Can't connect to my Synology NAS server

Hi
I just bought a Synology D212j. I am having hard time to connect to it trough afp or smb.
My issue is that when I go to connect to server (Command K) and browse the network, I can see the NAS. When I go to "connect as" it times out and says "connection failed".
I have tried to disable the firewall on synology but still the same problem.
Any clue?...
Thanks

I don't know how I missed that. I set it to sync all my email accounts and everything worked except the one I was trying to do originally. For some odd reason, after being online for 30 minutes or so it snapped to life and has been working ever since. Must be something about that particular account that is a bit off. Anyway, after it started working I went in and looked and the settings and they were the same ones I've been using all along. I couldn't check the password, but according to my notes I had set it correctly. Thanks for your help.

Similar Messages

  • Can't connect to the modem's server.

    Hi guys, I have a major problem.
    When ever I connect to the internet with my modem, it works. But, when I connect to internet with my router and modem, I can't connect. But I have solved my problem by resetting both, my wireless router and modem. Then after I reconfigure my wireless router all I need to do is to log into my modem's server. But I can't connect to the modem's server. I tired logging in with "admin" (being the password) but I still can't connect to it.
    I am using: Verizon Broadband Network
                     Ultra RangePlus Wireless-N Broadband Router model: WRT160N
                     Westell modem model 6100
    What is the problem? Has anyone experienced this problem before?
    Message Edited by machg on 04-11-2009 07:10 PM
    Solved!
    Go to Solution.

    You will not be able to log  into the modem as long as the router is plugged in
    You must configure the modem first to bridge mode,then plug in the router and log into it
       1.)unplug router and have only the modem in
           go to 192.168.1.1 enter
          that will take you into the verizon modem/ if you have reset the modem then your user is; admin
                                                                                                                         your password is ; password
         once you lopg into that it will ask you to change the username/password
          just type in ADMIN in all 3 blanks
    now you are logged into the modem;;;;;;go to network at the top,then network connections on the left,broadband connection ,you will then put your protocol on bridge/routed bridge,
    now go to wireless settings at the top and make sure wireless is turned on
    you have the option to set up a security key on basic security settings
    once your modem  resets then plug in your router,you are now in bridge mode and the modems connection has moved to your router.  you must restart modem and computer for everything to take effect....
    also make sure and refresh your network list on your laptop
    Hope this works 

  • Can I connect my application to mssql server

    Can I connect my application to mssql server ?

    nioe wrote:
    Something more specific, my search on Google does not appear something abuot mssql
    Perhaps you could help the process along by being a little more specific. Is this an in-house application. Will it ever leave your local network? Or does it need to run over the internet? Regardless, the best option will likely be some type of REST web service that any client can use.

  • Can't connect to my LG NAS after downloading LION

    Hi all - first post.
    Can't connect to my LG NAS after downloading LION. Basically thats it, since downloading Lion for some reason I can't access my NAS. Anyone got any suggestion

    I have the same problem with my Conceptronic CH3HNAS and have found a free and easy solution.
    Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
    I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
    I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
    Hope it helps you.

  • Can't connect to the window application server.

    I have installed the Sun Secure Global Desktop Software 4.2,
    the client can connect to the unix application server but can't connect to the window applicaiont server.
    What can i do?
    Thank you.

    Hi.
    Are you sure you're using a Windows server which support Terminal Services? In other words, try (on the Windows server) by escaping to the CMD prompt and issue the
    netstat -n
    command as to see if port 3389 is listed in LISTEN state.
    Best,
    Rob

  • How can SQLDeveloper connect to 10g DB on server but UI cannot

    How can SQLDeveloper connect to 10g DB on server but the User Interface on local laptop cannot? What does the UI need that SQL Developer doesn't need?

    What kind of UI are you talking about?
    SQL Developer can use different type of connection method to connect to Oracle database.
    For example, basic method of SQL Developer is JDBC Thin connection, in which case, SQL Developer will use JDBC driver that come with it, don't need any other thing installed.
    SQL Developer also can use TNS method which will require Oracle client installed and TNS names configured.

