Can't connect to Internet - window asks for username/password

Turned on my iMac today, clicked on Safari and the window opened with address bar saying it was my home page (google). However, favicon is a D in a blue star with red star bursts. The window (not a popup) asks for my Internet Service Provider username and password in order to connect to the Internet. It even gives the correct tech phone # to my ISP and their logo. I did not enter my info but called the isp and they do not know what it is. The two other computers in my house, a PC connected via wire and an iBook G4 connected via AirPort, work fine.
The iMac will not go to any other address in Safari or Firefox, though it will display the address (w. D favicon) in the address bar. Mail will not download email messages from Gmail, either. It says the connection to the server timed out. iTunes can't access the Store and says make sure your network connection is active. Everything was fine when I shut the iMac down on Monday. :0(
Page Source info (in both Safari and Firefox) lists a Javascript with the e-mail [email protected] and Web site http://redrival.com/eak
What is wrong?? It is a virus or malware or something? HELP!
iMac 10.4.11 Safari 3.2.1 connected via AirPort
Thank you for any ideas... tech support at the ISP has never seen anything like this and was zero help.

That may, of course, be a totally different problem. You might have a look in System Preferences > Network. In the Advanced section, under Airport, you can deselect any networks listed there (as well as some other useful changes). It may be that it recognised that network and somehow joined.
I would not worry about viruses on Macs, at least not yet (the future, etc.), but there IS malware like Trojans, and it is possible for people to break into a computer with some help. Make sure the Firewall is on (Security preferences) and that your passwords are strong. A lot of people -- and I am one -- think it is better to work in a User account and leave the Admin account alone, except for maintenance and installing software. That gives a bit more protection as you cannot install stuff in the User account without the Admin password -- gives you a second or so to think, at least.

Similar Messages

  • I was using firefox 5.0.1 & it was crashing frequently.I removed the installation & tried to reinstall.I getting a window asking for adminstrator password.Even after entering password,firefox was not getting installed

    I was using firefox 5.0.1 & it was crashing frequently.I removed the installation & tried to reinstall.I getting a window asking for adminstrator password.Even after entering password,firefox was not getting installed

    Sorry you are having problems. First of all try Fifrefox's safemode.
    *[[Troubleshoot Firefox issues using Safe Mode]]
    If that works post back for further advice.
    Next step, if safe mode did not work.
    <u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
    See
    * this recent post [/questions/940399#answer-377134]
    * http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    <u>Second: try a New Profile</u>
    *http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
    * this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
    **[[Back up and restore information in Firefox profiles]]
    * Until you are absolutely confident about the repercussions I suggest
    ** always use an empty folder when creating a new profile
    ** never delete or rename profiles, just disable or remove shortcuts
    ** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

  • HT5622 changed my apple ID, can't change I-cloud ID asking for old password from a deleted e-mail account can't shut off find my phone

    changed my apple ID, can't change I-cloud ID asking for old password from a deleted e-mail account can't shut off find my phone

    bdreiling wrote:
    I have this same issue and I have tried doing as you suggested but it won't let me do that withought shutting off FIND MY IPHONE- but I can't turn it off without entering my old password for an old apple id. ....so thoughts?
    You're saying this is happening on a Mac??  Find My iPhone is a feature of iOS devices, not Macs.  If you are trying to change the iCloud ID on an iOS device, you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.  When you do this you may find that the password for your old ID isn't accepted.  If this should happen, and if your old ID is an earlier version of your current ID, you need to temporarily recreate your old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • How can I turn off Keychain from asking for my password EVERY time I check for mail?

    how can I turn off Keychain from asking for my password EVERY time I check for mail?
    This is really driving me nuts.....
    Thanks

    Choose Apple menu > System Preferences, click Security & Privacy, and then click General. 
    Open the General pane of Security & Privacy preferences
    2.     Select “Require password...NEVER after sleep or screen saver begins.”  You can adjust the amount of delay before a password is required in the pop-up menu.
    From what I am aware, you cannot turn off the keychain.
    I hope this helps.
    This is also a link that might help http://macs.about.com/od/systempreferences/ss/Mac-Security-Using-The-Mac-Securit y-Preference-Pane_2.htm

  • SDK Trunk. Update my local copy has started asking for username/password

    SDK Trunk. Update my local copy has started asking for username/password
    these has been happening on and off for a few days now.
    when i click update on my local copy of the sdk ready to do my morning build I've started to be asked for a username and password. I do have a username and password for sandbox and patching etc but entering this has no effect.
    are there times of day when the trunk is locked or something like that? This is not happening all the time but it is several times a day.
    has anyone any idea why this is happening
    Ive don e all the usual things, clean my local version, grabbed a totally new version etc
    im on windows using TortoiseSVN(which is always using a current build)
    cheers
    g

    Ive had this same issue on and off across all the open source svn
    im yet to find any pattern apart from the fact that the auth error only ever shows the root of the svn request.
    Ie http://opensource.adobe.com/svn/opensource/
    Now im not sure if thats just the way the reporting ui works of if it indicates that somewhere in the update it starts to trigger the url rot and thats where the auth request gets triggered. This may be total nonsense. Just a thought.

