Can't connect to internet while connect with spaeker

I just bought airport express from istudio. I wanna surf the internet while connect the speaker too. how can i do
so i wanna get how to set up this one. I use dlink access point plug from dlink router

Hello yosarena. Welcome to the Apple Discussions!
In order to surf the Internet while streaming to the AirPort Express Base Station (AX), the AX needs to be configured to "Join a wireless network."
(ref: AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless > Wireless Mode = Join a wireless network)
This will allow you to connect to the D-Link's wireless network for Internet access and stream to the AX simultaneously.

Similar Messages

My iPhone 3GS is stocked on apple logo while restarting my iphone.Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..

My iPhone 3GS is stocked on apple logo while restarting my iphone. Do I need to reinstall new IOS on it?Or how can I connect with my itunes again.Thanksssss..

I having the same issue about the and iTunes says "The iPhone cannot be restored at this time because the iPhone software update server could not be contacted or is temporarily unavailable.". I've had the iPhone 3GS since it came out. It was working fine until I just tried to update it. It has never been hacked or jailbroken. We and a few others are having the same issue then it is more than likely that this is an update issue. I took mine to the Apple store and the tech tried to update it and he came to the same problem and told me he couldn't update it. My assumption is that we are not the only one's with this issue and that if there was a way to update it to the update before this last one it might be a solution. I don't know how to get the previous update. Apple probably is aware of the problem, and hasn't come up with a solution yet. Or, enough people haven't complained yet. The tech suggested that there might be something wrong with the phone itself, but that couldn't be since it was working perfectly before I updated it and others are having the same issue. It is highly unlikely that a lot of people are not having the same hardware issue all of a sudden at the same time.

Itunes can`t connect with the ipad because it is blocked with a code

the thing is the following . I bought an Ipad and they connected it to the computer without synicing it with itunes so I could use it. I used it for a while and inserted a password. After using it I turned it off and when I got home it appears " Itunes can´t connect with the ipad because it is blocked with a code. Insert the code in the ipad to use it with itunes." The point is that I can´t even use it because it says to insert the password and the ipad says that I have to connect it to itunes so no password can be inserted so I can´t use my ipad

You need to start all over from the beginning. After connecting your iPad to the computer, look in iTunes for instructions how to "Restore as new."

Itunes can not connect with the Itunes store

Every time I try to connect to the ITunes Store an error pops up : Itunes can not connect with the Itunes store. I have downloaded the updated software and have access to the internet. Anyone ever run into this problem?

If it still has problems after trying the steps above, try resetting Winsock. It looks like it worked for a few people in this thread -> With iTunes 10.4 I can access iTunes store.
MTG68 wrote - In windows 7, click on your start menu, go to accessories, right click on the command prompt icon and choose "run as administrator". Once it opens, type in the following command...
netsh winsock reset
hit enter and it should say something like winsock reset successful now reboot your computer.

HT5085 hi, i bought itunes match yesterday, and i can not connect with the server. Error 4010 appear ever time when i want to entry on Itunes match.Thanks

i bought itunes match yesterday and i can not connect with the server. Error 4010 appear every tiem when i want to entry on itunes match.
Thanks

Here are some things to try:
Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again
And, you don't need to turn off the firewall, just add itunes and itunes helper to your security software firewall.

Apple TV keeps saying it can't connect with itunes store. Help?

Been trying to pull up purchased season of Breaking Bad. Got thru some episodes but now it's saying it can't connect with itunes store. Everything's updated and all other features of ATV work fine.

I've had apple tv since August and seem to have had to do a restore every 2 weeks or so, lost connectivity, can't connect to itunes or other errors. the restore takes a good 20 minutes even on wide band internet. it works for a few days then seems to go bad. read something online tonight about just restarting apple tv, presumably by powering down from the socket and rebooting. good luck.

