Can't connect to my LG NAS after downloading LION

Hi all - first post.
Can't connect to my LG NAS after downloading LION. Basically thats it, since downloading Lion for some reason I can't access my NAS. Anyone got any suggestion

I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you.

Similar Messages

  • HT4528 how can i connect my phone to itunes after i locked my phone up ?

    how can i connect my iphone to itunes after i locked my phone up ?

    What do you mean by "locked my phone up?"

  • HT1688 My husband's iphone can't connect to the App store after he updated to ios.7.  He updated it yesterday and he has had problems since.  He gets a message that the iphone can't connect to the app store and he has internet connection.  Please help.

    My husband's iphone can't connect to the app store after updated his phone to ios.7. and has internet connection.

    Any update will cause problems for a few users. And those users will rush here and post "the sky is falling" stories about their experience. The 99.99% of people who have no problems after an update won't bother to post here; indeed, most of them don't even know ASC exists. FWIW, I had no problems with iOS 7 on my 4S. Your problem is most likely not related to iOS 6, but you should probably update anyway. For addressing the battery issue see this outstanding article: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • I don't know why I can't open Photoshop in my computer after downloading the file?

    I don't know why I can't open Photoshop in my computer after downloading the file?

    Did Firefox create a new profile?
    *http://kb.mozillazine.org/Recovering_a_missing_profile
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

    I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

    PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
    http://support.apple.com/kb/HT4890

  • Why can't i access the app store after Mountain Lion install?

    Why can't i access the app store after Mountain Lion install?

    Hi There,
    What happens when you try to access it?   You've not given a lot of information for people to help you.

  • Damaged software display after downloading lion or upgrading.

    Damaged software display after downloading lion or upgrading.
    When i want to upgrade my software evryting works fine.
    But after the download is done it says that the software is damaged.
    How can i fix this problem because i have done this so many times but it still stays the same ?
    Please help me ?

    Have you tried repairing your hard drive?  Reboot from your Mac OS X install disk (hold down C with the disk in the drive at startup), choose Disk Utility from the Utilities menu, select your hard drive and click Repair Disk.

  • Macbook pro running super slow after downloading Lion

    My mac book pro is running super slow after downloading Lion. Its so slow and all I see is the beach ball wait icon. Also my safari and firefox internet apps crash like crazy. What can I do? Hate it!

    Hi,
    I also have this problem. My MacBook pro was brand new in august, but i bought it just a few days before the release of lion so i installed lion after i bought it. Only used it 1 day with whatever was on it before and seemed to work fine.
    Ive been too busy to do anything about it but im very annoyed by how slow it is so i have to do something now, what can I do? can someone help with some specific steps? someone posted something about changing the network settings but I wasnt sure if that applied in europe (spain)... any guideance in non-technical terms please?
    THANK YOUUU

  • I would like to know if anyone, after downloading Lion OS, lost their Quicken 2007?  If so, what have they done to remedy the problem?

    I would like to know if anyone, after downloading Lion OS, lost their Quicken 2007?  If so, what have they done to remedy the problem?

    From the quicken website:
    Converting your data from Quicken for Mac
    Create a copy of your current Quicken for Mac data file.
    Important: You'll want to use the copy for the conversion. Do not use your original data file.
    Launch the Quicken File Exchange Utility (it's located on your Quicken Essentials disk).
    Follow the on-screen instructions to locate the copy of your old data file and then convert your data from Quicken for Mac to Quicken Essentials.
    Open Quicken Essentials.
    If you want to import your old data into a new Quicken Essentials data file that you’ve already started using (optional), make sure that the new data file is now open in Quicken Essentials.
    Choose File > Import, and then select the file that you just created during the conversion process.
    The conversion file has a .QDFX extension. You’ll find it in the same folder as the copy of your old Quicken for Mac file.

  • After downloading Lion the noise level of the fans increased. A noise which did not exist with Snow Leopard. Any ideas how to reduce noise?

    After downloading Lion the noise level of (what I believe to be ) the fans increased. A humming noise which did not exist with Snow Leopard. Any ideas how to reduce this noise?

    I have seen this mentioned a dozen times, here, on Lion,and MacRumors.
    Nope. Usual suspects.
    And whether you tried a clean install instead (backup and erase) and then use MA to import

  • Safari is now VERY slow after downloading Lion

    My Safari (which is the latest version) is now VERY slow after downloading Lion.  It takes forever for anything to load, and some pages don't load at all anymore.  Any way to fix this?  It is very frustrating!

