it starts up like normal but doesn't install the firmware. I had installed Kingston memory at one point and when I presented this issue to the Genius bar, they kept it a few days and tested it with "known working ram" and they were able to update the last firmware revision. So I ditched the Kingston and put in Centon, which claims full compatibility. Now, firmware 2.7 is giving me the same issue. Is it really the RAM? Anyone else who used 3rd party memory having this same problem?
Help!!

Hello EveryBody To update your Nokia 2700, DON'T USE "nokia software update" directly. You'll have to install NOKIA OVI SUITE, then sign in with your account ou register. Afterwards update your 2700 via the update option of OVI SUITE. I just tested it and it works

Can't connect to internet, can't update firmware

Similar Messages

Maybe you are looking for