Can't connect to ISP Server

Hi ... Don't know why now I can't connect to my ISP . I didn't do anything at all to change my setting on my ipod touch or my computer but for some reason now I am not able to connect . I was before but not now . So now what to do ? Thanks

Thanks for your respond . I gave it a try and still didn't work . Here the thing I been messing around with the setting just to be sure I enter everything right I could of change a setting that I shouldn't of , now I'm not sure if everything is correct . Where is the guide or steps I can follow to be sure my setting are correct . I'm using cable connection . I know my pop and smtp are correct but I'm not sure as to whether the other areas are . I mean if this or that should be check .

Similar Messages

  • Mail can't connect to isp server. provider says it's an internal issue

    mail can't connect to isp server. provider says it's an internal issue, mail is set up corectly.

    Are connecting exclusively through IMAP or through POP?   IMAP automatically stores all the e-mails on the server.
    POP gets them onto your Mac.   The advantage of IMAP, unless you desire, you are not downloading all the attachments to your hard drive, and bandwidth issues of downloading slowing you down with lots of large attachments are avoided.   The other advantage with IMAP, you can try a web based e-mail to see if your e-mail program missed downloading everything.    http://www.mail2web.com/ is my favorite web based e-mail.  I recommend at least trying it to see if it will let you see your e-mail.  Any custom folders will be invisible, but at least anything in your inbox should be visible and usable.
    Are you using any other e-mail software for forwarding, such as gmail?

  • Pap2t - Can't connect to login server

    Hello,
    I bought a linksys pap2t unlocked version in india. I have been trying to setup gizmo project using the instruction given by gizmoproject but I always get the below error message:
    Display Name: User ID: 17471730102
    Hook State: On Registration State: Can't connect to login server
    Last Registration At: 0/0/0 00:00:00 Next Registration In: 24 s
    Message Waiting: No Call Back Active: No
    Also
    SIP Messages Sent: 96 SIP Bytes Sent: 38408
    SIP Messages Recv: 0 SIP Bytes Recv: 0
    External IP: 59.92.61.69
    My DNS configuration (as listed in the configuration page)
    DHCP: Disabled Current IP: 192.168.1.2
      Host Name: LinksysPAP Domain: 
      Current Netmask: 255.255.255.0 Current Gateway: 192.168.1.1
      Primary DNS: 192.168.1.1  
      Secondary DNS: 61.1.96.71 
    The primary DNS is my router and the secondary is that of my ISP. I have also tried specifying no DNS. The network configuration at my place is PAP2T -> Wirless Router (Netgear) -> ADSL Modem -> Internet.
    The SIP message received and SIP bytes received are always at zero. On my router (Netgear WGR614v7) i have tried setting up port forwarding:
    # Service Name Start Port End Port Server IP Address
    2 Gizmo 5060 5060 192.168.1.2
    3 stun 3478 3478 192.168.1.2
    I have tried with both NAT on/off. I am at my wit's end!! Please help me out. Please do let me know if you need any further data on my configuration..
    Please Please help me out - quite frustrated now after two days of tinkering with the configuration pages. I have also tried with voipstunt.com account - same problems persist - i think it is more of a network issue than that of the voip service provider.
    Thanks a lot
    Ashwin

    I have had exactly the same problem with a PAP2NA, the solution for me was to reset and configure both lines the same, i.e. configure line one and line two with the setup given by your Voip provider. Hope this help
    golfgolfo

  • How can I connect to SQL Server CE?

    Hi!
    How can I connect to SQL Server CE ?
    Any idea?
    I found jdbc driver for SQL Server 6.5,7.0,2000.
    But no driver for SQL CE.
    Thanks for any suggestion....

    I am also searching for same answer.
    I wanna choose Access as a db. but I can't find that so I have a no choice to select SQL2000CE though.
    I am stuck in driver problem. I can't find that.
    Should I use Oracle Lite or PointBase?
    I am under a lot of stress... like you've been...
    I wish you find and post that....

  • TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • Remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed

    remote desktop connection manager on windows 8.1, can't connect to windows server 2012 R2, Socket closed each time i try to open remote connection to the server,
    does remote desktop connection manager V2.2 not compatible with windows 8.1, and if so, is there are any other compatible versions
    or what's the problem,
    Mahmoud Sabry IT System Engineer

    this issue maybe will be fix by latest version, we still waiting for it
    maybe your issue can be fix using this methods
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/61f218a5-5ef8-49da-a035-90cdd64fc9a0/problem-with-remote-desktop-connection-manager-error-3334?forum=winserverTS
    http://shawn.meunier.com/?p=1#comment-43

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

    Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
    error showing up, there is no auth-master file in /var/run/dovecot
    this has just happnened over night
    any ideas how to re-install dovecot
    google search goes on about linux but barely any info about max osx server

    auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

  • Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

    Dear Fellas:
    I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
    mysql info:
    ps -ef | grep mysql
        0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
       74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
      501   952   947   0  3:52PM ttys000    0:00.00 grep mysql
    Please help!!