  • A pop up window asking for my password?

    Ever since I changed the admistrators password, this stupid window keeps popping up.
    I've searched everywhere and it's driving me crazy LOL All I do is cancel it (hit the red circle)but it keeps coming back.
    any ideas?
    It says that Safari is asking for the password...

    This is in the Help section..and it isn't true. I never DID create a keychain password. And, it is NOT the same password as my login password. I've tried every password I've ever used, and NONE OF THEM WORK. This is really (oh, excuse me while I hit the cancel button twice) ARGH The only password I ever set was the adminstrator one. I used to set Screen Saver passwords on PC's with ease...the Mac password system is wayyy too complicated.
    ========================
    You start with a single keychain, which is created automatically the first time you log in to your Mac OS X user account. Your default keychain has the same password as your login password. This keychain is unlocked automatically when you log in to Mac OS X and is referred to in Keychain Access menus as the "login" keychain.
    You can create different keychains to store passwords for different purposes (for example, one for work and one for online shopping) or make a copy of a keychain so you can take it with you to other computers.
    Keychains can be accessible to just a single user or sha

  • HT204400 Apple TV will not ask for my wifi password to connect - it says it is connected but it is not- i click on my wifi and says connected but does not ask for my password

    I just hooked up my Apple TV - it is all connected correctly- when my wifi comes up on my tv screen i click and select it. It then says it is "connected" , but it is not as is it has not asked for the password for my wifi. I have turned it all off and back on, I have restarted it as well. I do know why it will not ask for my password - am I missing something?

    It will not ask after it is already connected.  Is ATV working?  Can you connect to the iTunes store, Netflix, etc?

  • I am locked out of my iPod touch and i can't restore it as it asks for my password which i don't know how do i unlock it?

    I am locked out of my iPod and it says i cannot restore or back up due to me needing to unlock it and obviously i don't have my password. Please help, how do i unlock it?

    Options for when an iOS device gets locked because of forgotten password:
    Restore (and reset password) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    If you cannot connect it to the computer to which the device was last connected you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)

  • My ipad wont connect to wifi, it asks for the password then just loads?

    i hit the thing to connect to my wifi and it will ask for my password and once i hit join it just loads. it works when im at school but once i go to connect to my house wifi it wont?

    Settings>General>Reset>Reset Network Settings. Then reboot your iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • Help please I can't get into my computer, asking for a password I do not know

    When I push the start up bottom, the screen pops up "ENTER ADMINISTRATOR PASSWORD OR POWER ON PASSWORD" I have no clue why it's doing this and the pass word it won't even let me put in a windows cd to reboot the system without a password my laptop is only 3-4years old

     When asked for the password just hit enter 3 times. Post any code. REO

  • What can I do if my computer asks for a password before booting and I don't know it?

    I have a toshoba satellite that is my sons.  I recently replaced the hard drive and now it is asking me for a password upon startup.. There is a black screen with a blue box asking for a password.  I have seen videos on how to remove but none of them apply to my model.  Any help would be aprpreciated.
    Model-L755-S5306

    If it's a power-on password set in the BIOS of the laptop, there's no way to remove it without professional servicing. If it's a hard drive password, the hard drive would need to be replaced. I'm sorry.
    - Peter

  • Router No Asking For Username/Password

    Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.
    Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.
    I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
    The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting usename and password? However, once there you can go right into the setup screens by clicking OK.
    I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or myrouter.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.
    I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
    The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
    I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.
    I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.
    I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.
    I'm not professing  to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
    Again I hope SOMEONE from Cisco sees this and investigates.
    Thanks for allowing me to "rant".
    Dave

