Can't connect to my printer over network anymore

We upgraded to ox10.9 and since then we can't connect to the brother laser printer connected to our other computer. I went to brother's web site and downloaded the newest driver and now when I click on "add printer" it's not even there. I don't know what to do. I reset my printers and it's still not showing up... only if I connect it via a USB. Before 10.9 I could connect to the printer over bonjour because I was connected on my other lap top..
any ideas?

I figured it out. I had to create a new location on both the Powerbook and G5 and click "Apply Now". Then the PB showed up as a server on the G5.

Similar Messages

Mac 10.9.3 I can not connect C4780 to print on network.

I recently changed router and can not install my C4780 printer to the wireless network, it use to work perfectly. In order to set it up on the new router I deleted the printer and was planning to install it as I did the last time but it wont work. I can get it to work by having it as a USB printer but I dont want that, its really annoying me!
Please please please help!!

Hi there,
Thank you for your reply! In order to get an IP Address I would recommend the following:
Restore the Network Defaults. (On the printer, select the wireless icon to access the wireless menu, and select Restore Network Defaults).
Go to the airport icon, and look for hpsetup. Once connected Adhoc, the airport icon will change to a square. only then will you be able to print out the new IP by printing the Network Configuration Page. Printing a Network Configuration Page.
The new IP will start with 169.254.. then you can go into the Embedded Web Server to run the wireless setup wizard. (To access the embedded web server, put the IP address into the address bar of Safari. Once at the Embedded Web Server click on the Network tab, then select Wireless Setup Wizard.
Hope this is helpful, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can ping and use internet, can not connect to ethernet printer on network

I have been pulling my hair out with this problem, have used proffesional support and not solved the problem to date.
1) Have Airport Express (6.3) (WEP128, Airtunes, Custom Name, all else default settings) connected via the ethernet port to an existing office network to hub/switch then ADSL modem and PC severs.
2) Have a PC laptop connected and working (now) without issues, can internet, print to ethernet printer, connect to network drives.
3) Have G5 mac (10.4.8, no fire-wall), cannot print or connect to printer, can ping printer and use internet, limited connection to network drives (BTW).
4) Can connect to printer and print when bypassing AX and pluging ethernet direct to G5.
5) Mac G5 is allocated the first available DHCP address 10.0.1.2 followed by the PC with 10.0.1.3
Would appreciate any input to this one.
G5 Mac OS X (10.4.8)

Black, Welcome to the discussion area!
The AirPort Express (AX) is creating a separate subnet and this may be causing problems. Configure the AX so that the option to distribute IP addresses is DISABLED.

IOS devices can't connect automatically to known wifi network anymore (only manually)

Hi there.
Just changed my old wifi router belkin 54g with a new sitecom 300n X2 (with 802.11n); after the change all my iOS devices (iphone4, ipod touch and ipad2) are not able anymore to automatically connect to my wifi network.
The network is recognized and after inserting the password the devices connect perfectly to the network, but if I switch off the wifi interface and then i switch it on again the devices don't connect to the known network automatically, I have to tap on my network in the list to join it, even if password is not requested anymore (just once, when connecting for the first time). My Macbook and other Android devices are automatically connecting fine.
I tried to forget the network and reconnect to it, I did a reset of the network stack under Settings->General->Reset, I did a device reset but nothing worked.
I even tried to limit channel bandwidth of the router to 20 Mhz (suggestion found in a forum) but no success, and I also changed the wifi channel to avoid interference, but again no success.
Any help will be really appreciated.
Thanks a lot and regards.

Hi there.
Just changed my old wifi router belkin 54g with a new sitecom 300n X2 (with 802.11n); after the change all my iOS devices (iphone4, ipod touch and ipad2) are not able anymore to automatically connect to my wifi network.
The network is recognized and after inserting the password the devices connect perfectly to the network, but if I switch off the wifi interface and then i switch it on again the devices don't connect to the known network automatically, I have to tap on my network in the list to join it, even if password is not requested anymore (just once, when connecting for the first time). My Macbook and other Android devices are automatically connecting fine.
I tried to forget the network and reconnect to it, I did a reset of the network stack under Settings->General->Reset, I did a device reset but nothing worked.
I even tried to limit channel bandwidth of the router to 20 Mhz (suggestion found in a forum) but no success, and I also changed the wifi channel to avoid interference, but again no success.
Any help will be really appreciated.
Thanks a lot and regards.

Can I connect a wireless printer to two wireless networks

I searched and couldn't find an answer to this exact situation. The answers to similar questions didn't seem to work.
Can we share a wireless printer over two wireless networks without adding hardware or changing the wiring or doing complicated software modifications?
Here is my set-up:
Cable Modem> Linksys Wireless Router “N” on the first floor > older AirPort Extreme “G” via ethernet cable on second floor > Laser Printer via USB Cable on the second floor, plus an AirPort Express to extend the area on the second floor. We have 2 MacBooks and 1 MacBookPro that connect to the internet via either of 2 wireless networks. Generally, for better connection, you choose “N” if you are on the first floor and “G” for the second floor.
Currently, if you want to print to the USB Printer, you just select it in the print dialog box. It does not matter if you are on Network “N” or Network “G.”
We just added a new wireless Printer that’s on the first floor. (No, I didn't read the directions, the printer screen said if there is a W?? button on your router, press it. I did and it automatically connected to the “N” network. It also has its own email address for printing without a computer, but that still doesn't solve this question.)
If you want to print to this printer, you must first change the computer’s AirPort setting to join the “N” network. If you don't, you still get the print dialog box, but eventually you will notice that nothing happens. The document just sits in the Printer’s queue.
Is there a way to get a computer on the “G” network to find the wireless printer on the “N” network without first changing networks?
Remember, it automatically finds the USB printer that is plugged into the “G” network router.

