Can't connect to internet with new wireless n "Extreme" modem

I've had a D-Link DI-604 router for about 4 years-- and wanted to go wireless with an Apple Extreme but first have borrowed my neighbor's D-Link DIR-635 to just see if this will work in my brick house etc. (3 stories, lots of cement and brick...)
Well I get as far as the 192.168.0.1 and then "clone" my MAC address (nothing to do with a Macintosh that...). Note: I was using the same computer to connect to the internet as I previously had used with the D-Link DI-604.
I also give a manual (easy-to-remember) 5-letter password to my wireless connection--
But although this "reboots" the modem, it does NOT let me connect to the internet...
So I'm back to my D-Link 604 cable (wired) only...
One thing the set-up asked for is my HOST name. The only thing I see in the Network System Preferences is an ethernet number: 00:16:cb:cd:6c:3e but I don't find a "HOST" name-- and is that really needed? (In Belgium I'm using an ISP provider "VOO")
Any comments really appreciated-- I could actually see a fairly strong signal from the wireless router (I named it "SteveHermee" and I could see strong bands even from the top floor, with router in the basement...)-- but I could never connect to the internet via CABLE (wired) or wireless.
Thanks,
Steve
Friday 14 March 2008

I got other info from others and D-Link directly.

Similar Messages

Vista laptop can't connect to internet with new time capsule

My old Vista laptopt see's the time capule, but will not make connection to the internet. My new Air works great, along with the Wii. The Vista laptop did work on a couple of other wireless routers. Any idea's?

Hi,
If ur laptop has an built wireless adapter i will suggest that dnt install the adapter which came with the linksys !
Network Security Administrator (EC Council)
linksysfirmwares.googlepages.com/

Laptop can't connect to Internet with new WRT600N

I just purchased the WRT600N wireless router and companion wireless adapter card for my laptop. The laptop already has a built-in wireless card. I am able to connect to the Internet when the laptop is wired to the router but can only seem to connect occasionally via the wireless connection. Do I need to disable the built-in wireless card on the laptop...could that be causing problems? Any other ideas why this is happening? I have read a few things online about not using the Easylink Advisor to connect which is what I was doing.

Hi,
If ur laptop has an built wireless adapter i will suggest that dnt install the adapter which came with the linksys !
Network Security Administrator (EC Council)
linksysfirmwares.googlepages.com/

Can't connect to Internet with new W520

I have a new ThinkPad W520 (4270). My ISP is RoadRunner from Time Warner Cable. The modem is Ubee U10C018. I am trying to make a direct wired connection using the USB option. I installed the drivers from the supplied disc, the message says they're installed, but the Device Manager says the USB Cable Modem has no installed drivers. I tried downloading the driver from the UbeeInteractive web site onto a flash drive using my old computer, which works fine with the aforementioned modem (and which I'm using now to post). I then reinstalled the driver from the flash drive onto the W520. Again, the message said the driver had been successfully installed, but the Device Manager says the modem has no installed driver (and "Update Driver" is greyed out). I spent two hours troubleshooting on the phone with TWC, who then said it wasn't their problem.
Help, anyone? Thanks for listening.
Solved!
Go to Solution.

Hi SSDee,
I wanted to use the USB connection for a couple of reasons: 1) No Ethernet cable was supplied with the modem, and 2) I have the modem connected to a USB hub and want to be able to quickly switch between two different laptops using the one USB cable to the hub, which also has a printer and a mouse receiver attached. (I did try connecting the modem directly to the new laptop without the hub just in case there was a problem with the hub, but that didn't work, either. It seems clear that this is a driver issue, since everything works fine on the older laptop.)
I am frustrated that no 64-bit drivers seem to be available, and the old drivers say they've been installed, but Device Manager begs to differ...
However, I think at this point I will obtain an Ethernet cable and try it.
Thanks for the response.

Curve 8520 can't connect to internet with new provider

I bought an 8520 in Egypt a few weeks ago and used all internet services successfully with a provider there (Mobinil).
I had the PIN freed by Mobinil so I could register it with O2 in the UK, but I'm unable to access internet services although I'm on the correct data plan and my PIN is free to register. The handset works fine for calls and SMS via O2.
O2 say there is nothing they can do as it's not their handset -- does anybody have any ideas? Thanks!

under Options go to Advanced Options, select TCP/IP and punch in blakcberry.net on your APN, leave the username and password unmarked. Then restart your phone. you will be good to go
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

Having trouble accessing internet with new wireless WRT54...

Having trouble accessing internet with new wireless WRT54G. Used easylink to read existing router BEFSR41 which works great to westell modem provided by Verizon. When connect new router Easylink configures WRT54G but when trying to connect to internet...fails. All lites indicate good. Not using wireless device yet, just the wired ethernet. Router set up as DHCP.
I keep going back to old router and works great every time. Help!

Thanks for response, however I tried setting unit to 192.168.2.1 (leaving DHCP) to no avail. I put my old unit (BEFSR41) back in and I'm back up. I need to sit back and decide which way to go on this. Perhaps it's defective and I should return it.