    I've just made a change to try to keep the wifi from crashing and it also seems to give me a speed boost online.
    Go into your System Preferences, choose Network, and then in that dialog box choose "Advanced..."
    Once there, select the DNS tab.
    Click the plus sign and add the following to your list of DNS servers:
    8.8.8.8
    It's Google's public DNS and seems to have fixed both the dropping and speed issues.

  • After downloading lion my safari browser doesn't want to load. does any one know how to fix it?

    After downloading lion for my mac my safari doesn't want to reload after I close a web page, I have too restart the mac just to get safari too launch.How do I fix this problem?

    My pleasure Norbert. Let us all know if it works (and maybe give me a "correct answer" rating if it does ; ).
    P.S. I grew up in Philly too.

  • ITunes can't connect to Apple TV sometimes after sleep and wake up

    Hi!
    There are any issues to find in the discussions depending on problems between the ATV and iTunes but no solution helps me to solve the following problem till now.
    I am using a Mac mini (middle 2011) as a central storage for multimedia data. The exact description of the network can you find further down.
    The problem is that iTunes sometimes can't connect to the Apple Tv via Airplay. There is a window open what tells me that iTunes try to connect to ATV. But it doesn't work.
    After determine iTunes completely (normal closing doesn't work because of that open window) and restart it, it will work probably.
    Itunes is connecting to ATV via Airplay immediately.
    Sometimes it works for any days with a view sleep and wake up procedures. Sometimes the problem appears while I'm listen to music after any minutes of starting.
    I send the mini and the ATV to sleep with the remote of the ATV or let it go to sleep alone. To wake up ATV and mini I push a button on the remote.
    Following components are working in my network:
    - router FritzBox 7390 from AVM (2,4 and 5 GhZ at the same time)
    - Mac mini (middle 2011) connected via Wlan
    - two Airport Express with connected loudspeakers in various rooms (Wlan)
    - Apple TV (third generation) connected with home cinema via HDMI and with the network via Wlan
    - Telekom entertain setbox for TV connected via LAN over Wlan bridge
    I have tried to use the whole system with an Airport Extrem as router for wlan but the problem was the same.
    I suppose it could be a problem with DHCP Lease or the Bonjour? What can I do?
    Last but not least...the devices have installed the newest firmware or software versions.
    Thanks a lot for support!
    Norman

    i bit the bullet and re-associated library on ATV. On atv, setting/computers; current library was grayed out, clicking creates a warning that all media on ATV will be lost, it takes its time to earase the disk, then an option to connect to itunes becomes available just like fresh setup. ATV produced a code to enter into itunes. itunes complained that it cannot communicate on port 3689; googleupdate.exe was using this port; disabled googleupdate; rebooted everything for good measure. so now i'm waiting for 100GB of home movies and music to sync to ATV (thanks apple!). one thing that got me stumbled - when ATV showed up, there were not tabs for music, movies, podcast, etc, only settings and photos; solution: deselect 'automatic sync' by selecting 'custom sync' in the settings tab.

