Can't Connect to Internet using AirPort Extreme Card and DLink Router

I have tried just about everything, but I can't seem to connect my MAC OS X 10.3.9 to the internet. I am using the Airport Extreme Card and no networks show up. I am trying to connect to my DLink router. I was told by DLink that it is compatible with AirPort Extreme cards, but the guys at Best Buy were unable to connect to their wireless routers, other than their Mac Router. Please let me know if you have a solution! Thanks

dannabee, Welcome to the discussion area!
What Mac do you have?
Do you have iMac G5 or a Power Mac G5?
Did you install the AirPort Extreme card yourself?

Similar Messages

Can't get security to work - Airport Extreme card and Netgear router

This apparently is not as simple an issue as I expected, so I would appreciate some help.
I just got dsl and a Netgear WGT624 wireless router to connect my wife's iBook G4 with AirPort Extreme card. I used a wired-in pc to set up the router via the web interface and can connect the iBook to the web wirelessly as long as I have security disabled. When I attempt to set WEP or WPA the connection fails.
Initially, I assumed I just was missing something in the AirPort setup, even after looking through all the documentation I could find. I upgraded yesterday from 10.3.3 to 10.3.9, just to see, but had no improvement.
If I select "WPA-PSK(TKIP)" in the router, it asks for a password, which I also then enter to login to the selected network via Internet Connect. I get "there was an error joining..."
If I select "WEP" with 64 bit and shared key options, use the same password to automatically generate the assorted keys, I am not sure what to enter to login. I have received incorrect password messages or no response at all.
I would appreciate any further direction or suggestions.
Thanks
iBook G4 Mac OS X (10.3.3)

One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
WPA
"WPA Personal" on the Mac corresponds to plain WPA, with a pre-shared key (PSK) and TKIP encryption, on non-Apple wireless routers. The same alphanumeric password should work on both.

Ipad2 -can i connect to internet using a data card

ipad2 -can i connect to internet using a data card

This article:
http://edcommunity.apple.com/ali/story.php?itemID=18585&version=6330&pageID=1582 9
depending on your experience level should tell you all you need to know.
You don't need mobile me, you just need to know your mac's ip and have vnc
client software of some sort running on the machine you are travelling with.
Read the entire article, as once you get past the part about monitoring multiple machines there is some useful info.

Can't connect windows xp using airport extreme to internet

Hi i just purchased my airport extreme base station. I tried connecting it to my windows xp for internet and so i can have wireless connection to my macbook.
Im using timewarner cable as my ISP connected through ethernet. I choose DHCP in the configuration to detect IP address provided but I couldn't connect and it tells me invalid IP address.. (i followed the instruction from the manual)... I tried to do it manually then I typed my IP address,but it asks for
1. Subnet Mask- not sure so I just went by whats default which is 255.255.0.0
2. router address- I dont know where to get this.. tried 10.0.1.1, 10.0.1.2, 192.168... no clue where to get this...
The light was on amber when I used DHCP (automatic)- which gives me error of wrong IP address
After I did it manually with my IP address its now green still no internet connection (problem is probably subnet mask and router address)
can anybody help please?
HP 1240n Windows XP Macbook
HP 1240n Windows XP Macbook

Ace83, Welcome to the discussion area!
I tried connecting it to my windows xp for internet...
The cable modem should be powered off and connected to the WAN port on the AirPort Extreme base station (AEBS). The PC should be connected to one of the AEBS's LAN ports.
Configure the AEBS to use the same settings as the PC was using to connect to the Internet. The PC should now be configured to use DHCP and Ethernet to get on the Internet.

Can't connect to internet via AirPort Extreme with Laptop running Vista

I've seen a lot of posts on this topic, and maybe I'm just out of luck, but anyway...
My PC running XP can connect to the internet through the AirPort Extreme, but laptop will not. I load the AirPort Utility on the laptop. Should I be able to see the base when I run the Utility? It does not see it. I can see the wireless network with excellent strength, but all I can do.
If I can't get this to work, I'm going to just return it and to back to the wireless router. I was enticed by the ability to connect the printer and external hard drive to the base. I would like to get rid of the PC and just use my laptop for everything.

