Can't connect to my wifi network when external monitor is connected
The computer is a very new Retina Macbook Pro. The monitor is an older Alienware/Benq 20" (3:4) LCD. I'm using a DVI to mini-displayport adaptor and plugging into the thunderbolt ports on the Macbook Pro. Router is a Belkin F5D8233 Wireless N router. As soon as I connect the monitor my connection to my wifi network times out and refuses to let me connect (every attempt just results in a "connection timed out" error). However, I was surprised to find that I could connect to my neighbor's network without any issue. Anybody have any idea what the issue could be?
Maybe related to bullet #7 here http://support.apple.com/kb/HT1365.
Similar Messages
-
my ipod 5 was just recently stolen in a waterpark (same with my best friend) and when i went on to find my ipod I pressed play sound and lost mode but it never successfully did all those things because my ipod wasn't or isn't connected to a wifi network as it says in the app. so how will I ever find my ipod if it never is going to connect to a wifi network without the thief accessing my ipod (I have a passcode). and also when I check the app once in a while it says ipod is online but cannot find location, so does that mean the thief is using my ipod or is trying to get in?
Yo are correct. It has to connect to internet for the FindMyiPhne features to be transmitted to the iPod
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
MacBook Air is getting hot when external monitor is connected - restart solves the problem
I have a two weeks old Mac Book Air 11" (128GB / 4GB / i5). Sometimes when I connect it to my external monitor, the FAN is getting loud and the MacBook becomes very warm on the surface near the "F3 button". The activity monitor says CPU is at 0-1% and there's no process that causes any CPU load (I switched to "show all processes" of course). Nevertheless something makes the Mac becoming hot. A simple restart while the external monitor is connected solves the issue completely, temperature and fan speed are instantly decreasing. Is this a issue related to the graphics driver? For me it seems the behavior is caused by the graphics processor rather than by the i5 CPU as activity monitor does not show any process causing high CPU load.
Known issue?
Thanks!I was runnig into the same problem. Plugging in to the apple 23" display at work worked well, but when I plugged in my Dell 23" at home the fan started being noisy...
ALTERNATIVE SOLUTION: it seems to me that putting the air to into SLEEP MODE and back solves it as well!!
I will confirm later on. -
Mac not connecting to a wifi network when trying to reinstall OSX using Internet recovery
Hi guys. I'm using a Macbook Air(late 2010 model) and seem to have some trouble reinstallling OSX 10.8.5 using Internet recovery. When I'm trying to reinstall the OS running the recovery mode, the wifi is not connecting. After some trials I noticed that when I run the recovery mode, the network settings are automatically going back to defualt ( I use manual IP address and everything but in recovery mode it falls back to 'Using DHCP'). Just let me know if I'm supposed to provide any other information. I request everyone to help me with this. Thanks in advance.
I reccomend to set ur router back to dchp and after you are done with recovery set it back to manual ip. Or if you have the DMG of the ur installation, create a bootable installation disk. Several tutorials on youtube based on your OSX version and reformat that way.
-
How can i connect to a wifi network with no internet connection?
I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?nikhildhoot wrote:
I used to be able to connect my Z10 to a wifi network even when the network had no Internet connectivity when i got my phone in Feb. 2013 (10.0) However ever since the 10.1 update this has stopped working. I cannot connect to my wifi network when there is no Internet connection. I cannot play videos / music from my phone to my tv/music system or connect to my laptop. However my laptop and tv communicate just fine through the same network.
Can anyone recommend anything for this?
Your saved wifi networks should connect automatically whether internet is available or not, you may receive a notification "there appears to be no internet connection".
Update to 10.2, if not available from your carrier then use Sachesi (see other threads). -
I can't connect to the router in my home. The Ipad seeks the network but nothing happens. I went to school and connected to their WiFi network as usual with no problems. When I returned home I could not connect to my home router. The Ipad seeks the router number but nothing happens. I rebooted the Ipad a few times in the school. The numbers identifying the router, etc. on my Ipad no longer appear there.
TThe Ipad guide says to connect to the WiFi use setup but I can't find the setup program in the Ipad.
I reset the network settings to the factory defaults but this doesn't fix the problem.
What can I do to reconnect to my home router?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Why can't iPod connect to wifi network when iPad and Macbook can?
Why can't my iPod connect to wifi network when iPad and Macbook both can? Connected in the past, but not for the past week.
- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off andthen back on the router
- Power off and then back on the router.
- Reset network settings>Settings>General>Reset>Reset Network Settings
iOS: Troubleshooting Wi-Fi networks and connections -
Why can't I send e-mail when connected to some WiFi networks?
At times when I can connected to other WiFi networks, I cannot send e-mail.
I'm not sure if this is something in the settings for my e-mail, or related to the WiFi network.
I am able to receive e-mails at that time.Check that you have set up the OUTGOING server as well as the incoming server. Follow the instructions in this technical support article to get to your outgoing server configuration. If none is configured, use the instructions to add the outgoing server according to your email provider's instructions. If one is configured, verify that it is set up correctly.
-
Hi
When I try to connect to my wifi network I receive message "Unable to join network "Netgear" this starated as of 8/16 before thsn I never had this problem
connecting to this network previously .I have attempted after manually entry of DNS still nothing a;so did the network reset, and full reset of settings and still
get nothing I even have my network unsecured at this very moment still nothing changed it does not show the network info ; no DNS address or anything any suggestions- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points -
when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?
you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues. -
Hello all, I could use some help with my iPhone 4, I hope this is the best place to ask!