  • Can't connect to the internet right after boot up

    Hey guys, I have an interesting problem in which if I try to use internet right after boot up (via scripts) I can't resolve host names. However, if I try to use the internet right after boot up manually I can resolve host names. I had this problem with a script but I've since rewrote it to work around the problem; however I now seem to have this problem with openVPN and I need this to work. I'll use openVPN as my primary example but the situation was the same for my script.
    Basically, openVPN starts up via systemd and it can't resolve my server's host name. Even 18 hours later. I have 'resolv-retry infinite' in my conf file which as I understand says 'if you can't resolve the host name keep trying to resolve it indefinitely'. I left my computer on overnight and openVPN still could not connect to my server, despite me being able to ping it, have MySQL get data dumps and replicate from it and other software being able to resolve the server's host name. If I restart openVPN, then it works! I rebooted the computer and let it try for a few minutes to connect and it couldn't. I restarted openVPN manually and it resolved the server's host name, 5 minutes after the computer booted up even though it couldn't connect on it's own the previous night.
    Here's openVPN's status as of this post:
    [email protected] - OpenVPN connection to client
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
    Active: active (running) since Thu 2013-05-02 14:10:02 MDT; 58min ago
    Process: 248 ExecStart=/usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/%i.conf --daemon openvpn@%i (code=exited, status=0/SUCCESS)
    Main PID: 254 (openvpn)
    CGroup: name=systemd:/system/[email protected]/client
    ââ254 /usr/sbin/openvpn --cd /etc/openvpn --config /etc/openvpn/client.conf --daemon openvpn@client
    May 02 15:07:52 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:07:57 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:02 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:07 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:12 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:17 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:22 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:27 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:32 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    May 02 15:08:37 CCH001 openvpn@client[254]: RESOLVE: Cannot resolve host address: my.server.com: Name or service not known
    Here is my conf file:
    # Sample client-side OpenVPN 2.0 config file #
    # for connecting to multi-client server. #
    # This configuration can be used by multiple #
    # clients, however each client should have #
    # its own cert and key files. #
    # On Windows, you might want to rename this #
    # file so it has a .ovpn extension #
    # Specify that we are a client and that we
    # will be pulling certain config file directives
    # from the server.
    client
    # Use the same setting as you are using on
    # the server.
    # On most systems, the VPN will not function
    # unless you partially or fully disable
    # the firewall for the TUN/TAP interface.
    ;dev tap
    dev tun
    # Windows needs the TAP-Win32 adapter name
    # from the Network Connections panel
    # if you have more than one. On XP SP2,
    # you may need to disable the firewall
    # for the TAP adapter.
    ;dev-node MyTap
    # Are we connecting to a TCP or
    # UDP server? Use the same setting as
    # on the server.
    ;proto tcp
    proto udp
    # The hostname/IP and port of the server.
    # You can have multiple remote entries
    # to load balance between the servers.
    remote my.server.com 1194
    ;remote my-server-2 1194
    # Choose a random host from the remote
    # list for load-balancing. Otherwise
    # try hosts in the order specified.
    ;remote-random
    # Keep trying indefinitely to resolve the
    # host name of the OpenVPN server. Very useful
    # on machines which are not permanently connected
    # to the internet such as laptops.
    resolv-retry infinite
    # Most clients don't need to bind to
    # a specific local port number.
    nobind
    # Downgrade privileges after initialization (non-Windows only)
    user nobody
    group nobody
    # Try to preserve some state across restarts.
    persist-key
    persist-tun
    # If you are connecting through an
    # HTTP proxy to reach the actual OpenVPN
    # server, put the proxy server/IP and
    # port number here. See the man page
    # if your proxy server requires
    # authentication.
    ;http-proxy-retry # retry on connection failures
    ;http-proxy [proxy server] [proxy port #]
    # Wireless networks often produce a lot
    # of duplicate packets. Set this flag
    # to silence duplicate packet warnings.
    ;mute-replay-warnings
    # SSL/TLS parms.
    # See the server config file for more
    # description. It's best to use
    # a separate .crt/.key file pair
    # for each client. A single ca
    # file can be used for all clients.
    ca ca.crt
    cert host.crt
    key host.key
    # Verify server certificate by checking
    # that the certicate has the nsCertType
    # field set to "server". This is an
    # important precaution to protect against
    # a potential attack discussed here:
    # http://openvpn.net/howto.html#mitm
    # To use this feature, you will need to generate
    # your server certificates with the nsCertType
    # field set to "server". The build-key-server
    # script in the easy-rsa folder will do this.
    ns-cert-type server
    # If a tls-auth key is used on the server
    # then every client must also have the key.
    tls-auth ta.key 1
    # Select a cryptographic cipher.
    # If the cipher option is used on the server
    # then you must also specify it here.
    ;cipher x
    # Enable compression on the VPN link.
    # Don't enable this unless it is also
    # enabled in the server config file.
    comp-lzo
    # Set log file verbosity.
    verb 3
    # Silence repeating messages
    ;mute 20
    Anyone have any idea what could be going on? It seems to me that when a program starts up it takes a snap shot of the current network status and it then uses it, even if it's 10 minutes later and the network has been fully loaded/configured, the program uses that snap shot and can't connect to the DNS.
    Last edited by anEveryDayGuy (2013-05-02 21:20:47)

    'Requires=network.target' wasn't in it so I added it but nothing's changed. I've left it in because openVPN does require network.
    As I said, I had this problem with a script so I don't think it's anything specific to openVPN. I had a weird occurrence this morning however. When I started the computer up this morning  openVPN worked just fine. However when the computer rebooted openVPN couldn't resolve the host address again.

  • Can't connect to 10.6 Server after upgrade

    I have a Mac Mini server running 10.6.8 using kerberos as the only authentication for AFP.
    After upgrade my Macbook to Lion I can't connect to the server Sharing Points anymore. If I try to connect from Go to Server, it asks me for a password. I think I am not being authenticated via kerberos. Before Lion everything was working fine. Another computer running 10.6 client are connecting fine, so I am thinking the problem is with 10.7
    I used Login Options > Network Account Services to bind to the Server. Green Light!
    I tryed klist from terminal but no credential was found, so I used kinit username. Now it shows a credential but I still can't connect.

    I solved use to finder menu connect server to and use complete name server with domain example:
    afp://nameserver.domain.com and connected with kerberos

Maybe you are looking for