Can't connect to Internet on my ipad

Can't connect to Internet on my ipad I've tried everything nothing is working. All my other electronic s are working except the ipad help

I don't know what you mean by "everything", but here is a comprehensive Wi-Fi troubleshooting guide:
http://www.apple.com/support/ipad/wifi/

Similar Messages

  • TS1398 I have connected my iPad 2 to my Mac Air over blue tooth.  Booth say they are connected to each other.  But I can not access the internet on the IPAD.  I can connect over blue tooth from my iPhone to my iPad with no issue.  Any thoughts?  Thank you

    I am trying to connect my Ipad 2 to my Mac Air over bluetooth.
    I can connect them to each other, and both machines say they are connected over bluetooth.
    However I can not access the internet on the Ipad...says it is not connected to the internet.
    Does anyone know if you can fix this?
    THank you

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • 5 out of 6 devices can't connect to Internet

    Just to preface,  this was all working hours ago.
    airport express,  Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
    my Samsung Galaxy s3 has no problems however.
    normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
    Any ideas would be greatly appreciated.

    You want the device that is directly connected to the modem to furnish the PPPoE service.
    This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
    But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
    Open AirPort Utility - Click Manual Setup
    Click the Internet icon
    Your settings should look like this:
    Connect Using = PPPoE   
    Account Name = Your user name with your ISP
    Password = Your password with the ISP
    Verify Password
    Service Name.....leave this area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings and the TC will restart
    Either delete the PPPoE connection on your Mac, or if  you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
    If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
    Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
    Wait a moment or two, then start the modem and let it urn for a moment by itself
    Start the TC and wait for a green light
    Then start each device one at a time until the network is back up

  • HT1349 I can't connect to iTunes on my iPad

    I can't connect to iTunes on my iPad
    I purchased something from apes and did not get it. I got the bill and wanted to challenge the charge and the link won't let me connect.

    It is NOT a hardware/software issue.
    It is a nation wide itunes app and music issue.
    There are reports of this all over the internet and Apple will not or can not respond.
    Please STOP sending people to the same worthless "support" page.

  • Can't connect to internet sharing

    Ever since updating to Mountain Lion on my iMac, I can't connect to internet sharing with my iPad 3.    Does anyone know how to get it to work?  I just get the message 'Unable to join the network 'xxxx'.
    I've tried setting up new networks, I've tried it with and without passwords, restarted both machines, and it still won't work. 
    However, my iphone4 connects OK.  Anyone else having this issue with the iPad 3?
    Thanks
    Bob

    It's so simple to setup and you have been using it in the past, but just in case, this is Apple' kb article about Internet sharing with Mountain Lion.
    http://support.apple.com/kb/PH10740?viewlocale=en_US
    Have you rebooted your router or cable modem? Unplug it from power for about 30 seconds and plug it in again.
    You might be better off posting in the Mountain Lion forum if you haven't already done so.
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • Adobe cloud application manager - can not connect to internet

    To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
    The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct  - Sydney Australia
    Question:
         1. Is anybody else having this problem
         2. How do we fix
    I already changed the time zone east coast US - did not change anything
    Could it be a corrupt program - thus requiring to reinstall program Application manager
    I am using Windows 7.
    It has been like it for ten days - It asks to log in everytime I turn computer on
    All programs in Creative Cloud work
    Any suggestions and solution
    Online help and phone help had no solutions other than what I suggested - that is reload application manager
    Thanks for help
    Ian Cleland

    The Creative Cloud File Synching was just offline, should be online now again.
    See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
    Maybe that was your problem.

  • Ipad2 -can i connect to internet  using a data card

    ipad2 -can i connect to internet  using a data card

    This article:
    http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
    depending on your experience level should tell you all you need to know.
    You don't need mobile me, you just need to know your mac's ip and have vnc
    client software of some sort running on the machine you are travelling with.
    Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

  • Can't connect to internet on my old g4 flat screen, network + airport ok

    I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

    Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
    If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
    If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

    After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
    They can't connect via wifi neither via 3G.
    If I restart the devices they start to connect again.
    I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me,  but the issue still persists.
    I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
    Anyone has having the same issue?

    After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
    See if that helps.
    Good Luck!

  • How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    How can I connect the iTunes in my iPad (now with iOS7) to my Power PC Mac?

    Nope, the top OS version for the IBM processor is 10.5.8, and under that version I can not update the iTunes further than the 10.6.3 :-(
    But that means the brand leaves a large chunch os costumers with still perfectly operating computers out of the loop on purpose, so to force us to upgrade computer?
    Not fair at all, both are legitimate Apple products, they should sync no matter what! The sad thing is theu used to, before I migrated to iOS7 on the iPad, move that I now regret...

  • Can I connect the iphone 3gs with ipad 2?

    Hallo
    can I connect the iphone 3gs with ipad 2?

    You can connect it to use the iPhone as a personal hotspot for the iPad, or to transfer photos/videos via the camera connection kit. You can't connect them in order to transfer music, documents etc.

  • Can't connect to Internet after sleep mode

    Hi,
    Most times after put my iBook in sleep mode and reopen it, I can't connect to Internet. I use a normal cable connection by ethernet, but at these times, when I check the network status, it says I don't have any cable connected. The modem apears to be OK, with the computer's light on. I plug off and plug in the cable and it doesn't change and it happens the same when I click in DHCP renew - it just doesn't give any IP adreess. I need to restart the computer to get the connection again.
    Ibook G3 700   Mac OS X (10.4.7)  

    I am trying other solutions today.
    It can not change to another wifi network without switch off the wifi.
    That's mean I have switch off and re-open the wifi signal every time when it show like this capture.
    I waiting for more than 5 mins and it will search another wifi network automatically but it still "No internet connect".
    My MacBook Pro is no any WiFi issues.

Maybe you are looking for

  • Part1 is not Generating for Vendor Subsequent Delivery

    Hi ASAP I hope you must be doing great; steps are as follow which Iu2019m following for vendor return and subsequent delivery for Raw / Capital goods. 1. PO -> MIGO (101) -> Excise capture & Posting using J1IEX -> MIRO. For excise, part1 & 2 to relev

  • Uploading xml file in a background job .

    Hi Experts , I am uploading a xml file from application server to internal table . While uploading from presentation server I get the value of stream as ( first few lines ) Case 1 : ?<?xml version="1.0" encoding="utf-16" standalone= "yes"?><WPUBON01>

  • Office 2013 - SharePoint Web App: How can I link a subform on two Master/Child controls?

    I have a form in which I have placed a subform in a SharePoint Web App. I also have 2 controls on the form, from which I'd like to link to two columns on the subform.  How can I have two Master/Child linking relationships to a subform.  In Access des

  • Selection from logical database.

    The question is simple. =) Wy does the second part works but not the first one. Isn't it possible to do like that. Anyone that can help with how i can do?  <b>Event : start-of-selection employees not connected to position</b> rp-provide-from-last p00

  • EJB Exceptions generate entry in trace file

    Every exception I throw an exception from an EJB generates a stack trace in the oracle trace file. These are business rule errors like "Withdrawal Denied: Insuffient Funds". Can I turn this off? The J2EE spec says that the container should notify whe