Can't connect to internet on tv using wireless bridge

I configured my linksys wireless bridge to be able to connect to the internet on my TV.  I am wondering if I have some connections or ports or something on my airport router that aren't right.  I've called Direct TV, Linksys, and now, my last hope is that it is something with my airport settings.  HELP Anyone?
Linksys Wireless bridge model WET-610 n

Ok, I'm going to see if I can download a copy of the WET160N User Guide. In the mean time, I would like for you to provide me some configuration information on your 802.11n AirPort Extreme Base Station (AEBSn) using the AirPort Utility in Manual Setup mode.
AirPort Utility > Select the AEBSn > Manual Setup
AirPort > Wireless tab
Wireless Mode = ?
Radio Mode = ?
Radio Channel Selection = ?
AirPort > Wireless tab > Wireless Network Options
Create a closed network = checked or unchecked?
Internet > Internet Connection tab
Connect Using = ?
Connection Sharing = ?
Internet > TCP/IP tab
Configure IPv4 = ?
Internet > DHCP tab
DHCP Beginning Address = ?

Similar Messages

  • Can't connect to Internet after sleep mode

    Hi,
    Most times after put my iBook in sleep mode and reopen it, I can't connect to Internet. I use a normal cable connection by ethernet, but at these times, when I check the network status, it says I don't have any cable connected. The modem apears to be OK, with the computer's light on. I plug off and plug in the cable and it doesn't change and it happens the same when I click in DHCP renew - it just doesn't give any IP adreess. I need to restart the computer to get the connection again.
    Ibook G3 700   Mac OS X (10.4.7)  

    I am trying other solutions today.
    It can not change to another wifi network without switch off the wifi.
    That's mean I have switch off and re-open the wifi signal every time when it show like this capture.
    I waiting for more than 5 mins and it will search another wifi network automatically but it still "No internet connect".
    My MacBook Pro is no any WiFi issues.

  • Ipad2 -can i connect to internet  using a data card

    ipad2 -can i connect to internet  using a data card

    This article:
    http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
    depending on your experience level should tell you all you need to know.
    You don't need mobile me, you just need to know your mac's ip and have vnc
    client software of some sort running on the machine you are travelling with.
    Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

  • After I installed the Moare recording, the firefox can't connect to internet. BTW I used the proxy and it works fine in another browse.

    After I installed the Moare recording, the firefox can't connect to internet. It worked fine before I installed Moare.
    I used the proxy and it works fine in another browse.

    I can not find "Moare recording" on the internet. Please see the following thread for troubleshooting. [https://support.mozilla.org/en-US/questions/935081?esab=a&s=proxies&r=3&as=s following thread;]

  • Adobe cloud application manager - can not connect to internet

    To ADOBE - The Adode cloud Order no is DSSY006786009DT and is current
    The Adobe cloud application manager - can not connect to internet even though there is internet connection and says it might be time zone error but that is correct  - Sydney Australia
    Question:
         1. Is anybody else having this problem
         2. How do we fix
    I already changed the time zone east coast US - did not change anything
    Could it be a corrupt program - thus requiring to reinstall program Application manager
    I am using Windows 7.
    It has been like it for ten days - It asks to log in everytime I turn computer on
    All programs in Creative Cloud work
    Any suggestions and solution
    Online help and phone help had no solutions other than what I suggested - that is reload application manager
    Thanks for help
    Ian Cleland

    The Creative Cloud File Synching was just offline, should be online now again.
    See top off: http://forums.adobe.com/community/creative_cloud/creative_cloud_connection
    Maybe that was your problem.

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • Can't connect to Internet via Airport

    I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
    The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
    Anyone can help?

    By power downs do you mean Sleep?
    One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

  • IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

    After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
    They can't connect via wifi neither via 3G.
    If I restart the devices they start to connect again.
    I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me,  but the issue still persists.
    I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
    Anyone has having the same issue?

    After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
    See if that helps.
    Good Luck!

  • 5 out of 6 devices can't connect to Internet

    Just to preface,  this was all working hours ago.
    airport express,  Mac book pro, ipad, boxee box and Western digital live Nas all can't connect to internet.
    my Samsung Galaxy s3 has no problems however.
    normally if I can't get an ip address I would just say the Internet is down from the isp. But because I've got one device where it's working fine gives me cause to think otherwise.
    Any ideas would be greatly appreciated.

    You want the device that is directly connected to the modem to furnish the PPPoE service.
    This is sounding like you had your Mac connected directly to your modem at one time, so in that type of setup, the PPPoE connection on the Mac would have been correct.
    But, since you have added the Time Capsule....and it is now the device that is directly connected to the modem.... the Time Capsule must be configured to provide the PPPoE connection service, not your Mac.
    Open AirPort Utility - Click Manual Setup
    Click the Internet icon
    Your settings should look like this:
    Connect Using = PPPoE   
    Account Name = Your user name with your ISP
    Password = Your password with the ISP
    Verify Password
    Service Name.....leave this area completely blank
    Connection = Always On
    Disconnect if Idle = Never
    Update to save settings and the TC will restart
    Either delete the PPPoE connection on your Mac, or if  you want to retain it in case you need to connect your Mac directly to the modem at some point in the future, make that connection inactive.
    If you are connecting an Ethernet cable from one of the LAN <-> ports on the TC to your Mac, you want the Ethernet connection to be active on your Mac. This should happen automatically if the PPPoE connection is inactive or has been deleted.
    Be sure to power cycle the entire network at this point. Power all devices down, or der is not important.
    Wait a moment or two, then start the modem and let it urn for a moment by itself
    Start the TC and wait for a green light
    Then start each device one at a time until the network is back up

  • Airport card working but can't connect to internet

    hi all,
    airport card (just plain airport card) is working and is connected to a verizon fios router. signal very strong. just can't connect to internet via safari, camino or firefox. running 10.3.9 os. i've rebooted twice to no avail.
    altho, i can connect on my g4 powerbook using the same router.
    why isn't the g4 flat panel imac connecting? any ideas?