    Fascinated and guessing:
    Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
    I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
    Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
    Just speculating.

  • My ipod touch connects to wifi but can't connect to the server.

    Ok, so my ipod youch says it's connected to the wifi but when i try to get on the internet it says it can't connect to the server. I've looked and there's alot of answers but they're all soooooooooooooo complicated. I'm like 14, so whoever can answer this, please use small words.
    I've noticed in alot of the answers they talk about your IP adress, if it's any consilation mine starts with 169. No matter where I go, if it's at home, or at starbucks or a hotel.
    Thanks for your time

    Have you tried restoring your iPod touch in iTunes?
    You may just be trying to connect to "Printer Networks" that allow a company/residence to print something from their printer wirelessly, it would appear on your iPod touch just about the same as any other network, but you wouldn't be able to use internet while connected to that network...
    If you are talking about "free wifi" in a Cafe, like Starbucks, you will usually need to open Safari. A Page will load and tell you how to connect to their internet, whether it's by paying, or just agreeing to their terms...
    Like, I said, if that isn't the problem, try restoring your iPod touch in iTunes...
    -Messymeese
    Über Enbonpoint Pangolins FTW!

  • Lync 2010 Mobile client can't connect to the server. it may be busy or temporarily unavailable

    I have the following issue after renewed the Lync internal and external certificates, Lync Mobile client get the following message when try to connect from internal or external network "can't connect to the server. it may be busy or temporarily
    unavailable"
    PS I tried a lot of solutions from different articles, but the same result. 
    presented below my environment: 
    Two Lync 2010 frontend servers with one pool.
    Two edges server.
    HW load balancer.
    Log from Lync connectivity analyzer.
    User Name: [email protected]
    Logging test parameters:
    SIP Uri: [email protected]
    Discovery Type: Automatic Discovery
    Network access: NetworkAccessExternal
    Selected client: ApplicationLyncMobile2010
    Starting Lync server autodiscovery
    Please wait; this test may take several minutes to complete...
    Starting automatic discovery for secure (HTTPS) internal channel
    Sending HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured internal channel against
    https://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for unsecure (HTTP) internal channel
    Sending HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscoverinternal.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to
    connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscoverinternal.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured internal channel against
    http://lyncdiscoverinternal.xxx.com/
    Starting automatic discovery for secure (HTTPS) external channel
    Sending HTTP request to
    https://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    https://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting, try using a browser to open the server discovery URL
    https://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:443
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for secured external channel against
    https://lyncdiscover.xxx.com/
    Starting automatic discovery for unsecure (HTTP) external channel
    Sending HTTP request to
    http://lyncdiscover.xxx.com/[email protected]
    Exception encountered while sending an HTTP request to
    http://lyncdiscover.xxx.com/[email protected]: An error occurred while sending the request.. Complete Exception: \r\nSystem.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect
    to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    An error occurred while sending the request.
    Unable to connect to the remote server
    An attempt was made to access a socket in a way forbidden by its access permissions 192.168.89.25:80
    For troubleshooting, try using a browser to open the server discovery URL
    http://lyncdiscover.xxx.com/[email protected]
    System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made to access a socket in a way forbidden
    by its access permissions 192.168.89.25:80
       at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
       at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception)
       --- End of inner exception stack trace ---
       at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
       at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
       --- End of inner exception stack trace ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendHttpRequest>d__9.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<SendRequest>d__d.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter`1.GetResult()
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<TryNextUrl>d__3.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.LyncServer.WebServices.AutoDiscoverManager.<StartDiscoveryJourney>d__0.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at LyncConnectivityAnalyzerCore.Utilities.<RetrieveUserLocation>d__3e.MoveNext()
    Server discovery failed for unsecured external channel against
    http://lyncdiscover.xxx.com/
    None, AutoInternalSecureD, AutoInternalUnsecureD, AutoExternalSecureD, AutoExternalUnsecureD, ManualDNSFail, ManualSecureD, ManualUnsecureD, AuthBrokerInternalLMXCheckGET, AuthBrokerInternalLMXCheckPOST, AuthBrokerExternalLMXCheckGET, AuthBrokerExternalLMXCheckPOST,
    MobilityMCXInternalLMXCheckGET, MobilityMCXInternalLMXCheckPOST, MobilityMCXExternalLMXCheckGET, MobilityMCXExternalLMXCheckPOST, LMXSIPServerInternalDNS, LMXSIPServerExternalDNS, MobilityUCWAInternalCheckPOST, MobilityUCWAExternalCheckPOST
    Automatic discovery of the Lync server failed. Please verify the server requirements at
    http://go.microsoft.com/fwlink/?LinkId=278998 . Lync mobile apps do not require automatic discovery. You could enter the server FQDN manually and test connectivity again.
    Microsoft Lync Connectivity Analyzer cannot analyze deployment readiness until a discovery test has completed successfully.

