Can't connect to my home network

Ever since I switched to BT I've never been able to access my home network via wifi but I can connect to btwifi with fon on my laptop.
It's never been much of an issue before but now I've started using my laptop more I would prefer to use my home network which is secure rather than a public one.
Windows will recognise there is a problem with my network but it's not been able to fix the error and it will only grant me local access to the network.
I have a 802.11g PCI adaptar in the laptop so that shouldn't be the problem. I have tried a 802.11g USB adaptar that I have for the PC on the laptop and funnily enough that will connect no problem. I don't like using the USB adaptar on the laptop too much for obvious reasons and I'm hesitant to spend more money on a new adaptar without knowing the reason my current one won't connect.
Any ideas?

There is a known problem with Sonys. Try this
It could be that your computer has IPv6 selected. Try disconnecting it as follows:
Select Start
In the search field type.ncpa.cpl and press enter.
In the new window right click on your wireless network connection and select properties
In “This connection uses the following items” section remove the tick beside Internet Protocol Version 6 (TCP/IPv6) then press OK
Left click on Internet Protocol IPv4, click properties . Check the options to obtain IP addres and DNS server address automatically.
Once done try and connect to internet.

Similar Messages

  • Why can I connect to my home network with my iPhone 5 in one room, but when I move to another it is 'unable to connect to the network'

    At home, I can connect my iPhone 5 to my home wifi network with no problems, as long as I stay downstairs.
    As soon as I go upstairs my phone disconnects from the network. I can still see the home network it in the available network lists (with full signal strength), but when I try to reconnect I get an 'unable to connect to the network message'
    If I move back downstairs it reconnects
    This has only started happening in the past week or so
    I've tried to forget and rejoin the network, but this doesn't work
    I reset my network settings on the phone. This worked for a couple of hours and I could connect to the wifi upstairs, but now it won't connect again.
    Does anyone have any ideas what is causing this?

    Sounds like your wi-fi signal strength has degraded.  Try rebooting your wi-fi router, or get it serviced.
    Do you have similar issues with any other wi-fi routers?

  • AirPort can't connect to my home network...

    Ok, I have the new WRT300N Wireless-N Linksys router, and I set it to use something like a PS2K 2 (or whatever that network security name is called). The Desktop PC found it fine and connected perfectly after I entered in my Shared Key, however, my Powerbook G4 is seemingly not able to connect to the router. I do not think it is PS2K (again, whatever it is called) compatible. The closest thing to it is WPA and WPA 2, but they still do not allow me to connect.
    The reason why I chose PSK2 is because it was highly recommended when I set up the router via Windows XP on my desktop, but it doesn't seem compatible with Mac?
    HELP.
    Cheers,
    Josh

    I'll try to find out encryption, but after that step,
    what do i do next? What is WPA2 connection if that is needed?
    Well, if you do in fact find out it is WPA (Wi-Fi Protected Access) or WPA2 then your computer should join the network and automatically inquire for a password. But to configure manually, I went into System Preferences > Network > AirPort (also make sure you are in the AirPort tab) > "By default, join: Preferred networks" > click the addition sign (AKA add network) > Enter in a network name and choose which Wireless Security to use according to the router's, and enter in the correct password/passphrase.
    A lot of networks use WEP (Wired Equivalent Privacy), which use a passphrase to generate a password/passkey that is ten digits long or something that. Talk to your administrator or whoever operates the router to find out what that key is if you are using WEP.
    The main difference between all these wireless security protocols is that one is more secure than the other. Some wireless security protocols actually decrease wireless performance, however it's almost negligible.
    What I did to clear my predicament was update my AirPort version or whatever it was that needed updating. The update read that it fixed problems with joining WPA2 networks and I was like, heck, there ya go!
    Hope that helps you along, I am just learning about this network stuff too!
    Cheers,
    Josh

  • Airport will not connect to my home network after trying to connect to my school's network. Need help!

    Airport on my Macbook will no longer connect to my internet network at home. I was on campus using my university's network today and now Airport only wants to connect to it and will not change back to my home network. It has something to do with the 802.1X, and I don't know enough about networks to know what that does. Is there someway I can just reset my entire airport settings to where it would be like the first time I used my Macbook and configured it to my home network?

    Is there someway I can just reset my entire airport settings to where it would be like the first time I used my Macbook and configured it to my home network?
    Did you Shut Down the Mac and then power it back up?  Can you connect to your home network now if you click the fan shaped AirPort icon at the top of the Mac's screen? 
    If your home network name does not appear, click Join Other Network, then click Show Networks.
    Click the name of the network that you want to join and enter the password if required
    Are you saying that you want to delete the connection to the school network from your Mac?  If you do this, you will have to setup the connection again if you head back to the school.