    In the Network system preference panel, is the wireless component
    selected and in the list of items in the configuration the Mac sees?
    You can drag the item(s) into preferred order of use, if there is more
    than one, ie: dialup modem, ethernet connection, airport base.
    If both computers have a similar operating system, it may be an
    idea to look carefully into each, and not change anything in the
    one which appears to work correctly; to look for differences.
    Does the wireless router provide support for 802.11/b as well
    as wi-fi 802.11/g? The older airport card runs on the older spec.

  • WRT54G can''t connect to internet or 192.168.1.1

    My router used to work. I updated the firmware to 4.21. xx and after that I can't connect to internet.
    When I connect directly to modem, I can go to the internet . I power recycled etc but when I connect to the router, it says limited connectivity.  It shows autoconfigurtion ip:169.254.251.135
    I don't know why this is so.
    I don't have the setup cd disk but I read the users' guide and it seems that I really don;t  need the cd. But no matter what I do , I can't get to 192.168.1.1 .
    Do I need a setup cd and where I can download?
    Any help is appreciated.
    Thanks ,
    Sankar

    Do the 30/30/30 Hard Reset and then check the IP address on that computer. For the reset steps do the following:
    The following procedure will clear out the NVRAM and set Router back to default values:
    With the unit powered on, press and hold the reset button on back of unit for 30 seconds
    Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
    Plug the unit back in STILL holding the reset button a final 30 seconds....
    If still you are getting same IP address then try to reduce the LAN card speed. Here is the step:
    START--> right-click My Network Places and click Properties
    right-click on the device and click properties
    Click on the CONFIGURE button
    Select the ADVANCED tab and the settings you can alter are listed on the left.

  • Full coverage with 3G Coverage can't connect to internet

    Full bar with 3G COVERAGE can't connect to Internet. This goes the same with personal hotspot and the internet browser and apps that required internet. After reset by pressing the "on/off button" + "home" button , "RESET ALL NETWORK" , or even restarting the phones , after sometimes of normal operations it's back to the same cycle.
    I'm using iPhone 5s with iOS 7.1.
    Anyone have any solutions?
    Thank you.

    Hi,
    If the router isn't in guarantee,the RESET Button is electric contact maker,if you dont do that before,dont do it - open router,see on the plate where are weld a  reset button's pins,set the contact between them and hold for a 30-40 may be a minute,and it should go to reseting.But if you dont do that before,dont do it and now.
    In the resset button have 2 wafers,if they are oxidated,they cant doing a el.contact.
    Good Luck!!!!
    Thanks
    Kind Regards
    ing.George Gochev
    DSL and Telecommunications Engineer

  • Can't connect to Internet thru WRT300N

    Hi all, I can't connect to the Internet thru my WRT300N after a few reboot after I have setup the Router. I use the normal WEP, Mac address filtering and SSID (VADER) broadcast setting. 
    When the problems happen, I can't connect to the Internet either thru Wire (Port) or Wireless. But my PCs is shown connected to my Router.  Without turning off the Router and Modem, I set the Router to Factory Default and the Internet Connections came back immediately.
    I have tried upgrading the Router's Firmware to the lastest and and did a setup again. The problem came back after a few reboot.
    Is there anything that I have done wrong or have not did ?  Please advise. Thank you all.

    Thank you for the reply.
    It happens to both Wired and Wireless even though both shown connected to the Router. But noticed that when it happens, the router can't communicate with the DNS Server, that's may explain why I can't connect to Internet.
    Both without shutting down both Modem and Router, I reset the Router, either by hard or soft, the Internet Connection comes back immediately.

  • Can't connect to internet sharing

    Ever since updating to Mountain Lion on my iMac, I can't connect to internet sharing with my iPad 3.    Does anyone know how to get it to work?  I just get the message 'Unable to join the network 'xxxx'.
    I've tried setting up new networks, I've tried it with and without passwords, restarted both machines, and it still won't work. 
    However, my iphone4 connects OK.  Anyone else having this issue with the iPad 3?
    Thanks
    Bob

    It's so simple to setup and you have been using it in the past, but just in case, this is Apple' kb article about Internet sharing with Mountain Lion.
    http://support.apple.com/kb/PH10740?viewlocale=en_US
    Have you rebooted your router or cable modem? Unplug it from power for about 30 seconds and plug it in again.
    You might be better off posting in the Mountain Lion forum if you haven't already done so.
    https://discussions.apple.com/community/mac_os/os_x_mountain_lion

  • Can't connect to internet on my old g4 flat screen, network + airport ok

    I installed an airport card on the g4 (dome) and connected to our wireless network, which gets a signal, (though the status is "not available"). I can't connect to internet (server not recognized), and every time I check the internet assistant app, the setting has been changed back to modem. The router is in the basement: my iMac is on the first floor and works fine, the g4 is on the second floor. Is that too far away? Do I need to update the g4? Two minis also work fine, one on first floor and one in basement. Any help appreciated.

    Which iMac G4 do you have? Some iMac G4s are 802.11b while the later ones were 802.11b/g.
    If your wireless network is configured for "802.11g only", the older 802.11b iMac G4 won't be able to connect.
    If your wireless network is configured for "802.11n only", the iMac G4 won't be able to connect since it isn't compatible with that.

Maybe you are looking for