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too

I have an account for apple but this is not acceptable for i cloud. It say it is correct ID and password but this is not icloud account. So my phone can not connect with my computer and not synchronization too. Last a few months i have not use this phone. Just i start to use again. So most probably i gave my old mail address as a ID or password. So how can i clearing this subject. regards

ErolSinan wrote:
... there is no button for update between the About and Usage buttons in the General. ...
Correct. That is only a feature of iOS 5 or later...
ErolSinan wrote:
... yes my phone is 3G.
then it can only go as far as iOS 4.2.1

How many apple tv can I connect with one account?

how many apple tv can I connect with one account?

there are 2 recent posts that suggest issues over 5, one where someone was trying to troubleshoot for a friend or client as they couldn't keep more than 5 connected, and the other where somone had more than 5 but was using 2 separate itunes libraries to share the load - not sure if that was with the same or differing AppleIDs.
I guess there is always the possibility that things kight vary from one itunes version to the next even unintentionally to allow more.
AC

I can't connect with Turkey!

Hi! I have a problem. I'm from Poland and can't connect with my friend from Turkey using Skype. It's strange coz she is the only one from my friends with whom i can't establish connection. And she is from Turkey. I talked to people from US, South Africa and other remote countries but I can't establish connection with Turkey! And i'm from Poland. Does Turkey block connection from Poland? She has the same problem. She can't connect only with me - she talks to people from all over the world expect me. Can you help me?
Solved!
Go to Solution.

muskagap wrote:
Oh, sorry, it's Marocco not Turkey
tell your friend to connect Skype through a proxy server:
http://community.skype.com/t5/Windows/Unblock-Skype-in-Oman/m-p/905294
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

I can't connect with using connector

Hi,
I want to create a system(Solman 4.0) in Portal.I have created a SAP system using dedicated application server and then I filled all necessary fields.I tested with using system connection test.There are two test nameS(SAP Web AS Connection and Connection test for Connectors)Firstly, I checked WAS Connection and everything was ok but when I tested "Connection Test for Connectors" it didn't work.When I clicked test button, it said "Connection failed. Make sure user mapping is set correctly and all connection properties are correct" but I didn't use UIDPW.I used the Logon Ticket method and system_type is SAP_CRM but when I checked log file, it said this message "(R3/BW) Failed to get connection. Please contact your admin".I didin't understand because I have already used SAP_CRM syte sytem type.Why do I get this message. In addition, The ume.usermapping.unsecure is already on TRUE.In short, I can't connect with using connector.What's the problem?

Hi Vijith,
I perform your suggestion and I got an error message.This error message is written below.
Exception in SAP Application Integrator occured: Unable to parse template '<System.ConnectionString>'; the problem occured at position 0. Cannot process expression <System.ConnectionString> because Invalid System Attribute: System: 'SAP_LocalSystem', Attribute: 'ConnectionString'. .
There is a connection string error but I didn't use by using connection string method.I have used by using dedicated application server. At the same time, I have another error message in the dev_jrfc.trc.This error message is as fallows
Error> occured >Mon May 07 09:18:37,334< >RfcGetException rc (7) message: The system is unable to interpret the SSO ticket received
<RfcGetException
What's your comment?

Can I connect with more than one iTunes acct

Can I connect with more than one iTunes acct

Laxman25 wrote:
If its multiple apple id's on one computer you can't because you have to log out of one and login on another.
I've only got one ID so I can't test but Winston says you can be signed into iTunes with multiple AppleIDs (i.e authorise iTunes for more than one ID content) at the same time, and that even different account content will stream so long as Home Sharing ID in iTunes matches AppleTV Home Sharing ID.
AC

TNSping ok..can't connect with sqlPlus ...just stopped working

Hey Guys,
I have an Oracle Server running for the last year with little issues.
The lister just stopped working...
I can TNSPing ok...I just can't connect with toad or sqlplus anymore from another computer..
I can connect with sqlplus on the same computer...just not from any other computers.
=================================================================
C:\Documents and Settings\Phil>tnsping elvis 5
TNS Ping Utility for 32-bit Windows: Version 10.1.0.2.0 - Production on 17-JUL-2008 11:10:28
Copyright (c) 1997, 2003, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\10.1.0\Client_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=7.7.1.1)(PORT=1521))(CONNECT_DATA=(SID=orcl)))
OK (70 msec)
OK (40 msec)
OK (50 msec)
OK (50 msec)
OK (40 msec)
C:\Documents and Settings\Phil>
==================================================
Listener status info
================================================
LSNRCTL>
LSNRCTL> status
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.1.0.4.0 - Production
Start Date 17-JUL-2008 10:45:26
Uptime 0 days 0 hr. 29 min. 2 sec
Trace Level off
Security ON: Password or Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.1.0\Db_1\network\admin\listener.ora
Listener Log File D:\oracle\product\10.1.0\Db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=8080))(Presentation=HTTP)(Session=RAW))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=2100))(Presentation=FTP)(Session=RAW))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL>
LSNRCTL>
LSNRCTL>
LSNRCTL>
==================================================
Listener.ora
# listener.ora Network Configuration File: D:\oracle\product\10.1.0\Db_1\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.1.0\Db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
====================================================================
sqlnet.ora
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
====================================================================
tnsnames.ora
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = elvis)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
=============================================================================
I am getting this error from sqlnet.log
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 10.1.0.4.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.1.0.4.0 - Production
Time: 17-JUL-2008 10:23:14
Tracing not turned on.
Tns error struct:
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0