  • Can't even connect to my home network.

    Title says it all, bought a 64gig iPad wifi today...little did i know tons of users are having wifi problems...my problem doesnt seem to fit the others though. Most of what i've read people can connect for a bit, and after being in sleep mode then it has problems. I can't even connect to my home network. Works fine with my ipod Touch, laptop, etc. I dont have any form of security set up on my router what so ever. I plan on buying a new router soon (for reasons other than this iPad crap.) I'd really like to see some kind of resolution to this problem before i need to do that though.
    I tried all that i could out of the trouble shooting stuff. nothing worked. I even tried setting up a static IP for it. What else can be done? i really dont want to have to return it since its such a nice piece of tech.

    Umm... one of the questions that's been asked is whether his iPad will connect anywhere else, If it will, the issues is between the iPad and the particular configuration he has at home. If not, the issue is with the iPad.
    Since we don't have an answer to that question yet, your inference that anyone is telling him to "phone ahead to every business or hotel he plans on visiting to request that they replace their "clunky old router" " is unjustified and unhelpful.
    Please, continuously blaming every ipad wifi issue on the same router that happily works with every other device is getting old. What standards does iPad support that these clunky old routers do not?
    Since, as you've said in another post, you're experienced in the ways of the internet, you will know that it's quite common for new kit to have problems connecting to old kit.

  • HT4199 I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?

    I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?

    Apps and music aren't part of the backup.  App data is http://support.apple.com/kb/HT4946

  • I have a PVR which supports DLNA connected to my home network.  I want to access files on my MacBook from the PVR.  I understand that my MacBook doesn't support DLNA. Is there any 3rd party  software that I can install on my MacBook to provide DLNA?

    Hi,
    Can anyone help me please.
    I have a Personal Video Recorder (Humax HDR-1010S), which supports DLNA, connected to my home network via Wi-Fi. 
    I want to play music from iTunes and view photos from iPhoto from my MacBook (which is also connected to the home network) via the PVR / TV / Home Cinema sound system.  I understand that my MacBook (running OS X Mavericks) doesn't support DLNA server.
    Is there any 3rd party  software that I can install on my MacBook to provide DLNA server?
    Thanks,

    My recollection is that the iPhoto library has some fairly robust protections to prevent inadvertent or even deliberate changes being made that might have unwanted consequences. I'll take alook at my setup and let you know if I can see anything that might help you. Even if you get Serviio to "see" the iPhoto library, it almost ceratinly won't show the album structure and names. What I did is to export each iPhoto album to a standard folder with the appropriate folder name. These I keep on an external backup disc and Serviio can see these without trouble.

  • How do you connect to wi fi. i can t get the ipad to connect to my home network.

    how do you connect to wi fi. i can t get the ipad to connect to my home network.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
     Cheers, Tom

  • TS1398 Update iPhone 4s to 6.1.3 (10B329) now I can't connect to any wifi networks at home or at work and all car Bluetooth systems will not connect either. Help! Extremely annoyed at apple for putting out software that causes such mayhem.

    My iPhone 4s has been update as I said in subject bar.. Now can't connect to any of my cars Bluetooth systems. Also even more frustratingly can't connect to any wifi networks at home or work!!
    How can apple put out such an update that causes so much grief and inconvenience to hundreds of people. Not to mention risking lives with Bluetooth kits not working...outraged!!!!!!

    First, grow up.  Just because YOUR phone isn't working, doesn't mean Apple put out bad software.  I've not had any difficulty, nor has anyone else I know.  And just how is Apple risking lives with Bluetooth kits not working?  It's YOUR decision to talk on the phone or text and drive.  Not Apple's.
    We're users here, volunteering our time to help others.  Posts like yours, which are whiny and ranting, simply means we're likely to ignore you and not provide you with any help.  Not to mention, it makes you look absolutely foolish.
    Further making you look foolish is the fact that you haven't even asked a technical support question, nor have you provided anyone here with any troubleshooting steps you might have taken, including those recommended in the user guide.
    Good luck getting help.
    GDG

  • My iPhone 4s cannot connect to my home network, can't figure out why...

    My phone recognizes my home network but cannot join it.  I have tried the option to forget the network and then gone back in and retyped in the password, but it just keeps spinning in a circle trying to connect to my home network, but never connects?
    Both my iMac and Macbook have no problems being connected to the same network.
    Any thought on what the problem could be?
    Thanks

    Have you tried to reset all network parameters? It may help.
    Preferences > General > Reset > Reset Network Settings
    Careful, DO NOT PRESS the other ones by mistake.