Looking over your original post again, I think I might have misunderstood you the first time. If I understand you correctly, your Vista laptop can see the wireless network and connect to it (so you have access to the Internet), but you cannot see the Airport Extreme Base Station when using Airport Utility.
If your Internet connectivity is not an issue and it's just that you can't see the base station in Airport Utility to configure it, try using an ethernet cable to connect your Vista laptop to one of the LAN ports and see if the base station shows up in Airport Utility then.

Can't connect to internet through airport extreme but have full signal

I've seen a lot of posts but I still can't connect wirelessly via airport extreme.
Using a Powerbook running 10.6.4, I have updated the airport extreme's firmware and have a full signal strength, but I can't connect to the internet.
I get an error message that it can't find the server.
I can get online if I connect the internet cable directly to my computer.
so..
Airport is working
Internet is working
Wireless is not working
suggestions?

Robin Berman wrote:
I still can't connect wirelessly via airport extreme.
Using a Powerbook running 10.6.4
That's not possible. Do you mean "MacBook"?
I ... have a full signal strength, but I can't connect to the internet.
First try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
If that doesn't help, connect to your wireless network, then open the Network panel of System Preferences. Select the AirPort connection item, click on the "Advanced" button, then on the "TCP/IP" tab. What do you see for the three values below "Configure IPv4"? Now click on the "DNS" tab. What do you see for "DNS Servers"?
Finally, type this URL in the address bar of your browser:
http://74.125.157.99/
and press "return". Does that take you to Google? If so, there's something wrong with the way your computer or router is handling DNS lookups.

Can't connect to Internet using airport

I am trying to connect to internet wirelessly, using my Airport Extreme (802.11n), but it won't work. When I use the ethernet cable directly to my MacBook Pro (as I am now) internet comes fine. I have done many tests, change configuration, but nothing works. I really don't know what the problem is and what to do.
Thks for helping,
Marco

Just as an update, I have been able to reestablish connection by resetting the airport base.

Mac connected but PC can't connect to internet through Airport Extreme

When I was using a dial-up connection everything worked fine on both computers but since I changed to a PPPoE / Ethernet connection my PC using Windows XP can't connect to the internet although is connected to the Airport with excellent signal.
In System Preferences>Network I have Connect using PPPoE option checked so I can't see my airport in the Airport Admin Utility. Apple Talk is Inactive.
In System Preferences>Sharing>Internet: Internet sharing is Off and there's a text that it can't be turned on "because there are no ports available over which to share your connection"

I understand, but for some reason, that I'm trying to
figure out, when I uncheck the PPPoE option on my
computer and my base station appears in the Admin
utility, I loose my internet connection on the
macintosh although the Network Status says that I'm
connected to the internet via Airport...
You will need to configure the Airport to connect via PPPoE.
iFelix

Problems connecting to Internet using Airport - can anyone help ?

I'm using a MacBook running OSX 10.4.11, trying to connect to internet using Airport. I connected OK first time, but after powering off the Mac, each time I now try to connect again, the Mac can't find the network. Network Diagnostics can't fix it either. I use a Linksys wireless router, connected to an ADSL modem. I use PPPoE. I live in Borneo, and the line connection is not great, occasionally the phone line drops out and then modem reconnects itself, I wonder whether this is causing some sort of problem with IP settings. The only way I can connect wirelessly is to start the Mac, reboot the modem, then the router, and plough through Network Diagnostics. A real pain. Help much appreciated.

I have a Linksys Wireless-G (model WRT54GS). This is working ok because I have two other wireless devices (internet radio and iPod touch) which connect fine. Firmware is up to date. I've done a bit more troubleshooting, and the the problem is connected with the phone line, which drops out all too regularly. Each time the phone line drops out, the Mac is unable to connect to the network wirelessly. After going through Network diagnostics, and rebooting the modem+router, it comes with a message saying "Network changes detected", and then I can reconnect OK. The funny thing is, the IPod touch can always reconnect no problem, even if the line has dropped out since the last login. Given that I've got a crappy phone line conection, is this normal or is there something wrong with my Mac settings ?