It used to be that if you wanted to wirelessly extend the range of a network, you'd have to set up a WDS. (WDS = Wireless Distribution System.) There was no "Extend a wireless network" option and no "Allow this network to be extended" checkbox—you'd have to fill out lots of WDS information yourself. It was sort of a pain.
Then, with the 802.11n AirPorts, Apple introduced the "Extend a wireless network" option, greatly simplifying the setup process. It accomplishes the same thing as a WDS, but it's easier to set up and has less overhead. However, it can only be used if every AirPort in the wireless network supports 802.11n.
Your Express may support 802.11n, but your Extreme is older and does not. So "Extend a wireless network" won't work for your network. That's why you got errors when you set the Express's "Wireless Mode" option to "Extend a wireless network." Instead, you'll have to do things the old-fashioned way* and configure the Extreme and the Express to be part of a WDS. Your network will still work as desired: the Express will rebroadcast the signal from the Extreme, and clients will connect to whichever station has the stronger signal. It's just that you'll be using the older WDS technology instead of the newer "Extend a wireless network" feature.
"Join a wireless network" is something different entirely. You'd use it if you wanted to connect to a network but not rebroadcast it. This could be useful when, for instance, your main router isn't an AirPort but you want to use AirTunes. In your case, however, this option wouldn't be very useful.
Look at [this thread|http://discussions.apple.com/thread.jspa?threadID=2588489] for more information.
*Actually, the old-fashioned way would be to use modems. Or to forget about the internet and send snail mail instead.

Can't connect computers to printer (b210) via network because there are "other networks"

I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Photosmart D5160 printing over network

I have a Photosmart D5160 connected to a Dell desktop PC running Windows 8.1 64bit, and 2 laptops, a Toshiba running Windows 7 Ultimate 32 bit and a newer Sony running Windows 7 Pro 64bit.
From the Toshiba I can connect to the printer over my wifi network and print happily. And this used to be the case for the Sony laptop as well, but recently that has changed. I can still connect to the printer connected to the Dell over wifi, but I cannot print. The print jobs get stuck in the Sony's spooler and eventually disappear without printing. If I connect the printer directly to the Sony it works fine.
I have tried deleting and reconnecing to the printer over the network. I have tried running the Printer Install wizard, but that doesn't find the printer if it's not USB connected.
Comparing the properties of the printer on the Toshiba and the Sony, the driver list is different - partly because the Toshiba is 32 bit and the Sony 64 bit. But the driver list on the Sony is the same for the printer whether it is USB or network connected.
Help please!

Oh, and Print & Scan Doctor only finds the USB connected instance of the printer, not when it is connected over the network

Can't connect to my home WiFi network

I'm using a linksys router and using WEP security. The iphone can see my network, but when I enter the password it tells me I can't connect. I can't seem to make the phone forget the network so that I can start over.
Any help would be appreciated

I have the same problem. I can't connect to any password protected networks. I type in the correct password, but I'm unable to login. I don't have the option for the iphone to forget the network, because I've never been able to log in and therefore there is nothing to forget. The option doesn't even come up. Is anyone else having this problem? It is this way for 2 different networks.

Can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously

I can't connect Airport Express wirelessly to network so that AirTunes and internet are available simultaneously. My old AE allowed this but can't make the new one work that way.

In your instructions, you say to use the same encryption type as the router has set up. well, I am using the WEP 64 bit encryption and the Airport Utility does not have this...it has 40 bit. Is this a problem, or do I have to be using a the same type of encrytion ?
WEP is available in either 40 or 104-bit, but is usually "advertised" as either 64- or 128-bit respectively. For example, 64-bit WEP uses a 40 bit key (also known as WEP-40), which is concatenated with a 24-bit initialization vector (IV) to form the 64-bit RC4 traffic key. So, WEP 64 on the Linksys & 40-bit is equivalent.
What concerns me more is the loss of bandwidth performance you are experiencing when connecting the AX. When the AX is configured as a wireless client it is acting just like any other wireless devices (computer, laptop, printer, etc.) and not like another router. This should cause little or no bandwidth loss. True the more secure the wireless encryption used WPA2 vs. WEP, the more overhead is required for security, but the differences you are seeing seem excessive.
It is very possible that you may have some form of Wi-Fi interference in the immediate area that is preventing your Linksys from providing a good clean signal.
I suggest you perform a simple site survey, using utilities like the following to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible:
For Macs:
o MacStumbler
o iStumbler, or
For PCs:
o NetStumbler

How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

How to Downgrade OS X Yosemite Back to OS X Mavericks

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

HT4199 Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
Step 1
Back up all data.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
Reset the System Management Controller

I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

I can sometimes connect to my Wi-Fi network, but sometimes the name of the network doesn't even appear when i try to find available networks. Is it possible that my software is too new for the network?

It may be your router is to old. Good read:
http://www.wi-fiplanet.com/tutorials/7-tips-to-increase-wi-fi-performance.html

Can't connect to FaceTime, check your network connection try again

Can't connect to FaceTime, check your network connection an try again keeps coming up when logging in

1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

Can't connect N73 to PC over bluetooth

I can't connect N73 to PC over bluetooth with new Nokia PC Suite v6.84.10.4, I get this message "Cannot use the connection type. Check that all the needed hardware,software and drivers are available". This happened after I instaled new version of PC Suite and the patch to v6.84 didn't help.

I think the problem is in bluesoleil software It looks like PC Suit does not work with latest IVT Bluesoleil version 3.2.2.8. I tried with and witout patch and I even installed older version of PC Suite that worked before with older version of bluesoleil....

Can't connect to my printer over network anymore

Similar Messages

Maybe you are looking for