  • Can't connect to the Software Update server (lionserver.t3m.private)? Please help!

    Has anyone experienced this; Can't connect to the Software Update server (lionserver.t3m.private)?
    I can no longer sync my iPhone as it needs an iTunes update. When I select update software and I get the error message above.

    If you are getting the error message "Unable to check for update" when you try an OTA (over the air update)
    Change DNS Servers
    Settings -> Wi-Fi
    Click the blue arrow on your connected network
    Delete everything in DNS and replace it with 208.67.222.222, 208.67.220.220
    Try again
    If this works, you will probably want to remove the WiFi network using "Forget This Network" and then reconnect to it to get your original DNS servers back. Alternatively, make a note of the original DNS servers before deleting them and replace it after you are done.
    If you are getting the error message "Unable to check for update" when you try through iTunes
    On your Mac
    Choose Apple menu > System Preferences, and then click Network.
    Select the network connection service you want to use (such as Wi-Fi or Ethernet, unless you named it something else) from the list, and then click Advanced.
    Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 address for the DNS server.
    208.67.222.222
    208.67.220.220
    You can Google Public DNS if you want
    8.8.8.8
    8.8.4.4

  • Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server

    Hi,
    Our remote users had been connecting to our Exchange server at our office since the Exchange server was installed in 2011.
    Starting last Wednesday, Outlook 2010/2013 clients, outside of our main office, can't connect to our Exchange 2010 server.  Outlook kept asking for a username and a password.  At the same time, entries of Event 4625 were generated on the Event
    log on out Exchange server. 
    Events 4625 has the following properties, "Logon Type: 3", "Failure Reason: An Error occured during Logon.", "Status: 0xc000006d", "Logon Process: NtLmSsp", and "Authentication Package: NTLM".
    By the way, I had used a laptop to test this problem.  Its Outlook work fine ion the main office, but it won't work outside of our office.
    Does anyone have any idea?
    Thanks.
    Johnnie :(
    Johnnie

    http://blogs.technet.com/b/rmilne/archive/2015/03/17/update-015_2d00_027-revised-_2800_3002657_2900_.aspx
    For additional people reading this thread, please update to v2 of that update.
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Safari can't connect to the web proxy server (HTTP)

    Hello,
    I have following problem. I need to connect to the internet using a proxy server. I went to System Preferences/Network/Wi-Fi/Advanced.../Proxies. Then, I selected Web Proxy (HTTP) and enetered server's IP address and port. It looks like I did everything correctly, but Safary can't open any page because "Safari can't connect to the web proxy server (HTTP)". Does anyone know how to solve this problem?

    There are three possibilities:
    1. You entered the wrong address and port number for the proxy.
    2. You entered the wrong user name and password, if applicable.
    3. The proxy doesn't work or is incompatible.

  • I can't connected to the apple tv server

    I can't connected to the apple tv server?????

    Hello Dinaabiy,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
    Apple TV: How to restart your Apple TV
    http://support.apple.com/kb/ht3180
    If you can't restart your Apple TV because it's unresponsive, try the following:
    Hold down Menu and Down on the Apple Remote for six seconds, and then release when you see the indicator light on the Apple TV blink rapidly.
    Unplug the Apple TV power cord for three seconds, and then plug it back in.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Can't connect you the X11 window server

    Hi all!
    I am having problems eom to show reports in the BEA with Crystal Reports.
    I use BEA WEBLOGIC PLATAFORM 8,1 for Linux with Crystal Reports XI.
    I configured server BEA to initiate as a service in my Linux SUSE, and therefore I do not use myself in the graphical way.
    However when I try to visualize some report of crystal JSP page, I receive the following error:
    <code>
    Can't connect you the X11 window server using ':0.0 ' the value of the variable DISPLAY
    </code>
    With the reports me this error only occurs, therefore I have you vary webservices and paginas that function perfectly.
    Already I read some topics of the forum related with this problem, but no similar to mine or that it decided my problem
    Somebody could help me?
    Obs:I am brasilian and my English no is good!
    Sorry!

