Can't connect to my home wi-fi with new Iphone 5?
can't connect to my home wi-fi with new Iphone 5
When you say it doesn't detect the network - is that under "Settings->Wi-Fi"? It doesn't show your network at all?
This may sound like a stupid question but since I've learned never to leave any stone unturned - you don't have your SSID set to "hidden" do you?
Similar Messages
-
Why can't I connect to my home WiFi network with my new iPad Mini?
Why can't I connect to my home WiFi network with my new iPad Mini when I can connect to free WiFi networks at cafes and public areas?
Try this:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
http:/I'm using 4th gen IPOD touch and the wifi can't connect to my home NTWK, it sends me to a far distant IP ADDRESS and can't connect. a building public NTWK is wifi connectable, any ideas how I can resolve this WIFI issue??? TY
[email protected]Do other devices connect to your router?
What do you mean by distant IP address?
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-power off and then back on yur router
- Reset Network settings: Settings>General>Reset Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections -
Can't connect to my home Wi-Fi!
I can't connect to my home Wi-Fi but i can connect to other peoples (even my schools!) My dad has an Iphone and can connect and i used to be able to but now I can't! (I can log on but it thinks that I'm not connected and won't let my into itunes, app-store, or Safari!) Please help me! I REALLY don't want to have to buy a new ipod! It's a second Generation and 8gb. i got it in December new.
Message was edited by: iluvmyipodtouch96Welcome to Apple Discussions
Since your WiFi works...
Because your dad's iPhone can connect, he is going to be your source of information for this. It is very possible he has set up his network a certain way (like he has turned on MAC address filtering or turned DHCP off) that can make connection impossible unless there is some intervention on his part. He should be able to help you get connected. -
Can not connect to my home wifi suddenly
Suddenly I can not connect to my home wifi connection. I have verified the password and I know that is correct. Any suggestions?
Also, I can connect just fine from my iPad just not my iPhone4s.
-
Can't connect to facebook from candy crush using my iphone 5?
can't connect to facebook from candy crush using my iphone 5
Returned home only to find the same situation with my home network. Much time on chat support with Apple. Short story long: Must have been corrupted software. Had to restore original original software then add back apps and music. Couldn't back up before doing the restore so I lost a bunch of pics, but at least the phone is working once again.
-
Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro.
Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro . If I can how do I do it and what do i need to do it.
No. There's no video input.
-
I have a 3rd generation iPod Touch and just did the update to IOS 5. Now I can't connect to my Netgear wifi router. My iPhone connects fine along with all of my other laptops etc. I have the router set with WPA-PSK [TKIP] security and an access list. I've confirmed the mac address is included on that list and that the password is correct. Under choses netwrok I select the network and it just goes into a spin. I have tried removing the password and the access list settings and it still will not complete the connection to the router thus no internet access. The routers firmware is also up to date. This thing worked fine before this update and I've already tried to restore from backup. Any ideas or is the wifi nic bad in this thing with the new apple firmware update? Any fix?
Thanks Bob, I don't know why but it all of a sudden worked a few days later. It's a mystery but at least problem solved.
-
How can I connect to a database from ipaq with cldc??
how can I connect to a database from ipaq with cldc??
Hi Again
There is a library by Mimer which allows you do connect to a Mimer SQL Server, don't know must about it, but here is a link.
http://developer.mimer.com/
If that doesn't suit you, I suspect that you will have to use some sort of proxy solution. Either by creating a servlet to accept the sql string you want to send, or by creating your own custom proxy server running J2EE. The servlet or the proxy server must be able to receive an SQL String, do the query to the actual database and return the results in some sort of format to the mobile device. Maybe just a space delimited string.
Hope this helps
-Daur -
I can not connect my wirless ley bord to my new mini mac
How can i connect my wirless ley bord to my new mini mac
Is this an Apple wireless keyboard. If so go to this link.http://support.apple.co
-
Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable
Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable (Mini Display to Thunderbolt Adapter)
Sorry but no you can't.
Only Macs with ThunderBolt ports can be used with the ThunderBolt Display and the 2009 Mac Mini doesn't have a ThunderBolt port.
Which computers can I use with my Thunderbolt display?
Stefan -
hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA
Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
On some models you need set Factory defaults to USER and turn on the RS-232.
Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
You must get this working before continuing.
You can set the COM port parameters by right clicking and selecting Properties.
(On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
On the left side, click on Devices and Hardware.
Click on Serial and Parallel.
Go to the COM port you found in Device Manager.
Open a VISA Test Panel.
Now I don't have one I can look at right now, so this is general idea:
Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
Go to the (I think) Input Output tab (you want to send a command)
The command string input should already have a *IDN? entered, if not, type it in.
Click on the Query button to send the command and check the response.
If you get an ID string back (Company name, Model, FW Version ...) then it works.
(Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help. -
I just upgraded my ip5 to ios6.0.2 and now I can't connect to the network (was fine with 6.0.1). I bought the phone online in Canada but have a Hong Kong simcard. Any solution to connect to network?
I bought mine in the US and activated using a German SIM. It worked fine first on 6.0.1. After upgrading to 6.0.2 the SIM does not work. I have reset the reset the phone and still does not work. I loaded a new SIM and the phone worked for few minutes before going to Searching mode after I restarted the device. I am being told by the Genius Bar team that this is a Hardware failure.
-
Can I connect my Mac (Mac OS X) with other machine (Windows OS) on same LAN using telnet in terminal?
For example, telnet <ip address of other machine>
I m a networking student and I have learned to connect 2 machines on Red hat Linux OS on same Ethernet LAN which has same subnet mask. As Mac OS X is also a linux based OS I m trying to connect my Mac with my friends windows based machine using telnet <ip address of his machine>. However, I get a message "unable to connect to remote host".
Can anyone please tell me is this the problem because of different OS or it is something different!
Please reply...it will of great help..The machine you're trying to connect to needs a Telnet server running on it - telnetd listening on port 23 (usually).
Incidentally, Mac OS X is not a Linux based OS, it is based on BSD Unix. -
Can I relace my BT Home Hub 2 with an Airport Extreme?
Can I replace my BT Home Hub 2 with an Airport Extreme?
No. The HomeHub has a built in modem that must be used to access your Internet service.
The AirPort Extreme is only a router. It does not have a modem onboard.
You could the AirPort Extreme with the HomeHub....but not instead of the HomeHub.
Maybe you are looking for
-
Sony DSR-1500a not recognized by Mac Pro 2009
My first post. Hope I'm doing this right.... I have been working with a Mac Pro 1,1 Quad (OS 10.5.6) using a Sony DSR 1500a DVCAM player/recorder with out any issue using firewire 400 and Adobe Premiere and FCS2. I have recently purchased a Mac Pro 2
-
Braille output now available in 5 different languages
Hello all, I have now developed packages for Braille output in four languages other than U.S. English. They're very easy to install, and allow uncontracted Braille to be shown on your refreshable Braille display using your own language's dotcodes. Th
-
I wanted to charge my iPod Touch 4G on my computer and i forgot that it automatically syncs which i didn't want it to. I cancelled the syn and when i checked my ipod it said the storage was almost full. I had 1.6GB before and it went to 46 MB?!? I ju
-
I lost my print spooler after running mulitple anti-malware programs. How do i reload? Thanks.
-
One little endian - Windows to AIX possible?
Hello all, I'm trying to find out if it is possible to use Oracle 11g RMAN to copy/convert an existing database on a Windows 64bit platform to AIX 6.1 platform. Per the10g document below, it seems the restriction is based on the endian order (32 bit,