The Problem:
I want to do a full backup of my iphone to either itunes or to icloud. Unfortunately the iphone got wet and isn’t working properly. The phone turns on and still works, but the touch screen no longer works. I have a passcode lock on the phone so iTunes will not allow me to backup it up until I type in the passcode (which I cannot physically do). WiFi had been turned off before it got wet so it won’t connect to any known WiFi networks either to backup automatically to iCloud.
What happened:
I had been travelling for 6 months and went tubing on a river with my iphone in a dry bag. Unfortunately the dry bag failed and filled with water ruining my iphone.
What I’d like to do:
It’s an old phone and I was planning on buying a new iPhone anyway. I would love to do a full backup to either iCloud or to my computer so when I get a new iPhone I don’t lose anything. I’ve already connected it to my PC and downloaded all the photos and videos off the phone so at least I haven’t lost that, but I would like to be able to recover all the text messages, WhatsApp messages and notes I had created during my 6 months of travel.
The last time it was backed up to my pc or to icloud was in April, so there are 6 months worth of very meaningful data I would love to keep to remind me of my travels!
Is there anyway to force a full backup of the iPhone without typing in my passcode lock or is there anyway to force it to connect to a WiFi network so the phone can backup to iCloud??
iTunes recognizes the phone just now and I tried upgrading the phone to iOS7 in the hopes that it would first backup and then upgrade. Unfortunately all that happened is the phone upgraded to iOS7, but it didn’t backup to iTunes. Now the phone is stuck at the iOS7 welcome screen and I can’t do anything else with it.
Any ideas or tips would be welcome!
NOTE: This is NOT a jailbroken iPhone.If there is no other way around this, is there anyway to completely wipe the phone then??
The Apple store agreed to give me a new iPhone 4 as a warranty replacement for $150 (I travel a lot and I have a factory unlocked phone, so this is still worth it for me). But before I trade it in, I would like to make sure all my data is backed up on the device first.
When I try and restore the phone now on iTunes, it says I have to turn off Find My iPhone on the phone first before I can restore it. Now since I can't use the screen I can't really do that.
So how do I completely wipe the iPhone???
Thanks! -
Can't Connect to any WiFi network
I just got my iPhone yesterday and I'm already having a serious problem,I can't connect to any WiFi networks.
I can see the networks around me and I can select networks that I've setup and I know are open or I know the security passwords, I can even enter the network passwords for the ones that require them and it accepts them without complaint. When I select a network I get a little check mark next to that network which I assumes means it should be connected to that network. However, the iPhone never actually connects to them, i.e. no IP address, no router no nothing in the network settings screen for each network, and always appears to the using the Edge wireless network when accessing the internet.
I've tried DHCP and static IP but neither works.
I updated the phones software to 1.1.4, has anybody reported problems like this with this or any version of the software.
Any help would be much appriciated.
If I can't get this resolved today I'm returning to the AT&T store tonight for a new one.
Thanks
Matt S.theevilone,
I have personally used an iPhone with routers from D-Link, Netgear, Linksys, Apple and Belkin.
Some routers, regardless of manufacturer need to have their firmware updated. Generally speaking if you look at the release notes, the same updates that resolve issues with DHCP for game systems and PDAs, also resolves them for the iPhone.
In addition hardware or MAC address filtering can cause issues where you connect to the network and not get DHCP.
Hope this helps,
Nathan C. -
On the wifi settings it shows that my ipod is connected to a network, but when I try to open safari it does not open it, because it says its not connected to wifi
You may not really be connected to your WiFi network.
Your router may not have given your iPod a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc. -
I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
So two questions, does the Bridge mode give a better wifi signal then double NAT?
Why will sonos not connect to the network when in Bridge mode?A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482 -
Can't connect to other Wifi networks although it works at home
My curve is configured to 'wifi preferred' and shows UMA signal when in my home - using BT Home Hub. Recently I tried to connect to a hotel wifi and my mum's Orange Livebox. Both are now stored on my BB as available connections but Active WiFi connection is showing 'none'. I can't work out how to get it using the Wifi instead of my data plan.
I've read some threads recommending 'hotspot' setting but not sure if this will restrict me to WiFi only? Of course, I would like it to automatically switch back to my BT hub once home. Have done battery pull but no different.
Am at my mum's at the moment if anyone can help please!
Thanks.Some hotspots require you to log in before you can actually access the internet. Once you do a scan, and connect to the wifi network then you need to open the browser, and go to the Bookmark screen and click on "wifi hotspot login."
Not every wifi network is compatible with every device so some hotspots just may not work.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!
Maybe you are looking for
-
Hi experts, I have the following requirement: 1. In transactions ME51N / ME52N, the long text field for the item (Item Text) must be made read-only if the PR is already approved / released (release strategy indicator = '2'). 2. The PR workflow approv
-
We've installed 10G and Portal. It works well when its running. Every morning however, some part of the service in the application gets hung up, making the portal unavailable. The server has never needed restarting...only the services? Any clues? An
-
Who i can upgraed my mac from 10.5.8 to 10.6, who i can upgraed my mac from 10.5.8 to 10.6
who i can upgraed my mac from 10.5.8 to 10.6
-
I have a stored procedure that currently works fine. The procedure counts to 25 and returns a number when a "1" is present in that place value. My problem is that I need to change the procedure to count to 100 and return a number when a "1" is pres
-
In Tcode 'F-02'. I want to post some doc type without affecting the allocated budget. If somebody can help me with the BADI. I have found one FMAVC_ENTRY_FILTER but its not giving the desired output when i mark skip posting flag as 'X'. its still pos