    Thank you zee29 for the reply however, when I change the router password under administration I'm presented with a screen that says the router's password has been changed on my next Cisco Connect startup. I click OK and then I'm presented with a screen that says BOTH passwords must be the same. This is crazy. My router is not secure on my desktop. Anyone who uses my desktop and wants to "fish" around can enter my router's settings without being presented with a password prompt.
    And I'm still presented with the problem of connecting via 192.168.1.1. or myrouter.local using IE 8 in which a "page cannot be displayed" message appears. I can log in via Google Chrome however, once I enter the username and password once I'm able to access router without being prompted. The network isn't totally secure.
    I have seen other posts where these Cisco routers are having "problems" when using IE. It would seem to me that Cisco would want to rectify this situation. Its not like I'm running a beta operating system that Cisco is not aware of. I'm running an XP system that is totally updated.
    I've been running Linksys/Cisco routers for years and have never had these problems. If these "problems" continues I will have no choice but to purchase a router from another company such as Netgear and say goodbye to Cisco.
    I want and need a SECURE network.
    Dave

  • Keeps asking for username password proxy server

    When i start Firefox 8 at work, Firefox keeps asking for username and password. I have fild in the network settings to not use a proxyserver for: 150.0.*;12.0.*.
    Now the startpage of Firefox is our ourIntranet which is: http://ourintranet (which has a ip example: 150.0.2.3
    So what i want to do is: use proxy except for this ip: xxxxxxxx, because this ip is http:\\ourintranet
    Now i cannot go to http:\\ourintranet because he keeps asking for password.

    I'm not sure why it's not working. I think Firefox looks in the hosts file and then the configured/automatic DNS server for address resolution, in that order. To specify otherwise (for eg. a proxy for address resolution) the [http://kb.mozillazine.org/Network.proxy.socks_remote_dns network.proxy.socks_remote_dns] in [http://kb.mozillazine.org/About:config about:config] has to be set to true.
    You can also check in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. A new profile would have the default settings and wouldn't usually have any installed extensions and would be clean. You can try then try the proxy settings.
    The 150.0.2.0/24 should work (24 bits for the network with 254 addresses - http://www.subnet-calculator.com/cidr.php) unless perhaps the network is super-netted in which case you can also try the supernet prefix instead of /24.

  • I had to remove and reistall Firefox after it would not open. When I try to install Windows asks for a password for me to download? How do I get around this?

    I downloaded Axis from Yahoo. The next day Firefox would not open at all. I removed and tried to reinstall. Now whenever I try to reinstall Firefox, windows asks me to enter a password before I can install. How do I get around this?

    Yes, sometimes the problem can happen before the window is able to show up.
    As for the administrator password I'll double check if that's normal or also a symptom, but helping you with the password is not our area of expertise, you'd need to get support from Microsoft. Do you know if your account is admin or limited? You can try putting your credentials in.

  • Opening an email with a window asking for a password

    I am in mac mail on my eMac trying to view an email from Realsimple.com that I viewed earlier today and I keep getting a request for "To view this page, you need to log in on area "Staging Area" on cp.realsimple.com. Your password will be sent in the clear." Then it asks for a name and password. I don't have an account with this website, but I have gotten daily emails from them for some time and have never gotten this prompt before. I can't get out of it to view any other emails either.

    I have tried your suggestion too. I can not seem to get the program from stopping to bring up the password drop down window.
    This window says: "To view this page, you need to log in to area “Staging Area” on cp.realsimple.com."
    Concerning "preview" I don't know what that is - tried clicking on all corners but got no response because drop down window is locking out of "mail" program. The main screen has folders on left, unopened mail lists on top right and the highlighted mail in window frame below.
    What actions are you suggesting that I take to get out of the locked program?

Maybe you are looking for

  • How do you invoke a simple jsp

    hi, i have a very simple jsp that displays the current time. it works on my tomcat server (installed on my computer). i purchased a domain from yahoo, say, www.beginer.com and uploaded the jsp file to the yahoo server. but when i referenced it with t

  • Radio Buttons w/ Multiple Values on a PHP Form

    Hi, I have an Online Registration form with several options that each have their own prices.  I want the form results to show the name of each option the user selects, and the total of all the prices combined.  My question is how can I do that when e

  • I want to set up a desktop ikon for a webpage. Can you help?

    Here is the webpage: http://onlineministries.creighton.edu/CollatorativeMinistry/daily.html I want to create an ikon on my desktop to use daily. I was given directions for Explorer, but I use Firefox, and the directions did not work. How do I do this

  • How to deal with Join Table in SAP Query

    Hi buddy, I create a Infoset ZTest by some infotype, one of them is 0185, and 3208. In 0185 there is a ICTYP and 3208 also SUBTY, and they are Join by that fields. It means, add a new record in P0185 with ICTYP = 'RS', there is a new record add in P3

  • How do I remove Aperture trial and go back to iPhoto (be kind, I'm new).

    How do I remove the Aperture trial and go back to iPhoto.  For my usage (just iPhone pics/movies) iPhoto is okay for me, but now I cannot figure out how to remove Aperture, when I drag to Trash I get a warning that Aperture is a system file. Please h