    Hi 
    Is that Port 443 opened? check the fire wall.
    is that external Lync clients are logging in with out any issues.
    by seeing the Log it is unable to connect on port 443
    Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An attempt was made
    to access a socket in a way forbidden by its access permissions 192.168.89.25:443
    For troubleshooting the Mobility issues follows this
    http://blogs.technet.com/b/nexthop/archive/2012/02/21/troubleshooting-external-lync-mobility-connectivity-issues-step-by-step.aspx
    Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

  • Safari Not Loading Web Pages (Safari can't connect to the server)

    I'm seeing increasing problems with Safari being unable to connect to websites. When the problem starts to manifest itself you see the error:
    Safari can't connect to the server.
    Safari can't open the page.
    Then you see the URL information. It is always seems to be sites that are trying to load HTTPS pages.
    Clearing the cache and resetting Safari will make it go away temporarily, but it always comes back.
    Note that when this happens you might happen to see something like this in the address bar:
    file:///Applications/Safari.app/Contents/Resources/

    I'm having the same problem, I can open safari but when I try to go to a website it just says "server stopped responding." I just updated to the new version and that's when it started happening, it was working find before the update. Any suggestions???

  • *URGENT* How can i get a website to load instead of saying "Can't connect to the server"

    My computer is not loading a website. This is urgent for university work!! My computer keeps saying: "Can't connect to the server" no matter what internet browser i use, and other people with Mac's can use it fine! I need it for university work. PLEASE HELP ME!!

    Power off the router. Unplug it from the wall. Wait few minutes.
    Plug it back in. Power on the router.
    Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US
    Deselect Proxies if selected.
    Safari > Preferences > Advanced > Proxies:
    Click "Change  Settings" button
    The network preferences window for Proxies will will show up with "Proxies"
    tab selected.
    Under "Select Protocol", uncheck any box if selected.
    Click "OK", then  "Apply"

  • Apple Tv is telling me it can not connect to the server. How do I fix that?

    I changed my apple id and after I did, now my apple tv says it can not connect to the server when I try to view my purchases. Hulu and netflix work so the internet is working fine.  My phone and ipad also work fine with the new id.  Does anyone know how to make my apple tv purchases come back?

    Power cycle the router and the ATV.
    If the issue continues on the ATV go to Settings > General > Reset

  • Hello.....after updating to Yosemite, i can't get my exchange mail to work.  It keeps saying can't connect to exchange server and asks for my password.  My mail is still working fine on android phone and ipad2.  Can someone help?

    Hello....after updating to Yosemite my mail isn't working .  Keeps saying can't connect to exchange server and asking for password

    I am having this exact same problem with my gmail account. Hopefully someone will have a remedy.

Maybe you are looking for

  • App Volumes 2.7 Writable Volumes - Behavior in Windows 8.1

    Hello, I've been evaluating App Volumes 2.7 on a Windows 8.1 VDI environment, seeing that the release notes now indicate that the agent installed in Windows 8.1 is now supported. The AppStack works great with Windows 8.1 desktops, but I'm having issu

  • Validation in SAP PI 7.3

    Hi, I am using SAP PI 7.3. I can see in PI Message Monitor Log that many source payload does not contain any data e.g. Header and trailer portion is present in the source payload. No detail section is there. And I can see all these messages are in de

  • MCS 7845 Raid Boot Option

    Hello, I have MCS-7845-I3 on which I have configured RAID 1 after CTRL+H option. Once done wite the RAID configuration we installed windows 2003 server which also got installed succesfully. But when I reboot the system after OS installation then it f

  • GL Migration from Classic GL to New GL using ABAP code

    Dear Experts,                     In this scenario, I am trying to develop ABAP Program which will Transfer Documents from GLT0 to FAGL* Table, i want to take opinion about Is it feasible to update Database Table using ABAP Query(Using INSERT, UPDATE

  • List view for folders on a sparse image disk

    I have set up a sparse image on an external disk.  I cannot get the sparse image disk folders to default to "List View".  It always opens as "Icons" and I have to click on list view everytime.  Any ideas?