    Hi Vitor,
    May be this will help
    1) Setting the DISPLAY variable using script or in cell by issuing,
    setenv DISPLAY=<machine name>:0.0
    or
    export DISPLAY=<machine name>:0.0
    where <machine name> is the IP or name of the machine that has a graphics server process running, like X11.
    If you migrate your aplication to a different server, maybe the fonts put on the /fonts directory won't work fine...
    Sample:
    setenv DISPLAY=localhost:0.0 export DISPLAY
    results in setting this variable for only that script process or for the cell with the local scope.
    Use the xhost + command to make this variable to global scope with above.
    The link has many workarounds
    http://forum.java.sun.com/thread.jspa?forumID=57&messageID=1973308&threadID=280804
    Thanks
    Vimala

  • Vista users can't connect to 10.5.6 Server

    Hello world...
    I have a problem connecting users running Vista to Mac OSX Server 10.5.6; I've done a search here but I didn't find anything useful.
    When Vista try to connect to the server with a valid username/password it is rejected, but if I try to connect from a XP client it connects without any problem.
    Anyone can help me?
    Thank you
    Stefano

    If you don't want extensive details around Microsoft Windows variants and offerings, please stop reading now.
    Microsoft Windows XP has (had?) Home, Professional, Media Center Edition, Tablet PC Edition, Professional x64 Edition, and the Windows Vista flavors include (included?) Starter, Home Basic, Home Premium, Business, Ultimate and Enterprise Edition, and the Windows Server 2003 variant has (had?) 32-bit, 64-bit x64, and 64-bit Intel Itanium variants, and has (had?) Web, Standard, Enterprise and Datacenter editions.
    Caveats: The Microsoft product offerings list has very likely changed since I researched this particular list of Windows offerings a year or two back. Some packages that I suspect are no longer offered include Windows XP 64-bit for Itanium, and probably some others. There are cases where the names of the various Windows editions have changed, as well. These Windows editions can and often do vary in capability and platform support, and in regional availability. And I haven't been looking at the MS-DOS-descended platforms; only at the NT descendants.
    Not all of these Windows variants have the secpol.msc tool. AFAIK, the Windows XP Home and Windows Vista Starter and the Home variants do not. I'm not sure about Windows XP 64-bit for Itanium as I wasn't running that for very long; that was probably the Professional variant, so it would have had the secpol.msc tool.
    When presented with the basic "I can't connect to CIFS/SMB/Samba share or a NAS device" problem report, I usually edit the registry key for the user. That tends to works on more of the variants than the secpol.msc tool. But both are valid approaches.
    Please check with Microsoft for the current Windows product offerings, features and related details. And for the correct means for adjusting NTLM authentication. In particular, do read the Microsoft knowledge base articles including [KB954387|http://support.microsoft.com/kb/954387], and various others.
    Now if y'all will excuse me, it is time to go debug some Cocoa code.

  • Can't connect to external MS SQL server

    I have two primaries and an external db. The two primaries were updated from 11.2.3 to 11.3. Everything is working great and the upgrade was successful.
    My database runs on an external MS SQL server. It hosts both the zcm database and the audit database.
    When I installed ZRS 5 I pointed it at one of my primaries. The install says it was successful and it appears to have successful pulled in my configuration for both zcm and zcm_audit to /opt/novell/zenworks-reporting/conf/zrs-configuration.xml.
    I can log in to ZRS 5. When I try to create a report or run an existing report from the library I always get a connection error. It definitely looks like it can not connect to my external MS SQL db. I cranked all of the logging under Server Settings to DEBUG but I can not seem to find the logs.
    I also tried following the Cool Solution using the downloaded zip and pointed it at my external db. It would not connect either. I know the username and password is correct and I tried the username in different styles: username@server, server\username, username. The only thing I can think of is my sql password for both of my users contains an extended character ! and =.
    Any help as to where to look or what might be the issue is greatly appreciated.
    Thanks in advance,
    Jeff