HT5304 Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Rei installed software and now can't connect to Internet with cable or wifi ! can see network and router,. Help

Hi Guys, I'm running snow leopard 10.6.3 recently had update which left me with a DMSL launch problem. Re installed software and now can't connect to Internet with cable or wifi ! can see network and router. Have tried many things and now pulling my hair out !

recently had update
Care to share which update?
Have tried many things
Care to share?
Please detail ALL you have done so far in the way of troubleshooting? Need this info to avoid the been there done that scenarios.

How can i connect iphone 5 with izon wireless camera?

Hi
How can i connect Iphone 5 with izon wireless camera.I have tryed everything.I try to restart this camera,but iphone can not find this izon.
What is wrong??????????

I would check if they have some info here
http://steminnovation.com/support
and then I would test it with other phones or a computer to verify that it's not broken

Unable to connect to internet with my wireless router...... Shows Connected... Great signal...

Hello, I really need some help.�
�
I have Verizon DSL and that works great when it is connected to my laptop with a network cable.�
�
I got a have a linksys wireless router (wrt54G)� � and It works, � according to the network connections........ Connected and says the signal is great.
�
� However when I an connected to my signal and I open up a browser window .... it says it cant find network....
�
� I have reset the router...... and the Verizon modem....... 3 or four times........ I even went with the linksys step by step software CD twice.� Nothing.....� I can, however connect to my roommates wireless network, just fine.... but he is moving and taking his router with him so I need to get mine to work.
�
I am new at the wireless networking thing so any hepl in laymans terms would be greatly appreciated.... thank you
�
Melissa

Ok......... finally fixed it. seemingly, all that i needed to do was change my ip to 192.168.2.1. WOW then it worked.

I can connect to network, but can't connect to internet with aebs

so i got a new Airport Extreme Base Station, hoping to replace my old og airport. i can connect to the new AEBS network easily, but i can't connect to the internet. with the old airport, i can connect to the internet no problem, hence i can write this post. "internet connect" tells me:
+old, space ship looking airport:+
connected to "myNetwork"
connected to the internet via ethernet
+new and improved AEBS:+
Connected to "myNetwork"
but that's it. any ideas would be greatly appreciated. oh also, it seems to be running pretty hot. is that normal? thanks!

Hello mookyee. Welcome to the Apple Discussions!
It's always a good idea to power recycle all of your network components when changing configurations ...
Try the following, in order, checking for Internet access after each step, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, 802.11n AirPort Extreme Base Station (AEBSn), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBSn, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBSn; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

I can't acces the internet with (new!) iPhone 4s :(

I bought my iPhone 4s yesterday. I have Wi-Fi conection, but can't acces the internet at my house. My boyfriend can do it with his phone, works fine. I can also acces internet with my macbook. I already changed the wifi settings on my iphone, and reboot, but didn't work who can help me? Maybe it's the router?

That's a possibiliy.
If the router is set to just accept certain MAC-addresses, it might block your iPhone. But in that case, it should not prompt you for the password, it should just refuse connection. Might depend on the type of router, though...
If you log in to the routers admin settings, you can usually enable logging. That can help you to see if the router itself logs that the iPhone is connected or if any error messages pops up on the router side.

I can't connect to Internet with WIFI

Hi !
First, sorry for my so bad english but I'm French ;-)
I'm so desperate !
I have a Blackberry Curve 8520. I bought it on july. It worked very well, but since 3 months ago, i can't connect the BB to internet (with Wi-Fi or WAP).
I tryed many Wi-Fi, i tryed all the options and now i'm so desperate... Nothing works for me.
Can someone help me please?
Solved!
Go to Solution.

You can try this im also using Curve 9300 3G version 6 o.s
1.Turn Off / Uncheck your Mobile Network
2. Enable Wi-fi if theres a WEP just put in it.
3. Data Service should be ON - can be found on Mobile Network Options
4. Browse - Browser, Social apps etc
Hope helps
I guess if it is in WI-FI mode we can't call / receive Calls or Text on your network, seems strange in BB.

Satellite C655D-S5533 can't connect to internet through ethernet (wireless connection ok)

I can't get an ethernet connection thru my ISP's (Comcast) internet cable box. I clicked the LAN icon on control panel but still can't connect.

First, reboot the Comcast box and then reboot the computer. If it still doesn't work, look in Device Manager under Network Adapters. If the LAN adapter shown there is Atheros, reinstall using THIS driver. If it says something else, post back. I'm assuming you are still using Windows 7 64 bit that came with the machine.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Airport is on and working, but can't connect to internet with MacBook

I have a green light on my airport Extreme, my laptop can join my network fine and get 4 bars of connectivity.
But I cannot get on the internet with my laptop. Websites don't work.
What am I doing wrong?

Were you able to copy the DNS addresses to the MacBook? Were you able to delete the incorrect ones? Did you restart the MacBook before trying to access the Internet again?
How about the IP address for the MacBook? It should be in the address range of 10.0.1.2 - 10.0.1.200. Is it? Of course I'm assuming that you did not change the default DHCP range of your AEBSn. Your iMac should also be assigned an IP in this range.

Can't connect the internet with LAN wire in Window 7

I connect LAN wire with Thunderbolt to Gigabit Ethernet Adapter in Window7

It is common practice to post your solutions for the benefit of others who may be having the same issue.

Can't connect to internet with new wireless n "Extreme" modem

Similar Messages

Maybe you are looking for