Can't connect to Internet via Airport

I have a PPPOE ISP account. Before upgrade to Lepoard, just fine. Now I can only connect to internet using cable via my router moderm. I cannot connect my wireless router.
The wireless router will appear to be connected but it said self assigned IP. If I hardcode an IP eg. 192.168.11.2 to it. The Airport status will become connected but still cannot dial into my PPPOE account. An message no PPPOE service will appear. But if I plug in the LAN cable, everything work fine. Why this happen? My wireless router work fine with my Window XP and my Mac (before upgrade to Lepoard) What configuration should I change? I am an idot to networking. I have download all patch and has tried boot to safe mode etc.
Anyone can help?

By power downs do you mean Sleep?
One thing that might work is to set the IP to Static in Network>Configure IPv4>DHCP with Manual Address.

Cant connect to internet using airport?!!!

Hi,
Suddenly and out of nothing, I just dont seem to be able to get connect to internet using airport. I restarted all devices but it still not working. Though I can connect to my wireless network using airport, I cant use the internet. I can use the internet from other devices and I've already checked my settings.
Thanks

Hi - what do you mean when you say that you "installed Airport Express on laptop" - do you mean "with your laptop using the Windows 7 version of the Airport Utility? - and what wireless router are you referring to? - if you clarify these issues, maybe someone can help you

Can't connect to internet using Nokia Suite

Hello. I have a Nokia Asha 311. I could connect to internet using my USB cable and Nokia Suite without trouble in another computer similar to the one I'm using now. The difference is that that computer had windows 7 and this one has Windows xp (probably there are more differences, but this is the most noticeable). I have Nokia Suite version 3.8.48, it recognizes my phone, but everytime I tried to connect to the internet using the phone as modem, it says, inmediately (it isn't even trying to connect) "Failed to establish a network connection"
What can I do? If I was able to use my Nokia Asha 311 in the other computer as a modem, I'm sure I can use here too for that. But there is something preventing it from working well. What can it be? I have already read the other posts about similar issues but I haven't found any solution in them.

Hi overo,
Welcome to the forum!
Is the OS of your Windows XP PC updated? It's advisable to keep both PC and phone's software up-to-date. Try also to repair Nokia Suite to isolate the issue. Just click the PC's start button, and then go to All Programs > Control Panel > Installed applications. Select Nokia Suite, and then choose Uninstall / Change > Repair. After this step, try to share our phone's connection to your PC and see if it'll work. Make sure that Nokia Suite mode is selected in your Asha 311 when sharing the internet connection to your PC via Nokia Suite.
Let us know how it will go.

Setting up airport extreme card and airport extreme base station

I have an ibook G4 about 3 years old with osx10.4.10 recently installed. I have recently bought an airport extreme card and have also bought an airport extreme base station.
There seems to be a problem with the set up of the card. It does not seem to find any wireless networks at all, including the base station. The base station seems to be working as I went through setting this up with Apple phone support and we managed to do it by connecting the laptop to the base station with an ethernet cable.
I think the problem is with the card. I think I need to reinstall and set up the card again from scratch, but can't figure out how to do this -aiport utility and airport setup assistant don't seem to help here as they take you straight to the stage of setting up a base station. I seem to remember when I originally installed the card for the very first time (before attempting to set up the base station) that it did find other wireless networks, so I don't think there is a physical problem with the card.
Any suggestions on getting the card working appreciated.
Many thanks

Hello bblairlondon. Welcome to the Apple Discussions!
First, verify if OS X "recognizes" the card, by using the System Profiler utility. Select the AirPort Card option under Network in the column on the left. The "Wireless Card Type" should be "AirPort Extreme (nxnnnn, nxnnnn)."
If no card appears, I suggest that you double-check your AirPort Extreme Card installation by using the following Apple Tech article: iBook G4: CIP Instructions
If the card does appear, then try the following ...
Reset the PRAM
o Shut down the computer.
o Turn on the computer.
o Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
o Hold the keys down until the computer restarts and you hear the startup sound for the second time.
o Release the keys.
(ref: Resetting your Mac's PRAM and NVRAM)

Using airport extreme card to connect iPhone to internet of mac ?

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?

Read here:
http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

Using a wire connected mac as wireless base-station by using airport extreme card

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?
If not, is there another way?

ok, i got the answer from another discussion. http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

Can't Connect to Internet using AirPort Extreme Card and DLink Router

Similar Messages

Maybe you are looking for