    I'm not sure, but I may recall hearing that it requires SQL Server Auth
    Credentials.
    Again I'm only about 51% sure here.
    "jcrawfor" wrote in message news:[email protected]..
    I have two primaries and an external db. The two primaries were updated
    from 11.2.3 to 11.3. Everything is working great and the upgrade was
    successful.
    My database runs on an external MS SQL server. It hosts both the zcm
    database and the audit database.
    When I installed ZRS 5 I pointed it at one of my primaries. The install
    says it was successful and it appears to have successful pulled in my
    configuration for both zcm and zcm_audit to
    /opt/novell/zenworks-reporting/conf/zrs-configuration.xml.
    I can log in to ZRS 5. When I try to create a report or run an existing
    report from the library I always get a connection error. It definitely
    looks like it can not connect to my external MS SQL db. I cranked all
    of the logging under Server Settings to DEBUG but I can not seem to find
    the logs.
    I also tried following the Cool Solution using the downloaded zip and
    pointed it at my external db. It would not connect either. I know the
    username and password is correct and I tried the username in different
    styles: username@server, server\username, username. The only thing I
    can think of is my sql password for both of my users contains an
    extended character ! and =.
    Any help as to where to look or what might be the issue is greatly
    appreciated.
    Thanks in advance,
    Jeff
    jcrawfor
    jcrawfor's Profile: https://forums.novell.com/member.php?userid=3343
    View this thread: https://forums.novell.com/showthread.php?t=476344

  • Can't connect to my work exchange server 2003

    I am one of the only people in my office with a Mac and my IT dept. refuses to assist me. Therefore, I am forced to try to resolve issues myself (which is not working out).
    I have successfully sent mail through the company's outgoing mail server, but I cannot connect to the incoming mail server to receive my messages.
    On a side note: I have entourage 2004 running successfully with no problems other than the program is crippled compared to outlook on windows. I want to run Apple's Mail program but can't get working, and I'm sick of running Outlook through Parallels.
    To configure Outlook and Entourage all I need to put in is the exchange server path (and login info) and it configures the rest. So how do I know what the outgoing and incoming paths are for Apple Mail? Are they the same? I right now I have both the incoming and the outgoing set up with the same exchange server paths hwmxmsg05.hotels.ad.**.com.
    Any Ideas? Another post mentioned make sure certain things are configured on the server side? What would they be as I need to relay them to someone who knows.
    Thanks!!!
    24" iMac Mac OS X (10.4.9)

    I feel your pain. I also am a lone Mac user in an entire building full of PC robots, and the IT people haven't got a clue.
    I've been trying to get Mac mail working with the Exchange server here, but it's just not happening. I've managed to get Entourage working though, which is far from ideal but significantly better than the web-based version of Outlook that I'd been having to use up till now.
    For entourage, then yes - the incoming and outgoing servers are the same. You may need to ask your recalcitrant IT people which port numbers to use, but give it a whirl anyway.
    Best of luck,
    Boris
    UK

  • How can i connect windows(laptop) to lion server?

    Hi..
    We in our company use mac's as clients. We use Mac OSx 10.7 lion server. We have a lenovo laptop for general purpose. Now can we connect that laptop in network. So that can we remotely use mac screen sharing.

    Are you asking how to connect to FileSharing from the PC ?
    Or are you asking about screensharing?
    On Server
    If file sharing, edit the SharePoint and make sure that
         Windows File Sharing (SMB) is enabled
    On the PC:
    Map a network drive
    \\10.0.0.1\Share
         (your IP and the share name)
    Make sure you check the box to use another account or user/password
    It will then ask you to enter a password.
    In general, the above should work.
    There are some cases where it requires a few other tricks.
    Good Luck

Maybe you are looking for