Can't connect to internet with itunes but am using Internet on machine

itunes is telling me that i have to check my internet connectivity however im on the internet just fine. Please help. i tried to upgrade itunes, uninstall itunes, and still nothing.

Hello okiska. Welcome to the Apple Discussions!
under system preferences is says "airport is connected to the network", and Airport utility says "your apple wireless device does not have a valid IP address".
What these are telling you is that your MacBook Pro is connecting to the AirPort Extreme Base Station (AEBS), but the AEBS is not "communicating" with the modem.
I suggest a complete power recycle of your network components to get things working again.
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AEBS, & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

Similar Messages

  • How can I connect a PC with iTunes to an ipod and make iTunes play podcasts directly from the ipod without synching with iTunes on the PC ?

    I predominently use my ipod to listen to my favourite podcasts. I download podcasts onto my Home PC using iTunes and then synch the podcasts onto my ipod again using iTunes. This all works fine.
    Occassionally I want to connect my ipod to my Work PC via iTunes and listen to the podcasts by playing them through my Work PC external speakers. I DO NOT want iTunes to synch with my ipod, I just want to access the podcasts on the ipod and play them directly using the iTunes on my Work PC. I used to be able to do this, but have recently had a new replacement PC provided and now when I attach my ipod to the new PC iTunes wants to synchronize, and I can't see the podcasts which I know are on the ipod.
    I'm sure that this is an easy one for you experts out there. Any help appreciated. Thanks. Arnold

    Just to be clear - I have a new Work PC. My Home PC and ipod synching is all still working fine - it's just connecting the ipod to my new Work PC - and not being able to see and play the podcasts from the ipod - which is the problem that I am trying to overcome. Thx.

  • Help !! I can´t connect my ipod with itunes !

    I ant coonect my ipod to itunes ! i even cant see that my usb thing is connected to my computer !
    it began..when a friend wanetd to send me a song ! from itunes original! so he gane me his password so i can listen to it ! n after that i couldnt enter with my ipod anymore !!!
    HELP PLEASE !!
    n i´m sorry for my english..
    windows xp   Windows XP  

    Have you looked at the troubleshooting document? iPod missing in My Computer and in iTunes

  • Can't connect to server with Automator, but can with Command-K

    I'm trying to set up an Automater script in OS X 10.5.1 that will force a connect to all my afp and smb servers on the local network. All the servers connect fine except one. it's url is smb://192.168.1.30/shared%20files.
    If I use Command-K and type that in, no problem, loads right up. If I use that url in an automater script it gives the error message "A volume failed to mount. The volume "shared files" could not be mounted."
    This volume is on a NAS, and another volume on the same NAS opens just fine.
    Any ideas why this would happen?
    I've also tried to url smb://192.168.1.30;name@wd-netcenter/shared%20files to no avail. That url also works with Command-K

    LOL. I'd actually thought of that, but didn't bother trying! Sure enough, that was the problem. Thanks for the suggestion.
    For those who might follow this in the future, it's just
    networkaddress/shared files
    not /"shared files"
    or /shared%20files
    I don't like the inconsistency in OS X over this. In Terminal I need the quotes to handle a space, in Finder I need the url %20, and in Automator it's just type as displayed. I guess I'll file a bug report and see if they ever fix it.

  • I wanted to install IOS 7 on my Ipad 2, but I got a sign that I have to connect my Ipad with Itunes, but that doesn't work

    I wanted to install IOS 7 on my Ipad 2 wireless, but then it restarted and when it went on, it showed this picture:
    It doesn't work and now I can't use my Ipad, please help me!

    Wait a bit and try again. Tons of people are all trying to get the update at once so the servers are swamped.

  • How can I connect to my wifi router, but still use my cellular data?

    I have setup a (off the internet) router at work to allow other Iphone users to connect with each other, as well as use the Apple TV. My Iphone 4S tries to use the wifi for email, web browsing, youtube, Netflix, etc...  I would like to use my cellular data to load Netflix and such, and then stream them over my local wifi to the Apple TV.  Is there a setting I can change that will allow me to do this?   Thank you.

    Nope. You connect to either WiFi or the cellular data network, not both at the same time.

  • Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.

    Hi everyone, I was wondering if someone can help me.  I recently got my first ever Ipod.  It's the new Ipod Nano 7th Generation.  I have tried to synchronise it with Itunes but it says "Connected, Eject before Disconnecting" but nothing happens.  I have tried uninstalling & re-installing Itunes but this didnt help. 
    Does anyone have any ideas? 
    Thanks for your help.