  • Upgraded 4s to iOS8 and can't connect to certain wireless networks anymore

    I have an iPhone 4s that I updated to iOS 8.  Prior to update, I was using iOS 7 (whatever the latest iteration was), and was able to connect to various wireless networks. Following the update, I am no longer able to connect to the wireless network at my place of work.  It tries to connect, does so briefly, and give me an authentication request (screenshot attached). Blank username/passwords don't work, neither does the network name/password combo.  Choosing cancel will revert the connection back to 3G. 
    To try and fix the problem, I have "forgotten" the connection, re-started the phone, and neither has worked I have reset my network connections, and it worked immediately after the reset.  The phone was inactive for a while, and upon unlocking, it had reverted to 3G.  When I tried to re-connect, it gave the same errors already stated.
    I no longer have a back-up from before the upgrade, so I can't go back to 7.  My wireless connection on my home network is fine.  Nothing has changed with the work wireless since it was working with my iOS 7. It uses a WPA-Personal security, and there are several repeaters for the signal throughout the building.
    What is going on and how can I fix it?
    http://www.pinterest.com/pin/create/extension/

    Set it up as new device, make sure all the apps are updated in the iTunes library and try to use iTunes to restore it again from the latest backup:
    iOS: How to back up your data and set up your device as a new device

  • New Ipod Touch 5g can't access Internet in home network (using Linksys E4200 router). But, OK with other Wifi.

    Just bought new Ipod Touch 5g. I found out it can't access Internet in home network. not really cannot access, but very slow to open any web page, App Store failed to access, etc. But, OK with other Wifi (office & starbucks). Others existing iOS devices (Iphone4 & Ipad2) have no problem like this. I'm using Linksys E4200 router at home. anyone has any idea why?

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>GeneralReset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable

    http:/I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable, any ideas how I can resolve this WIFI issue??? TY
    [email protected]    

    Do other devices connect to your router?
    What do you mean by distant IP address? 
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -power off and then back on yur router
    - Reset Network settings: Settings>General>Reset Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • Finding out devices connected to my home network (Time Capsule)

    I have a mid-2013 mac pro and I am using time capsule, I suspect that I have some unwanted guests in my home network:-) how can I see devices connected to my home network?

    The new TC and the new Mac OS airport utility are totally useless..
    You can do it the old fashioned way with netstat scan from terminal or via the network utility (which is also now hidden so search for it).
    Grab Fing for your phone or ipad.
    https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8

  • Can't connect to my home Wi-Fi!

    I can't connect to my home Wi-Fi but i can connect to other peoples (even my schools!) My dad has an Iphone and can connect and i used to be able to but now I can't! (I can log on but it thinks that I'm not connected and won't let my into itunes, app-store, or Safari!) Please help me! I REALLY don't want to have to buy a new ipod! It's a second Generation and 8gb. i got it in December new.
    Message was edited by: iluvmyipodtouch96

    Welcome to Apple Discussions
    Since your WiFi works...
    Because your dad's iPhone can connect, he is going to be your source of information for this. It is very possible he has set up his network a certain way (like he has turned on MAC address filtering or turned DHCP off) that can make connection impossible unless there is some intervention on his part. He should be able to help you get connected.

Maybe you are looking for

  • Help! Locked out of my work computer?!

    Hello, I work for myself from home, and I am locked out of my 2010 Macbook Air. I do not remember the password, I also do not have the original installation cds that came with it. All that it says when it turn it on is my name, with a place to type t

  • Naming default files

    Recently I overhauled an existing site. I changed the name of the default files (the file that pops up when no file is indicated) from default.htm to index.shtml. Looking at the site statistics since the new site has been uploaded I see a lot of "pag

  • Finding Min and Max

    I have the following data stored in java. The names are stored as a 1 dimensional array and the figures as a 2 dimensional array. -----------------------------Min Max Joe Jones 32 22 20 10 ? ? Jim Long 10 45 10 60 ? ? Tom Doon 5 10 50 70 ? ? What I w

  • Can not get rid of the terminal

    I have a G3 Wallstreet and for the last two days when I try to start it up it open up with the Terminal. I had a program called "AppleJack" and meant to get rid of it but forgot, I have try Zaping the PRAM, Safe Startup, starting it up with a bootabl

  • Error collect amounts in ODS

    Hi gurus, I'm throwing a load from an ODS to another. I want to collect the amounts with the same key fields. When my load is small ando i only have a package, it is collecting correctly. But when I have a large data load and extract several packages