LSNRCTL>
LSNRCTL> services
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=elvis)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:18 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: ELVIS, pid: 2284>
(ADDRESS=(PROTOCOL=tcp)(HOST=elvis)(PORT=1027))
The command completed successfully
LSNRCTL>

Can I connect with Database using Session Bean

Hi,
I am new to EJB. I have small doubt.
can I connect with Database using Session Bean.
Regards,
Murali.

Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK.

After updating to Mavericks, FaceTime will say it's connecting and then fail. I can't connect with my family in the US dialling from UK. Any tips on how to fix much appreciated!

From the Mail menu bar, select
Window ▹ Connection Doctor
Click the Show Detail button. A drawer opens. Try to send a message and post the text that appears. Anonymize any personal information before posting.

How can I connect with the AspNetUsers table in MVC 5?

I have a model, in which I have used several foreign keys from other tables. The point is that I also need to get the Id of the user, from the AspNetUsers table, though, I don't know how. I have done something like this, but it doesn't seem to be working:
public class Message
public int MessageID { get; set; }
[Required(ErrorMessage="Please type a message to submit")]
[DataType(DataType.MultilineText)]
[Display(Name="Message")]
public string MessageText { get; set; }
public DateTime WrittenOn { get; set; }
[Required(ErrorMessage="Please select a ticket")]
[ForeignKey("Ticket")]
[Display(Name="Ticket")]
public int TicketID { get; set; }
public virtual Ticket Ticket { get; set; }
[Required(ErrorMessage = "Please select a business")]
[ForeignKey("Business")]
[Display(Name = "Business")]
public int BusinessID { get; set; }
public virtual Business Business { get; set; }
[Required(ErrorMessage = "Please select a user")]
[ForeignKey("aspnetusers")]
[Display(Name = "User")]
public int Id { get; set; }
public virtual ApplicationUser ApplicationUser { get; set; }
When I try to create a controller using the Entity Framework with my model, I get an error message saying:
The ForeignKeyAttribute on property 'Id' on type ... is not valid. The navigation property 'aspnetusers' was not found on the dependent type ... The Name value should be a valid navigation property name.
If someone could help me solve the problem, I would be glad.

Hi Toni,
I see that this particular query is been answered in the following thread.
http://stackoverflow.com/questions/25372436/how-can-i-connect-with-the-aspnetusers-table-in-mvc-5
You can also refer the following links, hope this helps.
http://stackoverflow.com/questions/20071282/aspnet-identity-and-mvc5
http://blogs.msdn.com/b/webdev/archive/2013/10/16/customizing-profile-information-in-asp-net-identity-in-vs-2013-templates.aspx
Regards,
Bharath

I can't log in to ichat due to the fact that I can't connect with aim.

i can't log in to ichat due to the fact that I can't connect with aim. everytime i try to log in it gives an ichat connection alert saying that the connection to the host was unexpectedly lost. the weird thing is that it let me sign on the first time then all of the sudden it just clicked off, giving me that message.
Mac OS X (10.4.8)

I'm having the same problem.
I know this is an Apple forum, but is there anywhere that we can get info about AOL's servers (i.e., which regions are having trouble, etc)? I'm in France, and AOL seems to shut down at about 6:00pm every day. This is very frustrating, since the people i'm trying to talk to are in the US.
Edit: the firewall port solution doesn't work, either. It's AOL.

Can't connect to internet while connect with spaeker

Similar Messages

Maybe you are looking for