    I think the problem is that the iPod got set to Manually manage music and videos.  It needs to be set up for automatic syncing again.  Just unchecking that Manually manage music and videos setting does not do it.
    In iTunes 12, select the iPod in iTunes (using the device button), so that you see the iPod's "management" screen.  In the sidebar (along left side of screen), there are two headings (Settings and On My Device).  Under Settings, click on Music.  To the right, you see the iPod's Music screen, where you tell iTunes how to sync songs to the iPod.
    Check the box at the top for Sync Music.  That turns ON automatic syncing for music.  Below that, choose the option to sync Entire music library (assuming your music library fits completely on your iPod).  Otherwise, you can choose the option to sync Selected playlists, artists, albums, and genres and make your selections below.  Then click Apply.

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

    itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201263 Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Hi, I forgot the password  of my iphone4s I tried more than ten times and it lock me out with a message to connect  the iPhone with itunes on the screen but the itunes doesn't  recognise it. What can I do?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iOS- Forgotten passcode or device disabled after entering wrong passcode
    3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    4. iOS- Understanding passcodes
    5. What to Do If You've Forgotten Your iPhone's Passcode
    6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    7. Restoring iPod touch after forgotten passcode
    8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
    Forgotten Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
        If this method does not work, then you will need to fully Restore your
        device as New
    Also, see iTunes- Restoring iOS software.

  • Just got new ipad2 and can't connect to internet...recognizes wifi network but won't connect

    just got a new ipad2...recognizes wifi network at home, but can't connect to internet...help???

    I just had a similar problem.  Both the ipad 1 and ipad 2 in my household quit connecting to the network even though it seemed to recognize it.  if you think it is recognizing your network, just not connecting, check to see if bluetooth is turned on.  i had to turn bluetooth off and then manually enter the DNS number. 
    My solution also came after I re-started my network and reset all the settings on the ipad2.  The DNS number then showed along with IP submet Mask and router.  I used that dns number to enter into ipad1 after turning bluetooth off on it.
    Totally unscientific fix that may have been more coincidental than correct but you might try it.  BTW--no idea how bluetooth even got turned on to begin with.

  • IPhone 5 and 5c can't connect to Internet every 1 or 2 days with iOS 8.0.2

    After having upgraded my iPhone 5 and my wife's iPhone 5c to iOS 8.0.2, they both can't connect to Internet every 1 or 2 days.
    They can't connect via wifi neither via 3G.
    If I restart the devices they start to connect again.
    I tried to reset the network settings and also to restore the devices from scratch via iTunes like the Apple support suggested me,  but the issue still persists.
    I'm very frustrated also because I bought to my wife an iPhone telling her she wouldn't have had all the issues she used to have on a previous Samsung smartphone...
    Anyone has having the same issue?

    After the update, try resetting your cellular network settings on the phone. Make sure the airplane setting is correct and try shutting it on and off to see if that works.
    See if that helps.
    Good Luck!

  • My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • How can i connect the mac with internet key?

    how can i connect the mac with internet key?
    I try but it tolds me that I haven't the javaruntime...

    I try, but to run javapreferences computer told me that I must have a Java runtime... thankyou

  • I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station??

    I have mobile internet at the moment via a USB stick in my laptop. Can I connect my Timecapsule with a cable to this laptop and make it into a wifi station so that I can use my iPad?
    THanks for your help!

    for #1
    Frequently asked questions about Apple ID - Apple Support
    I have multiple Apple IDs. Is there a way for me to merge them into a single Apple ID?
    Apple IDs cannot be merged. You should use your preferred Apple ID from now on, but you can still access your purchased items such as music, movies, or software using your other Apple IDs.
    If you are wondering how using multiple Apple IDs relate to iCloud, see Apple IDs and iCloud.
    for #2
    Apple does not accept unsolicited ideas see Apple - Legal - Unsolicited Idea Submission Policy

Maybe you are looking for

  • Calling a Web Service from PL/SQL Procedure

    How can you call a web service from a pl/sql package , also is it valid to call a web service from pl/sql according to Fusion Standards..

  • Audigy Platinum Ex Line In Quest

    I recently re-installed my Soundblaster Audigy Platinum Ex card on a new hard dri've - it's worked properly in the past. I have run the installation cd and gone to the Soundblaster website for all the latest drivers. On my external module I am unable

  • Faulty Lenovo ThinkVision 19 inches monitor -L194WD. Half of the is screen fuzzy

    We have five faulty Lenovo ThinkVision 19 inches monitor -L194WD.  Quota of upper part of the monitor is washed-out  or fuzzy and three quotas of the lower part of the monitor appear to be OK. Any idea, advice or solution will be extremely appreciate

  • BO performance issues on OLAP Universes

    Hi All I am working on BO XI 3.0 and installed the SAP Integration Kit for Windows 3.0 version. I have built OLAP Universe based on BW cubes and reporting on the Universes using Web Intelligence. I am facing performance issue when trying to query on

  • The BLUE Default Theme That Came With The N73 & N8...

    Morning everybody? I've had a few Nseries handsets such as the N70,N73 and the N80 and now i have the N95 i'm really missing the Nokia theme (Blue with the blue circles,square clock with white hands) as it's been replaced with the Turquoise theme whi